ANZHLE Defender L663 Central-Mounted Clock Speaker

Contents

ANZHLE Central-Mounted Clock Speaker Instruction Manual

Model: For Land Rover Defender L663 90/110/130

Thank you for choosing ANZHLE. This manual provides essential information for the safe and efficient use of your new Central-Mounted Clock Speaker.

1. Introduction

The ANZHLE Central-Mounted Clock Speaker is a multi-functional instrument panel upgrade designed specifically for Land Rover Defender L663 models (90/110/130). It integrates a clock, speaker, and various vehicle data displays including altitude, compass, pitch, and vehicle body posture, all accessible via touch selection. This plug-and-play device enhances your vehicle's interior with modern functionality.

ANZHLE Central-Mounted Clock Speaker installed in a Land Rover Defender dashboard, showing various display modes and components.

Figure 1: Product Overview and Installed View

2. Safety Information

  • Always turn off your vehicle's ignition and disconnect the battery before performing any electrical installation to prevent short circuits or damage.
  • If you are unsure about any installation steps, seek professional assistance from a qualified automotive technician.
  • Ensure all connections are secure to prevent loose wiring, which can cause intermittent operation or electrical hazards.
  • Do not attempt to modify the product or its wiring, as this may void the warranty and create safety risks.
  • Keep the device away from water and excessive moisture.

3. Package Contents

Please check the package for the following items:

  • ANZHLE Central-Mounted Clock Speaker Unit
  • Power Connector Cable
  • GPS Antenna
  • Instruction Manual (this document)

No additional cables are required for installation; all necessary wiring is included.

4. Setup and Installation

4.1 Pre-Installation Notes

  • The product is designed for easy, plug-and-play installation. However, it requires some hands-on skills and basic automotive knowledge.
  • For best results, professional installation at a car repair shop is recommended.
  • If installing yourself, ensure the car is completely turned off and not powered on throughout the entire installation process until completion.
  • If you are unsure about wire harness insertion points, consult a professional or refer to specific Land Rover Defender L663 disassembly guides.
  • Confirm compatibility: If unsure, send a photo of your original car's center console to customer service for verification.

4.2 Installation Steps

  1. Prepare the Vehicle: Ensure the vehicle is turned off and the ignition is completely disengaged. For added safety, disconnect the negative terminal of the car battery.
  2. Access the Installation Area: Carefully remove the existing central dashboard panel where the new clock speaker unit will be mounted. Refer to your vehicle's service manual or online resources for specific panel removal instructions for the Land Rover Defender L663.
  3. Connect Components:
    • Connect the provided Power Connector to the corresponding port on the new clock speaker unit and then to the vehicle's power harness.
    • Connect the GPS Antenna to its designated port on the unit. Route the GPS antenna cable to a location with a clear view of the sky (e.g., under the dashboard near the windshield) for optimal signal reception.
  4. Mount the Unit: Carefully place the ANZHLE Central-Mounted Clock Speaker unit into the dashboard opening. Ensure it fits securely and aligns correctly with the surrounding trim.
  5. Secure the Panel: Reinstall any removed dashboard trim or panels, ensuring all clips and screws are properly fastened.
  6. Final Check: Reconnect the car battery (if disconnected). Turn on the vehicle's ignition and test the functionality of the new unit.
Before and after installation comparison of the ANZHLE Central-Mounted Clock Speaker in a Land Rover Defender dashboard.

Figure 2: Before and After Installation

Diagram showing the Power Connector and GPS Antenna on the back of the ANZHLE Central-Mounted Clock Speaker unit.

Figure 3: Component Connections (Power Connector and GPS Antenna)

5. Operating Instructions

The ANZHLE Central-Mounted Clock Speaker features a touch-sensitive display for easy navigation between various functions.

5.1 Display Functions and Touch Selection

Once powered on, the unit will display the default screen (usually the clock). To switch between different display modes, simply touch the screen. Each touch will cycle through the available functions:

  • Clock: Displays the current time in analog or digital format.
  • Altitude: Shows the current altitude.
  • Compass: Provides directional information.
  • Pitch: Displays the vehicle's pitch angle.
  • Four Seasons: A decorative display that may change with the season or theme.
  • Vehicle Body Posture: Provides real-time information about the vehicle's orientation and stability.
Various display functions of the ANZHLE Central-Mounted Clock Speaker: Clock, Altitude, Compass, Pitch, Four Seasons, and Vehicle Body Posture.

Figure 4: Available Display Functions

5.2 Product Demonstration Video

Video 1: Product demonstration showing touch interaction and cycling through display modes.

6. Maintenance

  • Cleaning: Use a soft, dry, or slightly damp cloth to clean the display screen and exterior. Do not use abrasive cleaners, solvents, or spray cleaners directly onto the unit.
  • Avoid Impact: Protect the unit from strong impacts or drops, which can damage the internal components or the screen.
  • Temperature: Avoid exposing the unit to extreme temperatures for prolonged periods.

7. Troubleshooting

ProblemPossible CauseSolution
Unit does not power onLoose power connection, vehicle power issueCheck all power connections. Ensure vehicle ignition is on. Verify vehicle's fuse for the relevant circuit.
Display is blank or frozenSoftware glitch, temporary errorTurn off the vehicle, wait a few minutes, then restart. If problem persists, check connections or contact support.
GPS functions (Altitude, Compass) are inaccuratePoor GPS signal, antenna placementEnsure the GPS antenna has a clear view of the sky. Avoid placing it under metal objects. Allow time for GPS to acquire satellites.
Touch screen unresponsiveSoftware issue, screen contaminationClean the screen surface. Restart the vehicle. If unresponsive, contact support.

8. Specifications

FeatureDetail
Placement on VehicleDashboard (Central-Mounted)
Compatible ModelsLand Rover Defender L663 (90/110/130)
FunctionsClock displays, Gyroscope, Car body posture, Altitude, Compass, Pitch
Control MethodTouch Selection
Item Length35 cm
Item Width30 cm
Item Height14 cm
Item Weight1.8 kg (Package Weight: 1.4 kg)
OriginMainland China
Country/Region of ManufactureChina

9. User Tips

  • Professional Installation: While plug-and-play, many users find professional installation beneficial for a seamless setup, especially for dashboard panel removal and wiring.
  • GPS Signal: Ensure the GPS antenna is placed in an optimal location (e.g., under the dashboard near the windshield) for accurate altitude and compass readings.
  • Integrated Design: This unit is designed as an integrated upgrade for the Land Rover Defender L663 and is not intended for standalone use or easy transfer to other vehicles without significant modification. It does not connect to a smartphone.

10. Warranty and Support

10.1 Product Warranty

This ANZHLE product comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by human error, misuse, abuse, unauthorized modification, or improper installation.

  • Within 30 Days: If you encounter issues within 30 days of receipt and installation that cannot be resolved, a free replacement unit may be provided. (Buyer covers shipping to factory, seller covers shipping back to buyer).
  • 2 Months to 1 Year: Free warranty service and replacement parts are provided. Buyer covers shipping costs.
  • Accessories: Accessories are covered by a 3-month warranty (excluding gifts, human damage, or installation errors).
  • Post-Warranty: After the 1-year warranty, repair services are available, with the buyer bearing the repair freight costs.

10.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact ANZHLE customer service. Provide your order number and a detailed description of the issue for prompt support.

While the store aims to be responsive, please allow for potential time differences when awaiting a reply.

© 2024 ANZHLE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.