1. Product Overview
The XINOWY Y20-2X is a motorcycle helmet Bluetooth headset designed for communication and entertainment on the go. It features Bluetooth 5.0 technology, a 1000-meter intercom range, IPX6 waterproofing, an AI voice assistant, and a long-lasting battery.
Figure 1: Y20-2X Headset Overview with Bluetooth 5.0 and 1000M Intercom Distance.
Key Features:
- Bluetooth 5.0: Equipped with a Qualcomm chip for stable connection, low latency, and better sound quality.
- Dual 1000-Meter Intercom: Supports two-person intercom communication (actual distance may vary).
- IPX6 Deep Waterproof: Designed to withstand dust and rain, ensuring reliable performance in various weather conditions.
- AI Voice Assistant: Activate with a short press to control music, navigation, and phone calls.
- Long Range Battery: 1000mAh capacity provides approximately 25 hours of usage.
- Universal Connectivity: Can connect with other Bluetooth earphones for two-way conversations.
- Noise Reduction: Intelligent noise reduction for clear audio.
2. Setup
2.1 Package Contents
Please check the package for the following items:
- 1 or 2 x Y20-2X Host Unit(s)
- 1 or 2 x Speaker Microphone(s) (Soft or Hard, optional)
- 1 or 2 x Clip-on Base(s)
- 1 or 2 x Velcro Installation Package(s)
- 1 or 2 x Type-C Charging Cable(s)
- 1 or 2 x Instruction Manual(s)
Figure 2: Function Key Description and Inventory.
2.2 Charging the Device
Before first use, fully charge the headset.
- Connect the Type-C charging cable to the charging port on the headset and to a DC 5V-1A power charger (maximum output power not exceeding 5W). Do not use fast chargers.
- The charging indicator light will be red during charging.
- The lights will turn off when charging is complete.
- If the device is powered on when connected to the charger, it will automatically shut down to charge.
2.3 Installation
Attach the clip-on base to your helmet. Secure the Y20-2X host unit to the base. Connect the speaker microphone to the host unit.
Important Notice:
After installing the headphones on your helmet, connect your phone and test the sound and volume. If there is a significant difference in sound effect or volume, adjust the position of the speakers inside the helmet for optimal audio.
3. Operating Instructions
3.1 Power On/Off
- To Power On/Off: Press and hold the Power On/Off button for 3 seconds. You will hear a power-on tone and see an LED flash.
- Language Toggle: When Bluetooth is disconnected, double-click the Power On/Off button to switch between Chinese and English voice broadcast.
3.2 Bluetooth Connection
- When the device is powered on and Bluetooth is not connected, the LED lights will flash, indicating it's waiting for pairing.
- On your mobile device, search for