Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Yinuogo Wireless Remote Control Switch Relay Receiver. This versatile device is designed to control various electrical appliances such as garage doors, curtain motors, lights, and other LED signal transmission systems, offering convenient wireless control.
Product Overview
The Yinuogo Wireless Remote Control Switch Relay Receiver operates on a 433MHz frequency and utilizes a learning code method for pairing with remote controls. It supports a wide range of operating voltages, making it suitable for both DC and AC applications.

Specifications
| Feature | Specification |
|---|---|
| Operating Voltage | DC 6-30V / AC 85-250V |
| Frequency | 433MHz / 433.92MHz |
| Encoding Method | Learning Code (1527 RF) |
| Static Working Current | ≤10mA |
| Output Current | ≤10A |
| Operating Temperature | -40℃ to +80℃ |
| Receive Sensitivity | ≥-100dB |
| Working Modes | Jog mode, Self-locking mode, Interlocked mode, Move and lock along the way |
| Output Mode | 6V-30VDC / 85V-265VAC |
Package Contents
Upon opening your package, please ensure all items are present:
- 1x Wireless Remote Control Switch Relay Receiver Module
- 2x 433MHz Remote Controls (CR2016x2 batteries NOT included)


Setup and Installation
Carefully follow the wiring diagrams below based on your application. Ensure power is disconnected before making any connections.
Wiring Diagrams





Operating Instructions
The receiver supports multiple working modes. Follow the steps below to program your remote control.
1. Clear Code Mode
To clear all previously learned remote control key codes:
- Press the code matching button on the control board 8 times in a row.
- Wait for the LED indicator light to automatically flash continuously 4 times and then return to normal. This indicates all codes are cleared.
2. Learning Modes (Pattern Pairing)
After clearing codes, you can program the desired working mode:
Jog Mode (Momentary)
In Jog mode, the output is active only while the remote button is pressed.
- Press the code matching button on the control board once.
- Wait for the LED indicator light to turn off.
- Press the remote control 'A' button. The LED will flash 3 times.
- Press the remote control 'B' button. The LED will flash 3 times and then remain on, indicating successful pairing.
Self-locking Mode (Toggle)
In Self-locking mode, one press turns the output ON, and another press turns it OFF.
- Press the code matching button on the control board twice.
- Wait for the LED indicator light to turn off.
- Press the remote control 'A' button. The LED will flash 3 times.
- Press the remote control 'B' button. The LED will flash 3 times and then remain on, indicating successful pairing.
Interlocked Mode (Latched)
In Interlocked mode, pressing one button turns its corresponding output ON and simultaneously turns OFF any other active output.
- Press the code matching button on the control board three times.
- Wait for the LED indicator light to turn off.
- Press the remote control 'A' button. The LED will flash 3 times.
- Press the remote control 'B' button. The LED will flash 3 times and then remain on, indicating successful pairing.
Move and Lock Along the Way (Delay Mode)
This mode typically involves a delay function, where the output remains active for a set period after the button is released.
- Press the code matching button on the control board four times.
- Wait for the LED indicator light to turn off.
- Press the remote control 'A' button. The LED will flash 3 times.
- Press the remote control 'B' button. The LED will flash 3 times and then remain on, indicating successful pairing.
Demonstration Video
Watch this video for a visual guide on programming the different modes:
Maintenance
- Keep the receiver module and remote controls dry. Moisture can damage internal components.
- Clean the devices with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ensure the remote control batteries (CR2016x2) are replaced when the signal weakens or the remote stops responding.
- Avoid exposing the devices to extreme temperatures.
Troubleshooting
- Remote not responding: Check the remote control battery. If the battery is good, try clearing the code and re-pairing the remote control with the receiver.
- Limited range: Ensure there are no major obstructions between the remote and the receiver. Check for potential sources of radio interference. The receiver's antenna should be positioned optimally.
- Incorrect mode operation: If the device is not operating in the expected mode (e.g., momentary instead of toggle), clear all codes and re-program the desired mode carefully following the instructions.
- LED indicator not lighting up: Verify the power supply to the receiver module. If power is present, the module might be faulty.
User Tips
- This remote control system works perfectly for applications like controlling lifts or hoists.
- Ensure all wiring connections are secure and correctly matched to the load's voltage requirements (DC 6-30V or AC 85-250V) to prevent damage.
- For optimal performance, consider the placement of the receiver to minimize signal interference.
Frequently Asked Questions (FAQ)
- Q: What is the operating frequency of the remote control?
A: The remote control operates at 433MHz / 433.92MHz. - Q: Can I use this receiver with both AC and DC power sources?
A: Yes, the receiver supports a wide operating voltage range of DC 6-30V and AC 85-250V. - Q: How do I reset the remote control pairing?
A: To clear all learned codes, press the code matching button on the receiver board 8 times. - Q: Are the remote controls included with batteries?
A: No, the remote controls require CR2016x2 batteries, which are not included.
Additional Resources
For further detailed information, you may refer to the official user manual PDF: User manual (PDF)