1. Introduction
The SHIDU M800 is an 18W waterproof portable Bluetooth wireless voice amplifier designed for clear and powerful sound projection. It is ideal for teachers, tour guides, public speakers, and for use in various indoor and outdoor settings. This device features a high-capacity lithium battery, supports multiple audio inputs, and includes a versatile wireless microphone headset.
The M800 amplifier boasts a stylish, ergonomic, and comfortable design with high-fidelity magnetic speakers housed in a light, durable, and wear-resistant ABS plastic casing. It incorporates strong anti-jamming technology for simultaneous use of multiple amplifiers and supports TF card and USB flash drive for MP3 audio playback. Additionally, it offers a power bank function for emergency charging.
2. Package Contents
Please check the box for the following items:
- SHIDU M800 Voice Amplifier
- Removable and Adjustable Bluetooth Wireless Microphone Headset
- USB Wall Plug (Charger)
- USB Charging Cable
- 3.5mm Audio Jack Cable
- Adjustable Strap
- Microphone Foam Cover
- User Manual (this document)
3. Product Overview
3.1. Voice Amplifier
The amplifier features a sturdy and rugged design, making it dustproof, shockproof, and IPX5 waterproof (do not submerge). It includes a belt clip for easy portability.
3.2. Wireless Microphone Headset
The wireless microphone headset is designed for comfort and versatility. It can be worn over the head, around the neck, or held in hand. It features volume controls and a Bluetooth pairing button. The headset speaker and microphone are clearly indicated.
4. Setup Guide
4.1. Initial Charging
Before first use, fully charge both the voice amplifier and the wireless microphone headset to ensure optimal performance.
- Voice Amplifier: Connect the USB charging cable to the amplifier's charging port (DC 5V) and to the USB wall plug. The LCD display will show the charging progress. Charging time is approximately 3-5 hours.
- Wireless Microphone Headset: When the microphone's blue indicator light flashes, it indicates low battery. Turn off the microphone and charge it via the Micro USB port using a DC 5V 500mA adapter. The red indicator light will be on during charging and turn off when fully charged. Charging time is approximately 3-5 hours. Unplug the charger as soon as it is fully charged.
4.2. Pairing the Wireless Microphone
The wireless microphone is factory-paired. If re-pairing is needed due to no sound or disconnection:
- Step 1: Turn on the voice amplifier. Long press the "M" (Mode) key for 5 seconds. The amplifier will give a voice prompt: "UHF waiting for connection".
- Step 2: Turn on the wireless microphone. Long press its power key for 5 seconds. Pairing is successful when you hear the voice prompt: "UHF is connected".
5. Operating Instructions
5.1. Basic Controls
- Power Key / Play & Pause: Press for 3 seconds to turn the amplifier ON/OFF. Short press to play or pause music.
- Mode Switch (M): Short press "M" to cycle through working modes: Bluetooth, USB flash drive, TF card, AUX, and UHF (for wireless microphone).
- Previous / Volume Down (⏮): Short press for the previous song. Long press to decrease volume.
- Next / Volume Up (⏭): Short press for the next song. Long press to increase volume.
- Recording (🎤): See section 5.3 for details.
5.2. Media Playback
The amplifier supports various media inputs:
- Bluetooth: Pair with your mobile phone or other Bluetooth devices (see section 5.6).
- TF Card: Insert a TF card (up to 32GB) into the TF card slot. The amplifier will automatically play MP3 audio files.
- USB Flash Drive: Insert a USB flash drive into the USB slot. The amplifier will automatically play MP3 audio files.
- AUX Input: Connect an audio cable (3.5mm audio jack) from your computer, mobile phone, or MP3/MP4 player to the AUX input port on the amplifier. Switch to AUX mode using the "M" key.
Loop Function: When playing music from a TF card or USB flash drive, long press the "M" key for 3 seconds to switch to single song repeat. Long press "M" again for 3 seconds to switch to all repeat. The speaker defaults to "all repeat" after being powered on.
5.3. Recording Function
To record audio:
- Ensure a USB flash drive or TF card is inserted into the amplifier.
- Plug a wired microphone into the "MIC" port.
- Short press the Recording (🎤) key to start recording.
- Short press the Recording (🎤) key again to stop recording. The recording will be saved automatically to the inserted USB flash drive or TF card.
- To play recordings, long press the Recording (🎤) key in MP3 playing mode.
5.4. Power Bank Function
The SHIDU M800 can also function as a mobile power source to charge your phone. Connect your phone's charging cable to the USB slot on the amplifier.
5.5. Wearing the Amplifier
For optimal sound and comfort, use the adjustable strap to wear the amplifier around your waist. Position the headset microphone correctly, ensuring the capsule is aimed towards your mouth.
5.6. Bluetooth Connection
To connect your device via Bluetooth:
- Switch on the amplifier and press the "M" key to enter Bluetooth mode. The amplifier will prompt: "Bluetooth is waiting for connection".
- On your mobile phone or Bluetooth device, turn on Bluetooth and search for "SD-M800".
- Select "SD-M800" to connect. Once connected, the amplifier will prompt: "Bluetooth is connected".
- For a stable signal, keep your device within 10 meters (33 feet) of the amplifier.
6. Maintenance
- Charging: Always charge the device when the battery is low. Unplug the charger once the device is fully charged to prolong battery life.
- Cleaning: Use a soft, dry cloth to clean the amplifier and microphone. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Resistance: The amplifier is IPX5 waterproof, meaning it can resist a sustained, low-pressure water jet spray. Do not submerge the device in water.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Amplifier is on, but no sound. |
|
| Talking into the wireless microphone, but no sound from the amplifier. |
|
| The voice amplifier produces a distinct howling sound. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | M800 |
| Item Type | Wireless Megaphone With Microphone |
| Max Output Power | 18W |
| Power Source | AC&DC |
| Frequency Response | 80Hz-18KHz |
| Output Impedance | 4Ω |
| Working Temperature | -10°C to 45°C |
| Charging Voltage | DC 5V 1A |
| Battery Life (Amplify Time) | 10-12 hours |
| Battery Life (Music Play Time) | 8-10 hours |
| Charging Time | 3-5 hours |
| Battery Included | Yes (High-capacity 3.7V 4400mAh lithium-ion battery) |
| Dimensions (WxHxD) | 120*96*45mm |
| Weight | 392g |
| Material | Metal (housing is ABS plastic) |
| Support MP3 | Yes |
| Voice Record | Yes |
| Waterproof Rating | IPX5 |
| Certification | CE, FCC |
9. User Tips
- For consistently clear and non-robotic sound, ensure the microphone is positioned correctly and fully charged.
- The amplifier's battery offers excellent endurance, often lasting a full day of continuous use and potentially up to two days with intermittent use.
- Despite its compact and lightweight design, the M800 delivers powerful amplification suitable for various environments.
10. Warranty and Support
SHIDU guarantees 100% product satisfaction and offers a 1-year warranty. For any questions or support, please contact SHIDU customer service. Refer to the official SHIDU website or the original packaging for contact details.
For additional guides and documents, you may refer to the official user manual PDF: SHIDU M800 User Manual (PDF)