Lemorele G52R1

Contents

Lemorele Wireless HDMI Transmitter & Receiver Kit

Model: G52R1

1. Introduction

Thank you for choosing the Lemorele Wireless HDMI Transmitter & Receiver Kit. This device allows you to wirelessly transmit high-definition video and audio from your source device to a display, eliminating the need for long cables. It supports 1080P Full HD resolution and offers a stable 2.4G/5G wireless transmission over distances up to 50 meters (165 feet). This manual provides detailed instructions for setup, operation, and maintenance.

Lemorele Wireless HDMI Transmitter and Receiver Kit with key features

Figure 1: Lemorele Wireless HDMI Transmitter and Receiver Kit. Key features include 1080P Full HD, 165FT/50M transmission range, HDMI+VGA output, and Plug & Play functionality.

2. Package Contents

Please check the package contents upon unboxing:

  • 1x Wireless HDMI Receiver (RX)
  • 1x Wireless HDMI Transmitter (TX)
  • 1x USB Power Cable (for Receiver)
  • 1x HDMI Cable
  • 1x User Manual
Package contents and dimensions of the Lemorele Wireless HDMI Kit

Figure 2: Package contents including the Receiver, Transmitter, cables, and user manual. Dimensions are shown for both units.

3. Setup Instructions

Follow these steps to set up your Lemorele Wireless HDMI Kit:

  1. Connect the Receiver (RX) to your Display:
    • Connect one end of an HDMI cable to the HDMI output port on the Receiver.
    • Connect the other end of the HDMI cable to an HDMI input port on your TV, monitor, or projector.
    • Alternatively, if your display uses VGA, connect a VGA cable from the Receiver's VGA port to your display. For audio, connect a 3.5mm audio cable from the Receiver's audio out port to your speaker system.
  2. Power the Receiver (RX):
    • Connect the provided USB power cable to the USB-C power input port on the Receiver.
    • Plug the other end of the USB power cable into a USB power adapter (5V/2A recommended, not included) and then into a power outlet. The Receiver's indicator light will illuminate.
  3. Connect the Transmitter (TX) to your Source Device:
    • Plug the HDMI connector of the Transmitter directly into an HDMI output port on your laptop, PC, game console, or other source device.
    • The Transmitter typically draws power from the HDMI port. If your source device's HDMI port does not provide sufficient power, connect a USB-C power cable (not included) to the Transmitter's USB-C port and to a USB power source.
  4. Power On Devices:
    • Ensure your display and source device are powered on.
  5. Automatic Connection:
    • The Transmitter and Receiver are designed for plug-and-play operation and should automatically pair and establish a connection. The indicator lights on both devices will show a stable state once connected.

Video 1: Product demonstration showing the setup process and one-touch switching functionality.

4. Operating Instructions

4.1 Basic Operation

  • Once connected as per the setup instructions, the video and audio from your source device will be wirelessly transmitted to your display.
  • The system is plug-and-play, requiring no software installation or complex configuration.

4.2 Multiple Transmitters (One-Touch Switching)

The Lemorele Wireless HDMI Kit supports up to 8 transmitters connected to a single receiver, allowing for seamless switching between different source devices.

  1. Connect additional Transmitters (purchased separately) to other source devices.
  2. To switch the displayed source, simply press the button on the Transmitter connected to the device you wish to display. The receiver will automatically switch to that source.
  3. This one-touch switching ensures no interference between connected devices.
Diagram showing up to 8 transmitters connected to one receiver

Figure 3: Illustration of multiple transmitters (up to 8) connected to various laptops, all wirelessly transmitting to a single receiver and display, with one-touch switching capability.

4.3 Transmission Range and Quality

  • The system provides a maximum transmission distance of 50 meters (165 feet) in an open environment. Obstacles like walls and furniture may reduce this range.
  • It utilizes 2.4G/5G dual-band wireless transmission for stable and fast video delivery.
  • Supports 1080P Full HD resolution for clear and crisp visuals.
Classroom scenario demonstrating 2.4G/5G wireless transmission and 165ft/50m range

Figure 4: An example of the wireless transmission in a classroom setting, highlighting the 2.4G/5G wireless transmission and 165FT/50M range with 1080P Full HD quality.

4.4 Compatibility

The kit offers wide compatibility:

  • Transmitter Input (TX): Compatible with devices featuring an HDMI output, including Windows laptops, Mac OS computers, Desktop PCs, game consoles, and more.
  • Receiver Output (RX): Connects to displays with HDMI or VGA input, such as HD TVs, computer monitors, projectors, and can output audio to external speakers.
Compatibility diagram for transmitter and receiver

Figure 5: Diagram illustrating the wide application and compatibility of the system, showing various input sources for the transmitter and output displays for the receiver.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the devices. Do not use liquid cleaners or aerosol sprays.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping or subjecting the devices to strong impacts.
  • Power: Always use the recommended power supply to prevent damage.

6. Troubleshooting

If you encounter issues, please refer to the following common solutions:

ProblemPossible CauseSolution
No signal on displayLoose connections, no power, incorrect input selected on display.Check all HDMI/VGA and power connections. Ensure both TX and RX are powered. Select the correct HDMI/VGA input on your display.
Flickering image or unstable signalToo far from receiver, obstructions, interference.Reduce the distance between TX and RX. Ensure a clear line of sight. Move away from other wireless devices (Wi-Fi routers, microwaves).
No audioAudio cable not connected, source audio settings, display audio settings.If using VGA, ensure the 3.5mm audio cable is connected from RX to speakers. Check audio output settings on your source device and input settings on your display/speakers.
Transmitter not powering onInsufficient power from HDMI port.Connect an external USB-C power source to the Transmitter's USB-C port.

7. Specifications

FeatureSpecification
Model NumberG52R1
BrandLemorele
TypeTransmitter and Receiver Kits
Connector A (Source)HDMI-Compatible
Connector B (Display)VGA, HDMI-Compatible
Max Resolution1080P Full HD
Wireless Frequency2.4G/5G Dual Band
Transmission DistanceUp to 50 meters (165 feet)
Max Transmitters8 (to one receiver)
External Power SourceYes (USB-C for RX, optional for TX)
CertificationsCE, FCC, RoHS
Receiver Dimensions (approx.)14.7cm x 6cm x 2cm (5.70in x 2.36in x 0.78in)
Transmitter Dimensions (approx.)6cm diameter (2.36in), 13.3cm total length (5.2in)
Weight0.47 kg (package weight)

8. User Tips

  • Line of Sight: For optimal performance and maximum range, try to maintain a clear line of sight between the Transmitter and Receiver.
  • Power Supply: Always use a stable 5V/2A power adapter for the Receiver to ensure reliable operation.
  • Interference: Avoid placing the Receiver or Transmitter too close to other strong wireless signal sources like Wi-Fi routers or microwave ovens, as this can cause interference.
  • One-Touch Switching: When using multiple transmitters, a quick press of the button on the desired transmitter is all it takes to switch the display source.

9. Frequently Asked Questions (FAQ)

  • Q: Do I need to install any drivers?
    A: No, the Lemorele Wireless HDMI Kit is plug-and-play and does not require any driver installation.
  • Q: What is the maximum number of transmitters I can use with one receiver?
    A: You can connect up to 8 transmitters to a single receiver.
  • Q: What is the maximum transmission distance?
    A: The maximum transmission distance is 50 meters (165 feet) in an open environment. This distance may be reduced by obstacles.
  • Q: Can I connect my old projector that only has a VGA input?
    A: Yes, the receiver has both HDMI and VGA output ports, allowing you to connect to VGA-only displays. Remember to connect external speakers via the 3.5mm audio jack if using VGA.
  • Q: What resolutions are supported?
    A: The system supports resolutions up to 1080P Full HD.

10. Warranty and Support

Lemorele products come with a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Lemorele website. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.