diymore ZK-PRO2

Contents

ZK-PRO2 Fever Pre Stage Tone Board User Manual

2.1 Channel Subwoofer with High Pass BT Decoding

Introduction

Thank you for choosing the ZK-PRO2 Fever Pre Stage Tone Board. This module is a high-performance 2.1 channel pre-amplifier designed for home theater and audio systems, featuring Bluetooth decoding with QCC3034+ES9023 for high-definition lossless audio. This manual provides essential information for the proper setup, operation, and maintenance of your device.

ZK-PRO2 Tone Board with 2.1-channel output label

Figure 1: ZK-PRO2 Tone Board highlighting 2.1-channel output capability.

Setup

1. Package Contents

  • 1x ZK-PRO2 Front Tone Board
  • 2x 3P Dual Head Audio Cables
  • Knob caps (require self-installation)
ZK-PRO2 Tone Board with included cables

Figure 2: ZK-PRO2 Tone Board with included audio cables.

2. Connections

Refer to the wiring diagram and port labels for correct connections.

ZK-PRO2 Tone Board with labeled ports and controls

Figure 3: ZK-PRO2 Tone Board with detailed port and control labels.

  1. Power Input: Connect a DC 12-26V power supply to the designated power input terminal. Ensure correct polarity. Do not input AC power.
  2. Audio Input:
    • LINE IN: Use a 3.5mm audio cable to connect your audio source (e.g., phone, PC) to the 3.5mm audio female socket.
    • Bluetooth (BT): For wireless audio input, pair your device as described in the Operating section.
  3. Audio Output: The board provides left and right stereo outputs, and two subwoofer outputs (Subwoofer 1, Subwoofer 2) via three XH2.54-3P terminals. These can be connected to pure rear stage amplifiers such as ZK-1602 and ZK-3002.
Wiring diagram showing ZK-PRO2 connected to amplifiers and speakers

Figure 4: Example wiring diagram connecting the ZK-PRO2 to amplifiers and speakers.

3. External Antenna Installation (Special Scenario)

The board is equipped with an onboard antenna, providing a normal Bluetooth range of 10-15 meters. If the board is installed in a metal enclosure (which can block the signal) or if you require an extended Bluetooth distance (20-30 meters), an external 2.4G antenna is necessary.

  1. Purchase a compatible 2.4G antenna, including an antenna extension cable and antenna rod.
  2. Connect the external antenna to the IPEX/IPX generation antenna base, which is already soldered onto the amplifier board.
Diagram showing how to install an external 2.4G antenna to the IPEX/IPX base

Figure 5: Instructions for installing an external 2.4G antenna.

Operating

1. Power On

Once all connections are secure, apply DC 12-26V power to the board. The power indicator (if present) should illuminate.

2. Input Selection

The ZK-PRO2 supports both Bluetooth (BT) and AUX (3.5mm LINE IN) inputs. The board will automatically switch or prioritize inputs based on active connections.

3. Bluetooth Pairing

The board features a QCC3034+ES9023 combination, supporting APTX-HD protocol for high-definition lossless audio transmission up to 15 meters.

  1. Ensure the board is powered on.
  2. On your audio device (smartphone, tablet, etc.), search for Bluetooth devices.
  3. Select the ZK-PRO2 (or similar name) from the list of available devices to pair.
  4. Once paired, audio will be streamed wirelessly to the tone board.
ZK-PRO2 Tone Board highlighting APTX-HD protocol support

Figure 6: ZK-PRO2 Tone Board featuring APTX-HD protocol support for stable wireless audio.

4. Audio Controls

Use the potentiometers on the board to adjust audio parameters:

  • SUB FREQ (Subwoofer Frequency Regulation): Adjusts the subwoofer crossover frequency (20-180Hz).
  • SUB VOL (Subwoofer Volume Adjustment): Controls the output volume of the subwoofer channels.
  • TRE (Treble Adjustment): Adjusts the high-frequency response.
  • BASS (Bass Adjustment): Adjusts the low-frequency response.
  • MAIN VOL (Master Volume Adjustment): Controls the overall output volume of all channels.

5. Optional Button Extension Wiring

For advanced users, external buttons can be wired to control playback functions. Refer to the schematic diagram for connections:

Schematic diagram for button extension wiring

Figure 7: Schematic diagram for connecting optional external control buttons.

  • PLAY/PAUSE: Short press to play/pause. Long press for 3 seconds to disconnect Bluetooth.
  • PREV/VOL-: Short press for previous track. Long press to decrease volume.
  • NEXT/VOL+: Short press for next track. Long press to increase volume.

Maintenance

  • Keep the device in a dry environment and avoid exposure to moisture or liquids.
  • Clean the board gently with a soft, dry cloth. Do not use harsh chemicals or solvents.
  • Avoid operating the device in extreme temperatures or direct sunlight.
  • Ensure proper ventilation around the board if enclosed.

Troubleshooting

  • No Power: Verify that the DC 12-26V power supply is correctly connected and functioning. Check for proper polarity.
  • No Sound Output:
    • Check all audio input and output connections.
    • Ensure the master volume (MAIN VOL) and individual channel volumes (SUB VOL) are not set to minimum.
    • Verify the audio source is playing and its volume is adequate.
    • Confirm that connected amplifiers are powered on and functioning.
  • Bluetooth Connection Issues:
    • Ensure the board is within the 15-meter Bluetooth range.
    • Check for potential interference from other wireless devices.
    • Try disconnecting and re-pairing the Bluetooth device.
    • If using a metal enclosure, consider installing an external antenna.
  • Audio Distortion or Noise:
    • Ensure the input voltage is stable and within the specified DC 12-26V range.
    • Check audio cables for damage or loose connections.
    • The built-in isolated power supply design minimizes interference; however, ensure your power supply is clean and free of excessive ripple.

Specifications

Table of ZK-PRO2 product parameters

Figure 8: Detailed product parameters for the ZK-PRO2 Tone Board.

Parameter Value
Product NameZK-PRO2 Front Tone Board
Input VoltageDC 12-26V (Cannot input AC power)
Working Current28mA
BT Encoding FormatSBC/AAC/APTX/APTX-HD
Input MethodBT+AUX
Audio Input Interface3.5mm audio female socket
BT Distance15 meters
Audio Output InterfaceLeft/Right Stereo, Subwoofer 1, Subwoofer 2 (XH2.54-3P terminals)
Operational Amplifier ChipSix TI original NE5532 chips
Potentiometer50K dual, 6mm plum blossom handle; Spacing 23.5mm
Size120x73x19.6mm
Dynamic Range112dB
Signal-to-Noise Ratio (SNR)112dB
Distortion Level-97dB
Decoding comparison chart for various Bluetooth codecs

Figure 9: Comparison chart of different Bluetooth encoding bandwidths.

User Tips

  • Power Supply: Always use a DC power supply within the 12-26V range. Supplying higher voltages (e.g., 50V) will damage the board.
  • Knob Installation: Ensure the knob caps are securely installed for comfortable adjustment.
  • DIY Gain Adjustment: For experienced users, the gain of the front-end board can be fine-tuned by replacing specific resistors (R9, R53, R62). This should only be attempted by those with necessary technical knowledge and tools. Refer to the diagram for details.
Diagram showing DIY gain adjustment points and resistor values

Figure 10: Instructions for DIY gain adjustment using specific resistors.

Warranty and Support

For any technical support, warranty inquiries, or further assistance, please contact the seller or retailer from whom you purchased this product. Please refer to the official user manual PDF for additional details: User Manual (PDF).

© 2024 diymore module Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.