1. Introduction
Thank you for purchasing the Godox SkyTalk Air Wireless Intercom Headset System. This manual provides detailed instructions for proper operation and optimal performance. Please read it thoroughly before use.
The Godox SkyTalk Air is a full-duplex wireless intercom system designed for clear and efficient communication in professional settings such as film crews, live streaming, weddings, and aerial shoots.

2. Main Features
- Max. Wireless Transmission Sight Distance: Up to 500m.
- Environmental Noise Cancellation (ENC): For clear intercom communication.
- Robust Battery Life: Provides 20 hours of long-lasting battery life.
- Adaptive Expansion System: Enables 2 to 5-user intercom.
- Flexible Grouping: Supports up to 5 users in one call, with customizable master/remote roles and the ability to create two separate groups simultaneously.
- Detachable Lithium Battery: Supports charging via USB-C port or dedicated charging case.
- Lightweight and Comfortable: Weighs only 207g, with a high-elastic headband and soft, detachable full-leather ear cushions for skin-friendly and pressure-free wear.
- Dual-Antenna Design: Built-in FPC antenna offers robust anti-interference performance and pristine audio, ensuring stable communication even in complex environments with walls and fast movement.
- Mute Control Options: Features both a lever mute (rotate boom mic up to mute, pull down to talk) and a button mute (tap to mute, tap again to unmute).
- Easy Volume Control: Smooth, simple, and fast adjustment with a scroll wheel.
- Any Remote as Master: Replace lost, dead, or damaged master headsets with any other remote headset without communication breaks.



3. Product Overview
3.1 Parts Name (Headset)

- Battery Compartment Switch: Slide to open/close battery compartment.
- Volume Adjustment Dial: Rotate up to increase volume, rotate down to decrease volume.
- Pairing Button: Press and hold for 5 seconds to start pairing.
- Microphone Rod: Lift up to turn on mic, lower to turn off mic.
- Mute/PTT Mode Button: For muting or Push-To-Talk functionality.
- Indicator Switch: Status indicator light.
- Label Paste Site: Red label for master headset, yellow label for remote headset.
- External Antenna: For wireless transmission.
- USB-C Port: For charging.
- Power Switch: On/Off switch.
- 3.5mm Earphone Jack: For external earphone monitoring.
3.2 What's in the Box (Package Contents)
The package contents vary slightly depending on the specific SkyTalk Air model (e.g., single headset, 3S, 4S, 5S). Below is a general overview and specific details for the STA-CH08 charging case.

| Item | Description |
|---|---|
| Headset | SkyTalk Air Headset (quantity varies by model) |
| Battery | Lithium Battery (quantity varies by model) |
| Charging Case | STA-CH08 Charging Case (included with multi-headset kits) |
| Charging Cord | USB-C charging cord (1-to-3 for single/3S, USB-C to USB-C for 4S/5S) |
| Microphone Cushion | Foam cover for microphone |
| On-Ear Foam Cushion | Replacement foam ear cushions |
| Over-Ear Foam Cushion | Replacement foam ear cushions |
| Battery Cushion | Cushion for battery compartment |
| Storage Bag/Case | Protective carrying solution (quantity varies by model) |
| Instruction Manual | This document |
| Number Sticker | For identifying headsets |
4. Setup
4.1 Battery Installation
Installation:
- Slide down the battery compartment switch and open the cover.
- Insert the battery into the battery compartment with the contacts facing inwards.
- Close the cover.
Disassembly:
- Slide up the battery compartment switch and open the cover.
- Take out the battery.

4.2 Pairing Headsets
The headsets are pre-paired from the factory. Pairing is only required when connecting a new headset to an existing system. Ensure all headsets in the system are powered on and connected before proceeding.
- Set Master/Remote Mode: Designate one headset as the master headset and the others (1-4 headsets) as remote headsets.
- Initiate Pairing: Press and hold the pairing buttons of all headsets for 5 seconds. A voice announcement "to be connected" indicates successful connection.
- Confirm Role: After pairing, press the pairing button of a specific headset. A voice announcement will indicate if it's a master or remote headset.
- Reboot: Reboot all headsets for them to be ready for use.
Note: One master headset can connect to a maximum of four remote headsets.

5. Operating Instructions
5.1 Microphone Usage (Turn On/Off)
The microphone can be worn on either the left or right side and can be adjusted up and down by 270 degrees.
- To Turn On/Pick Up Sound: Lower the microphone rod. A voice announcement "Microphone on" will confirm it's active.
- To Monitor Only (No Pick Up): Lift the microphone rod up to a 90-degree range. You can monitor audio, but your voice will not be transmitted. A voice announcement "Microphone off" will confirm.

5.2 Mute / PTT Modes (Mic On Status)
When the microphone is active, you have two mute control options:
- Lever Mute: Rotate the boom mic up to mute. Pull it down to talk.
- Button Mute: Tap the PTT button to mute, tap again to unmute.
- PTT Mode: Long press the PTT button to talk; release to mute.

5.3 Volume Adjustment
Use the volume adjustment dial (scroll wheel) on the headset:
- Rotate up: To increase volume.
- Rotate down: To decrease volume.
5.4 Searching for Headsets
To quickly identify headsets within the same group:
- Quickly press the pairing button twice.
- All headset indicators will flash red and green quickly and alternately for 15 seconds.
5.5 External Earphone Monitoring
The 3.5mm earphone jack allows you to connect an external earphone to monitor the intercom communication.

6. Maintenance
6.1 Battery Charging Case (STA-CH08)
The STA-CH08 charging case is designed to charge multiple lithium batteries simultaneously. It features 8 indicators, each corresponding to a charging slot.


Indicator Light Description (Charging Case):
- Charging Case Powered On, Battery Inserted: The corresponding indicator light will illuminate.
- Battery Removed: The indicator light will turn off.
Battery Status Indicators (when charging case is powered on):
- Green flashing: Charging.
- Green constant on: Fully charged.
- Red fast flash for 10s: Low temperature protection.
Battery Level Indicators (when charging case is off, press test button):
- Red constant on: Battery level 0%~40%.
- Yellow constant on: Battery level 40%~80%.
- Green constant on: Battery level 80%~100%.
6.2 General Care
- Always keep the product dry. Do not use in rain or damp conditions.
- Do not leave or store this product in direct sunlight, near heating devices, or in hot, humid, or dusty environments.
- Do not leave or store the product if the ambient temperature exceeds 60°C.
- Clean the ear cushions and microphone foam regularly with a soft, dry cloth.
7. Troubleshooting
- No Communication: Ensure all headsets are powered on and within the 500m transmission range. Check battery levels. If a new headset was added, ensure it was properly paired.
- Poor Audio Quality / Noise: Verify the microphone rod is correctly positioned. Ensure the ENC (Environmental Noise Cancellation) is active. Move away from strong interference sources.
- Headset Not Turning On: Check battery installation and charge level. Ensure the power switch is in the 'ON' position.
- Charging Issues: Ensure the USB-C cable or charging case is properly connected. Check the charging indicators on the headset or charging case.
- Intermittent Connection: Ensure no physical obstructions are blocking the signal. Check for other 2.4GHz devices that might cause interference.
- Microphone Not Picking Up Sound: Ensure the microphone rod is lowered (mic on status). Check if the headset is in mute mode (lever or button mute).
8. User Tips
- The Godox SkyTalk Air system is generally reliable and performs well in various event settings.
- While the system features Environmental Noise Cancellation, its effectiveness may be limited in extremely noisy production environments. For optimal clarity, consider using it in moderately quiet settings or supplementing with additional noise reduction techniques if possible.
- The full-duplex communication allows for simultaneous talking and listening, which is highly beneficial for online streaming and live production scenarios.
9. Specifications
| Parameter | Headset (SkyTalk Air) | Charging Case (STA-CH08) |
|---|---|---|
| Wireless Band | 2.4GHz | / |
| Max. Transmission Distance | 500m | / |
| Frequency Response | 150Hz-7KHz | / |
| Signal to Noise Ratio | ≥ 71dB @94dBSPL, 1KHz | / |
| Max. SPL | > 115dBSPL | / |
| Lithium Battery Parameters | DC3.8V, 760mAh, 2.888Wh | / |
| USB-C Input | 5V ⎓ 0.6A | 5V ⎓ 2A, 9V ⎓ 2A |
| USB-C Output | / | 4.35V ⎓ 0.2A |
| Charging Time (USB-C Charging) | Approx. 2h | / |
| Battery Life | Approx. 20h | / |
| Adjustable Head Circumference Range | Approx. 54-58cm | / |
| Working Environment Temperature | 0°C~40°C | 0°C~40°C |
| Net Weight (With Battery) | Approx. 207g | Approx. 156g |
Specifications and data may be subject to changes without notice.

10. Safety and Regulatory Information
10.1 Warnings
- This product is a high-precision instrument; avoid falling, collision, or pounding.
- Keep out of reach of children.
- Do not disassemble. Repairs should only be performed by Godox or an authorized maintenance center.
- Always keep this product dry. Do not use in rain or damp conditions.
- Do not leave or store this product in direct sunlight, near heating devices, or in hot, humid, or dusty environments.
- Do not leave or store the product if the ambient temperature exceeds 60°C.
- Do not use in flammable and explosive environments. Pay attention to relevant warning signs.
- Read carefully and follow the warnings or instructions provided by the manufacturer.
- Keep small batteries that could be swallowed by children out of their reach.
- Never swallow batteries, as swallowing may cause burns. If swallowed accidentally, seek medical attention immediately.
10.2 FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
10.3 IC Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
11. Warranty and Support
This warranty card is an important certificate for maintenance service. Please fill in the form in coordination with the seller and keep it safe.
11.1 Applicable Products
The warranty applies to products listed in the Product Maintenance Information. Other products or accessories (e.g., promotional items, giveaways, and additional accessories attached) are not included in this warranty scope.
11.2 Warranty Period
The warranty period for products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the purchase date, which is considered the date registered on the warranty card.
| Product Type | Item Name | Warranty Period (Months) | Warranty Service Type |
|---|---|---|---|
| Parts | Headset Main Body | 12 | Customer sends the product to designated site |
| Battery | 3 | ||
| Charger, Electrical Parts etc. | 12 | ||
| Other Items | Power Cable, Sync Cable, Battery Case, Windscreen Foam, Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc. | No | Without warranty |
11.3 Inapplicable Cases
The warranty and service are not applicable in the following cases:
- The product or accessory has exceeded its warranty period.
- Breakage or damage caused by inappropriate usage, maintenance, or preservation (e.g., improper packing, usage, external equipment connection, falling off, squeezing, exposure to improper temperature, solvent, acid, base, flooding, damp environments).
- Breakage or damage caused by non-authorized installation, maintenance, alteration, addition, or detachment.
- The original identifying information of the product or accessory is modified, altered, or removed.
- No valid warranty card.
- Breakage or damage caused by using illegally authorized, non-standard, or non-publicly released software.
- Breakage or damage caused by force majeure or accident.
- Breakage or damage that cannot be attributed to the product itself.
Normal discoloration, abrasion, and consumption during product use are not considered breakage within the maintenance scope.
11.4 How to Get Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call at 0755-29609320-8062. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, service may still be offered if the product is confirmed to be within the maintenance scope, but this is not an obligation.
For more information on the EU Declaration of Conformity, please visit: https://www.godox.com/eu-declaration-of-conformity/