1. Introduction
Thank you for choosing the CAOWTAN Silicone Watch Strap. This manual provides essential information for the proper installation, use, and maintenance of your new watch strap. Please read it carefully to ensure optimal performance and longevity of your product.

Figure 1: CAOWTAN Silicone Watch Straps with Dandelion Design
2. Setup: Strap Replacement and Adjustment
This section details the process of replacing and adjusting your watch strap.
2.1. Tools Required
- Screwdriver (if applicable for your watch model)
- Spring bar tool
- Lint-free cloth
2.2. Replacement Procedure
- Gently push the buckle to unlock and fully open the strap for subsequent operations.
- Handle the strap with care throughout the process to avoid damaging the lugs and spring bars by prying forcefully.
- Secure the new strap to the watch case with the tools.
- After confirming the strap is properly installed and not loose, wipe the watch and strap with the lint-free cloth to complete the process.

Figure 2: Strap Replacement and Adjustment Guide
3. Operating: Correct Wearing Method
Proper wearing ensures comfort and accurate sensor readings from your smartwatch.
3.1. Wearing Position
Wear the watch above the wrist bone on the side close to the elbow. Ensure the case back is in full and tight contact with the skin, and avoid placing it directly over the center of the wrist bone.
3.2. Regular Tightness
The strap should fit the wrist comfortably with a slight gap for skin ventilation. Avoid excessive tightness that leaves marks or excessive looseness that impairs sensor accuracy.
3.3. Fit Test
Shake your wrist. If the watch case back detaches from the skin, tighten the strap accordingly.
3.4. Adjustment for Exercise
Tighten the strap moderately during exercise to improve accuracy. Loosen it promptly after exercise to restore comfort.

Figure 3: Example of Correct Wearing
4. Maintenance
Proper care will extend the life and appearance of your silicone watch strap.
4.1. Cleaning and Storage
- Wipe with a soft damp cloth regularly.
- Air-dry in a well-ventilated place.
- Avoid direct sunlight exposure.
- Keep away from harsh chemicals.
- Replace the strap promptly if it becomes worn or deformed.
5. Troubleshooting
Address common issues you might encounter with your watch strap.
5.1. Material Sensitivity
Wear the watch for a short test period when using it for the first time. Stop using it immediately if discomfort occurs, clean the skin, and seek medical advice if necessary.
5.2. Safety Check
Inspect the strap fasteners and connections before each wear. Stop using the watch immediately and have it repaired or replaced if any part is loose or malfunctioning.
6. Specifications
| Feature | Detail |
|---|---|
| Material | Silicone |
| Compatibility | Android (For Redmi Watch 4/5/6, For Xiaomi Mi Band 9 Pro/8 Pro) |
| Application Age Group | Adult |
| Type | Watch Strap |
| Brand Name | CAOWTAN |
| Origin | Mainland China |
| Electric | No |
| High-concerned chemical | None |
| Package Dimensions (L x W x H) | 18 cm x 13 cm x 1 cm |
| Package Weight | 0.029 kg |

Figure 4: Engraved Silicone Watch Band Features
7. User Tips
- The strap's closure system is designed so the end goes inside the strap, preventing it from getting caught on clothing or objects.
- For printed silicone straps, regular cleaning with soap and a soft brush is recommended to maintain appearance.
- If the strap width is slightly narrower than your watch's lug width, you may be able to use the pins from your original watch strap for a secure fit.
8. Warranty and Support
For specific warranty details, return policies, or further technical support, please refer to the seller's information or contact their customer service directly.
For additional detailed instructions and diagrams, you may consult the official user manual PDF provided by the seller: View User Manual (PDF)