HORACO ZX-8125Bx1-1T

Contents

HORACO 2.5G PCI-E Network Card User Manual

Model: ZX-8125Bx1-1T

1. Introduction

The HORACO 2.5G PCI-E Network Card (Model: ZX-8125Bx1-1T) is a high-performance network adapter designed to provide ultra-fast wired network connectivity for your desktop computer or server. Featuring the Realtek RTL8125B chip, this card supports 10/100/1000/2500Mbps Ethernet speeds, offering stable and reliable connections for demanding applications like online gaming, 4K video streaming, and large file transfers. It is compatible with various PCI Express slots and operating systems, making it a versatile upgrade for your network infrastructure.

HORACO 2.5G PCI-E Network Card with RTL8125B Chip
Figure 1: HORACO 2.5G PCI-E Network Card Overview

2. Package Contents

Please check the package contents carefully. If any item is missing or damaged, please contact customer support.

  • 1 x HORACO 2.5G PCI Express RTL8125B Network Adapter
  • 1 x User's Manual (this document)
  • 1 x Driver CD
  • 1 x Low Profile Bracket (8cm)
  • Additional Accessories (if included)

3. Specifications

FeatureDescription
Model NameZX-8125Bx1-1T
ChipsetRealtek RTL8125B
Interface TypePCI Express x1 (Compatible with x1, x4, x8, x16 slots)
Transmission Rate2500Mbps (2.5Gbps)
Network StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3bz
Ethernet Speeds10/100/1000/2500Mbps (Auto-Negotiation)
Adapter SocketRJ45
Applicable Network TypeGigabit Ethernet, 2.5G Ethernet
Cable CompatibilityCAT5e, CAT6, CAT6a for 2.5G speeds
FeaturesAuto-Negotiation, Crossover Detection & Auto-Correction, Wake-On-LAN, VLAN Tagging (IEEE 802.1Q), Jumbo Frame (up to 16K bytes), Full Duplex Flow Control (IEEE 802.3x), Hardware ECC/CRC
Dimensions (approx.)72mm (L) x 56mm (W) (card only)
CertificationCE, RoHS
2.5G High-Speed Transmission and Card Dimensions
Figure 2: Transmission Speeds and Card Dimensions
RJ45 Network Port and Cable Compatibility
Figure 3: RJ45 Port and Compatible Cable Types for 2.5G

4. System Requirements

  • An available PCI Express x1, x4, x8, or x16 slot on your motherboard.
  • Supported Operating Systems:
    • Windows 11 / 10 / 8.1 / 8 / 7
    • Windows Server (2008 / 2012)
    • Linux
PCIe Slot Compatibility
Figure 4: Compatible PCI Express Slot Types
Supported Operating Systems
Figure 5: Operating System Compatibility

5. Setup and Installation

5.1. Hardware Installation

  1. Power Off: Turn off your computer completely and unplug the power cord from the wall outlet.
  2. Open Case: Remove the side panel of your computer case to access the motherboard.
  3. Locate Slot: Find an available PCI Express slot (x1, x4, x8, or x16). Remove the metal bracket cover from the chosen slot on the back of your PC case.
  4. Install Bracket (if needed): The network card comes with a standard (12cm) bracket. If you have a low-profile case (e.g., 2U server), replace the standard bracket with the included low-profile (8cm) bracket.
  5. Insert Card: Carefully align the network card's gold-plated connector with the PCI Express slot. Press down firmly and evenly until the card is fully seated in the slot.
  6. Secure Card: Secure the network card to the PC case with a screw or the case's locking mechanism.
  7. Close Case: Replace the computer's side panel and reconnect the power cord.
  8. Power On: Turn on your computer.
Long and Short Bracket Installation Examples
Figure 6: Bracket Options for Different Computer Cases

5.2. Driver Installation

After hardware installation, you will need to install the appropriate drivers for your operating system. Drivers are typically provided on the included CD or can be downloaded from the manufacturer's website.

  1. Insert Driver CD: Insert the provided driver CD into your computer's CD-ROM drive.
  2. Locate Driver: Open the CD-ROM drive in File Explorer/My Computer. Navigate to the folder corresponding to your operating system (e.g., RTL8125\Windows\Win11 for Windows 11).
  3. Run Installer: Double-click the setup.exe or Install_PCIE_WinXX_XXXX.exe file to start the driver installation wizard.
  4. Follow Prompts: Follow the on-screen instructions to complete the driver installation. This usually involves accepting the license agreement and clicking 'Next' or 'Install'.
  5. Restart (if prompted): If prompted, restart your computer to finalize the driver installation.

Your network card should now be recognized by the system and ready for use.

6. Operating the Network Card

Once the HORACO 2.5G PCI-E Network Card is physically installed and its drivers are successfully loaded, it operates automatically. The card will provide a wired network connection through its RJ45 port. Simply connect an Ethernet cable from your router or network switch to the RJ45 port on the network card. Your operating system should automatically detect the network connection and assign an IP address (if DHCP is enabled on your network).

You can verify the network connection status through your operating system's network settings (e.g., Network and Sharing Center in Windows, Network Preferences in Linux).

7. Maintenance

The HORACO 2.5G PCI-E Network Card requires minimal maintenance. To ensure optimal performance and longevity:

  • Keep Clean: Periodically clean the inside of your computer case to prevent dust buildup on the network card and other components. Dust can impede heat dissipation and affect performance.
  • Ensure Ventilation: Make sure your computer case has adequate airflow to prevent overheating, which can affect all internal components, including the network card.
  • Driver Updates: Occasionally check the manufacturer's website for updated drivers. Newer drivers can offer improved performance, stability, or compatibility.

8. Troubleshooting

If you encounter issues with your network card, try the following troubleshooting steps:

8.1. No Network Connection

  • Check Physical Connection: Ensure the Ethernet cable is securely plugged into both the network card's RJ45 port and your router/switch. Check for any damage to the cable.
  • Verify Card Seating: Power off your PC, open the case, and ensure the network card is fully seated in its PCIe slot.
  • Driver Installation: Confirm that the correct drivers are installed. Check Device Manager (Windows) for any yellow exclamation marks next to the network adapter. Reinstall drivers if necessary.
  • Router/Modem: Ensure your router and modem are powered on and functioning correctly. Try restarting them.
  • BIOS Settings: In rare cases, ensure the PCIe slot is enabled in your computer's BIOS/UEFI settings.

8.2. Slow Network Speeds

  • Cable Type: For 2.5Gbps speeds, ensure you are using a CAT5e, CAT6, or CAT6a Ethernet cable. Older CAT5 cables may limit speed.
  • Network Infrastructure: Verify that your router/switch and other network devices support 2.5Gbps or at least Gigabit Ethernet. If any device in the chain is slower, it will bottleneck the speed.
  • Driver Updates: Ensure you have the latest drivers installed for the network card.
  • Network Congestion: Check if other devices on your network are consuming significant bandwidth.

8.3. Device Not Recognized

  • Re-seat Card: Power off your PC and re-seat the network card firmly in its PCIe slot. Try a different PCIe slot if available.
  • Check Device Manager: In Windows Device Manager, check under 'Network adapters' for the card. If it's not listed or has an error, try reinstalling drivers.
  • BIOS/UEFI: Ensure the PCIe slot is enabled in your system's BIOS/UEFI settings.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at the time of manual creation.

10. Support and Contact

For technical support, warranty information, or further inquiries, please contact the manufacturer:

  • Company: Shenzhen Hongyavision Technology co.,Ltd.
  • Tech Support Email: Sodola-Networking@outlook.com
  • Address: 321,3/E, Biaofan Technology Building, No. 6, Tangwei Industrial Avenue, Bao'an District, Shenzhen, 518133, China.

Please refer to the official website or contact support for the most up-to-date information regarding drivers, FAQs, and warranty policies.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.