Fosi Audio D2

Contents

Fosi Audio D2 USB DAC Headphone Amplifier

Model: D2

1. Introduction

Thank you for choosing the Fosi Audio D2 USB DAC Headphone Amplifier. This compact and portable device is designed to enhance your audio experience by providing high-quality digital-to-analog conversion and headphone amplification. The D2 connects via USB-C and outputs to a standard 3.5mm jack, supporting high-resolution audio and microphone input for compatible headsets.

Fosi Audio D2 USB DAC Headphone Amplifier

Figure 1: Fosi Audio D2 USB DAC Headphone Amplifier

2. Package Contents

Please check the package for the following items:

  • Fosi Audio D2 USB DAC Headphone Amplifier

Note: Additional accessories like USB-C to USB-A adapters or Lightning to USB-C OTG cables may need to be purchased separately depending on your source device.

3. Specifications

The Fosi Audio D2 offers robust performance in a compact design:

Fosi Audio D2 Specifications Diagram

Figure 2: D2 Specifications and Dimensions

FeatureDetail
ModelD2
InputUSB-C
Output3.5mm Single-Ended
Cable MaterialOxygen-Free Copper (OFC)
THD+N-95dB
Signal-to-Noise Ratio (SNR)100dB
Dynamic Range105dB
Max Sampling RatePCM 32bit/384kHz
Output Power31mW@32Ω
Body MaterialAluminum Alloy
Dimensions (L x W x H)9.5cm (3.74in) x 1.1cm (0.43in) x 0.9cm (0.35in)

4. Setup Guide

The Fosi Audio D2 is designed for simple plug-and-play operation.

  1. Connect to Audio Source: Plug the USB-C connector of the D2 into your smartphone, tablet, or computer's USB-C port.
  2. Connect Headphones: Plug your 3.5mm headphones or headset into the 3.5mm output jack of the D2.
  3. Device Recognition: Your device should automatically recognize the Fosi Audio D2 as an audio output device. If prompted, select it from your audio settings.
  4. Volume Control: Adjust the volume directly from your connected source device.
Fosi Audio D2 Plug and Play Setup

Figure 3: Plug and Play connection with a smartphone

5. Operating Instructions

The D2 operates as a pass-through audio device, with most controls managed by your source device.

  • Audio Playback: Once connected, simply play audio from your source device. The sound will be routed through the D2 to your connected headphones.
  • Volume Adjustment: All volume adjustments are made directly on your smartphone, tablet, or computer.
  • Microphone Input: The D2 supports high-resolution microphone input (up to 24bit/96kHz) for headsets that include a built-in microphone and in-line remote controls. This is ideal for voice calls and karaoke.
Fosi Audio D2 High-Res Microphone Input

Figure 4: High-Res Microphone Input support

Note: Microphone input and in-line controls require a headset with a built-in microphone and in-line remote.

6. Maintenance

To ensure the longevity and optimal performance of your Fosi Audio D2:

  • Keep the device clean and dry. Use a soft, dry cloth to wipe it down.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or modify the device, as this will void the warranty.
  • Handle the cable gently to prevent damage to the connectors or wiring.

7. Troubleshooting (FAQ)

Q: The D2 is not recognized by my device.
A: Ensure the USB-C connection is secure. Try connecting to a different USB-C port or another device to rule out port issues. Some Android devices may require OTG functionality to be enabled in their settings.
Q: I hear no sound or the sound is distorted.
A: Check that your headphones are fully plugged into the D2. Ensure the volume on your source device is turned up and not muted. Test with different headphones or a different audio source. For iPhones, high volume levels might occasionally cause audio dropouts due to power output limitations.
Q: My phone displays an "Unverified Type-C Digital Headset" message.
A: This is a common message on some Android phones and can usually be safely ignored. The D2 should still function normally.
Q: Can I use the D2 for phone calls?
A: Yes, if you use a headset with a built-in microphone, the D2 supports microphone input for calls and voice communication.
Q: The sound quality is not as expected.
A: Ensure you are using high-quality audio files. The D2 enhances the signal, but the source quality is crucial. Some users report improved clarity and reduced background noise compared to direct device outputs.

8. User Tips

  • iPhone Volume Control: The D2 can provide better volume adjustment granularity when used with iPhones, preventing the lowest volume steps from being too loud.
  • Power for Demanding Headphones: Users have found the D2 provides sufficient power to drive headphones like the Hifiman Sundara, offering a noticeable improvement.
  • Noise Reduction: The D2 effectively resolves background noise often experienced when using a laptop's direct 3.5mm output or Bluetooth connections.
  • Soundstage Enhancement: Connecting the D2 can help open up the soundstage and clarify instrumentation, making small peripheral sounds more distinct.

9. Warranty & Support

Fosi Audio products are known for their quality and reliability. Fosi Audio pledges a 24-month limited warranty from the date of purchase.

If you encounter any problems while using your Fosi Audio D2, please contact our support team for assistance:

Please have your purchase details ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.