Introduction
Thank you for choosing the Teyun X120/X100 Digital Audio Power Amplifier. This manual provides essential information for the safe and efficient operation of your amplifier. Please read this instruction manual carefully before using the product and keep it for future reference.
The Teyun X120/X100 is a professional power amplifier designed for various audio applications, including home theater, karaoke, church sound systems, and wedding shows. It features a robust design with intelligent protection mechanisms to ensure reliable performance.
Safety Information
Please observe the following safety precautions to prevent electric shock, fire, or damage to the unit:
- Do not hang the power cord on sharp objects, and do not connect it to movable objects.
- Do not use this product on a sloping or unstable surface.
- Do not use inferior power strips, as this may cause fire and personal injury.
- It is forbidden to place the product too close to heat sources (e.g., stoves) to avoid damage or fire.
- If the plug or other parts are damaged, stop using the product immediately and contact a qualified professional for repair or replacement.
- Before disassembling or debugging any part of the product, ensure the product is powered off and unplugged.
- If the power cord is damaged, it must be replaced by professionals from the manufacturer or authorized service department.
- Do not use accessories or attachments other than those specified for this product to avoid fire and personal injury. Do not operate this product unattended.
- Before use, confirm that the voltage matches the product specifications (AC100-240V) to avoid safety hazards.
- Do not touch wet objects at the power supply of the device; this may cause a short circuit.
- When carrying or moving the unit, always stop the equipment and pull out the power plug.
- Do not pinch, bend, or twist the power cord excessively, as the core may be exposed or broken. Use only appropriate power sockets.
- If the product exhibits abnormal sound, odor, high temperature, or other unusual conditions during use, stop using it immediately and contact support.
- Avoid exposing the device to direct sunlight or high temperatures, which can cause overheating and reduce its service life. Avoid impacts to prevent dents or affecting normal use.
Product Overview
Front Panel
The front panel provides controls and indicators for easy operation:

Front Panel Diagram showing Power Switch, Signal Lights, and Volume Controls for CH1 and CH2.
- Indicators: Includes three types of lights:
- ON: Power indicator, illuminates when the power switch is turned on.
- SIG: Signal indicator, displays sound signals for left and right channels. Flashes when a sound signal is input.
- CLIP: Limiting indicator, illuminates when the input signal current is too large or overloaded.
- CH1 Volume Control: Adjusts the volume for Channel 1. Turn counter-clockwise to decrease, clockwise to increase.
- CH2 Volume Control: Adjusts the volume for Channel 2. Turn counter-clockwise to decrease, clockwise to increase.
- Power Switch: Turns the amplifier on and off.
Rear Panel
The rear panel provides all necessary connections for power, audio input, and speaker output:

Rear Panel Diagram showing AC Inlet, Cooling Vent, XLR Inputs, XLR Outputs, and Ohm Outputs for CH1 and CH2.
- AC Inlet: 8-shaped power socket for connecting the power cord.
- Cooling Vent: Ensures proper heat dissipation.
- CH1 XLR Input: Balanced XLR input for Channel 1.
- CH2 XLR Input: Balanced XLR input for Channel 2.
- CH1 XLR Output: XLR output for Channel 1.
- CH2 XLR Output: XLR output for Channel 2.
- CH1 Ohm Output: Speaker output for Channel 1, typically using Speakon connectors.
- CH2 Ohm Output: Speaker output for Channel 2, typically using Speakon connectors.
Setup
Follow these steps to properly set up your Teyun amplifier:
1. Power Connection
- Ensure the amplifier's power switch is in the OFF position.
- Connect the provided 8-shaped power cord to the AC Inlet on the rear panel of the amplifier.
- Plug the other end of the power cord into a standard household power socket (AC 100-240V, 50-60Hz).
2. Audio Input Connections
- Connect your audio source (e.g., mixer, pre-amplifier) to the CH1 XLR Input and CH2 XLR Input on the rear panel using balanced XLR cables.
3. Speaker Output Connections
The amplifier uses Speakon connectors for speaker outputs. Ensure your speakers are compatible and use appropriate Speakon cables.

This diagram illustrates various connection types, including Speakon and XLR, for connecting the amplifier to speakers and other audio equipment.
- For Channel 1, connect a professional speaker cable with a Speakon connector (branch +1, -1) to the CH1 Ohm Output on the amplifier's rear panel. Connect the other end to your speaker.
- For Channel 2, connect a professional speaker cable with a Speakon connector (branch +1, -1) to the CH2 Ohm Output on the amplifier's rear panel. Connect the other end to your speaker.
- Ensure speaker impedance is between 4-8Ω.
Speakon NL4FC Plug Wiring
When using Speakon NL4FC connectors, ensure correct wiring for stereo or parallel operation:
| Pin | Function (Stereo/Parallel) |
|---|---|
| 1+ | OUT2+ |
| 1- | OUT2- |
| 2+ | CH1+ |
| 2- | CH1- |
Female 3-Pin Connector Wiring (for XLR)
| Pin | Function |
|---|---|
| 1 | GROUND (shield) |
| 2 | HOT (+) |
| 3 | COLD (-) |
Operation
Once all connections are securely made, you can begin operating your amplifier:
Power On/Off Sequence
- Power On: Always turn on your audio source devices (e.g., mixer, pre-amplifier) first, then turn on the Teyun amplifier.
- Power Off: Always turn off the Teyun amplifier first, then turn off your audio source devices.
Adjusting Volume
- Use the CH1 Volume Control to adjust the output level for Channel 1.
- Use the CH2 Volume Control to adjust the output level for Channel 2.
- Turn the knobs clockwise to increase volume and counter-clockwise to decrease volume.
Monitoring Indicators
- ON Light: Confirms the unit is powered on.
- SIG Light: Flashes to indicate the presence of an audio signal.
- CLIP Light: If this light illuminates, it indicates that the input signal is too strong, potentially causing distortion. Reduce the input level from your source or the amplifier's volume controls to prevent clipping.
Specifications
The following table details the technical specifications for the Teyun X120/X100 Digital Audio Power Amplifier:

Product parameters table for Teyun X120/X100 Digital Audio Power Amplifier.
| Parameter | Specification |
|---|---|
| Sensitivity | 0.775V |
| Audio Input Impedance | 20KΩ (Balanced) 10KΩ (Unbalanced) |
| Frequency Response | 20Hz-20kHz (±0.5dB) |
| Conversion Rate | ≥30V/us |
| Damping Coefficient | ≥800 |
| Crosstalk | > 60dB/1KHz |
| Signal-to-Noise Ratio (S/N) | > 100dB |
| THD+N | < 0.01% 8Ω |
| IMD | < 0.03% 8Ω |
| Power | X100: 8Ω 150W*2 X120: 8Ω 300W*2 |
Note: Due to continuous product improvement, specifications may change without prior notice.
Troubleshooting
If you encounter any issues with your Teyun amplifier, refer to the following common problems and solutions:
- No Power:
- Check if the power cord is securely connected to both the amplifier and the power outlet.
- Ensure the power switch on the front panel is in the ON position.
- Verify that the power outlet is functional.
- No Sound Output:
- Check all audio input and speaker output connections for proper seating and wiring.
- Ensure the volume controls (CH1 and CH2) on the front panel are not set to minimum.
- Verify that your audio source is playing and its output level is sufficient.
- Check the SIG indicators; if they are not flashing, there might be an issue with the audio input signal.
- Distorted Sound (CLIP light on):
- If the CLIP indicator light is on, the input signal is too strong. Reduce the volume from your audio source or the amplifier's volume controls until the CLIP light turns off.
- Ensure your speakers' impedance matches the amplifier's requirements (4-8Ω).
- Abnormal Noise/Odor/Overheating:
- Immediately turn off the amplifier and disconnect it from the power supply.
- Do not attempt to repair it yourself. Contact qualified service personnel.
- Ensure adequate ventilation around the amplifier; do not block the cooling vents.
For issues not covered here, please consult the manufacturer's support resources or a qualified audio technician.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your amplifier:
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or abrasive materials.
- Ventilation: Ensure the cooling vents on the rear panel are free from dust and obstructions. Good airflow is crucial for preventing overheating.
- Cable Care: Regularly inspect all power and audio cables for any signs of wear, damage, or kinks. Replace damaged cables immediately to prevent safety hazards and performance issues.
- Storage: If storing the amplifier for an extended period, disconnect it from power and store it in a cool, dry place away from direct sunlight and extreme temperatures.
User Tips
While no specific user reviews or Q&A were provided, here are some general tips for optimizing your experience with the Teyun X120/X100 amplifier:
- Cable Quality: Invest in high-quality balanced XLR cables for inputs and robust Speakon cables for outputs to minimize signal loss and interference.
- Gain Staging: Properly set the gain levels on your audio source and the amplifier's volume controls to achieve a strong signal without clipping (avoid the CLIP light illuminating frequently).
- Ventilation: Always ensure the amplifier has ample space around it for proper airflow, especially around the rear cooling vent, to prevent overheating during extended use.
- Speaker Matching: Ensure your speakers' power handling capabilities and impedance (4-8Ω) are well-matched to the amplifier's output to prevent damage and achieve optimal sound quality.
- Grounding: If you experience hum or noise, check your grounding connections and ensure all equipment in your audio chain is properly grounded.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Keep your purchase receipt as proof of purchase.
A user manual in PDF format is available for download. You can access it via the following link: Teyun X120/X100 User Manual (PDF)