1. Foreword
Thank you for purchasing our 6-inch Full HD monitor. Please read this manual carefully before using the unit. Have a great experience!
2. Safety Information and Cautions
- Please avoid heavy impact and dropping the product onto the ground.
- Do not cover the vents and holes on the enclosure. Ensure good ventilation by not placing the machine on a bed, sofa, or rug. Improper ventilation can lead to overheating and reduce service life.
- The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
- Keep the product away from heat sources such as radiators, water heaters, stoves, and other heating products.
- Avoid prolonged exposure to direct sunlight, as this can damage the LCD screen.
- To avoid damaging the product, do not attempt to take apart or repair the unit yourself. There are no user-adjustable components inside.
- To maintain the LCD screen, follow these guidelines to prevent scratches, discoloration, and other damage:
- Refrain from using hard objects to hit the screen.
- Do not force to wipe the screen.
- Do not use chemical solutions to clean the screen.
- Do not spray any detergent directly on the screen.
- Do not write on the screen directly.
- Do not stick anything on the screen.
- To protect the plastic cover, follow these ways to avoid damage:
- Do not use chemical solutions to clean the cover.
- Keep away from volatile substances.
- Do not clean the case aggressively.
- Simply wipe with a clean soft cloth and ensure no water is on the cover.
3. Key Features
- 6-inch 1920x1080 Full HD IPS screen.
- Super lightweight design, ideal for gimbals and handheld applications (weighs only 175g).
- Simple and intuitive button operation.
- Supports 3D LUT Log to REC.709 conversion and user 3D LUT upload (up to 32 files).
- Professional monitoring functions: Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome, Peaking Filter, Exposure, 3D LUT, Zoom-in, Check Field, Overscan, DSLR Scale, Nine Grid, Image Freeze, Image Flip, Anamorphic Mode, Pixel-to-Pixel, Embedded Audio, Screen Marker.
- Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F & LP-E6 dual-purpose battery plate.
- Stereo Earphone output.
- DC 8.4V power out to power your DSLR camera or mirrorless camera.
- 4K HDMI Input & Loop Output: Supports 4096x2160p (24Hz) and 3840x2160p (30/29.97/25/24/23.98Hz).
4. Product Overview
4.1 Front and Back Panels
The monitor features a clean front panel for optimal viewing and a functional back panel designed for battery mounting and heat dissipation.
4.2 Dimensions and Weight
The FEELWORLD S55 V3 is designed to be small and lightweight, making it highly portable and suitable for various shooting environments.
- Unit Size: 151L x 92H x 29.5D (mm)
- Unit Weight: 175g (without battery)
4.3 Display Characteristics
The S55 V3 features a high-quality IPS display for clear and accurate image rendition.
- Screen Size: 5.5" IPS
- Resolution: 1280 x 720 pixels
- Display Colors: 16.7M (8 bit)
- Color Gamut: 70% NTSC
- Brightness: 450cd/m²
- Contrast Ratio: 1000:1
- Viewing Angle: 80°/80° (L/R) 80°/80° (U/D)
Color Calibration
The FEELWORLD S55 V3 uses the professional Rec.709 HD color standard and advanced color calibration technology to ensure accurate color reproduction, providing a true representation of the camera sensor's output.
Wide Viewing Angle
The IPS monitor provides a wide visual view with consistent image clarity and colors from a 160-degree viewing angle both vertically and horizontally, making it easy for multiple crew members to monitor simultaneously.
4.4 Packing List
The following items are included in the product package:
- S55 V3 Monitor
- Micro HDMI Cable
- Sunshade
- Tilt Arm
- Type-C to USB Cable
- Operation Manual (this document)
5. Setup
5.1 Mounting the Monitor
1/4" Screw Lock Installation
The monitor features 1/4" screw lock points on the bottom and right side for flexible mounting options. The external 1/4 screw design contributes to the monitor's lighter and thinner profile.
Tilt Arm Mounting
The monitor secures to your camera using the included Tilt Arm via shoe mount or 1/4"-20 thread. The Tilt Arm enables 180° of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm allows you to secure additional equipment (like a microphone, LED light, or wireless receiver) that would otherwise be displaced from the camera's accessory shoe.
The monitor can be flexibly installed on both cameras and gimbals. If installing on the bottom of a device, you can use the image flip function to maintain the correct screen orientation.
5.2 Power Supply
The monitor supports multiple power input options:
- DC IN 12V: Standard DC power input.
- Type-C 5V: Type-C power input, recommended for local power supply only. It is also used for firmware updates and LUT file imports.
- Dual-purpose Battery Plate: The rear cover is equipped with an F970 and LP-E6 dual-purpose battery plate, compatible with Sony F970 series (F970, F960, F950, F930, F770, F750, F730, F570, F550, F530) and Canon LP-E6 series batteries. It is recommended to use standard original F970 batteries.
5.3 Connections
The monitor provides various input and output ports for versatile connectivity:
- HDMI IN: HDMI signal input.
- HDMI OUT: HDMI signal output (loop-out).
- DC OUT 8.4V: DC power output interface (polarity as output power +). This barrel output can power your camera with a separately available DC coupler via adapter (e.g., NP-FW50 Sony & LP-E6 Canon & DMW-BLF19 Panasonic).
- 3.5mm Earphone Port: Stereo earphone output for audio monitoring.
5.4 Sunshade Installation
The S55 V3 monitor comes with an integrated sunshade fixing frame for easy installation. This helps photographers focus on video and avoid strong light interference.
- Attach the Velcro (hook side) to the outside of the sunshade frame of the monitor.
- Open the sunshade.
- Align the Velcro (loop side) on the inside of the sunshade with the Velcro (hook side) on the monitor sunshade frame.
- Complete the sunshade installation.
6. Operating Instructions
6.1 Button Instruction
The monitor features intuitive buttons for easy navigation and control.
| Button | Function when OSD is not displayed | Function when OSD is displayed |
|---|---|---|
| F1 | Custom button F1 | / |
| F2 | Custom button F2 | / |
| F3 | Custom button F3 | / |
| MENU | Display OSD Main menu | Return to previous OSD menu |
| V (<) | Decrease the volume or backlight | Select next menu item; Decrease or adjust value of selected parameter |
| Λ (>) | Increase the volume or backlight | Select previous menu item; Increase or adjust value of selected parameter |
| EXIT/Power | Power On/Off button; Return/Exit Menu |
6.2 Menu Operation Instruction
After correctly connecting to the power supply (red indicator), the monitor will default to turn on automatically, and the indicator will turn Yellow. Upon inputting an HDMI signal, the indicator will turn Green from Yellow.
You can also set the power to "Manually" in the System menu under Power setting. After this setting, you will need to long press the EXIT/Power button to turn on the monitor when the power supply is plugged in.
When the menu is not displayed, directly press the "V" or "Λ" button to adjust the volume or backlight. You can set this behavior in the Left Right Key Set of the User Option menu.
To enter the OSD main menu, press the "MENU" button. Press "MENU" again to enter a secondary menu. Use the "V" or "Λ" buttons to select items. After selection, press "MENU" to confirm and enter the function menu. Use "V" or "Λ" buttons to select the corresponding function or adjust parameters. Press EXIT/Power button to return or exit the menu.
6.3 Menu Function Instruction
The S55 V3 offers a comprehensive suite of professional monitoring functions to assist with accurate exposure, focus, and color analysis.
Assist Functions
| Function | Description |
|---|---|
| All Waves | Turns on/off Waveform, Vector, Histogram, and Embedded Audio displays simultaneously. |
| Waveform | Displays overall brightness of the image, assisting with exposure correction and checking lighting evenness. Modes: RGB, YUV, Y. Position X/Y (0-100), Waves Trans. (Off, 25%, 50%, 75%). |
| Vector | Shows image saturation and pixel distribution on the color spectrum. Position X/Y (0-100). |
| Histogram | Displays graphic of color tone distribution and exposure status. RGB Histogram shows overlapping histograms in red, green, and blue channels. Y Histogram checks picture brightness. Position X/Y (0-100). Modes: RGB1, RGB2, Y. |
| Focus Assist | Highlights in-focus areas to aid quick and accurate focusing. Peaking Level (1-10). Colors: Red, Green, Blue. |
| Embedded Audio | Provides numerical indicators and headroom levels for audio. Position X/Y (0-100). |
| Over Exposure | Fills areas exceeding a certain threshold with a striped pattern to highlight overexposed regions. Exposure Level (10-100). |
| Check Field | When enabled, hue and saturation can be adjusted quickly and accurately. Modes: Red, Green, Blue, Mono. |
| False Colors | Depicts objects in colors that differ from a true color image, aiding in exposure evaluation. Modes: Normal, ARRI. |
Marker Functions
| Function | Description |
|---|---|
| Grid | Divides the picture into equal grids (e.g., 2x2, 5x5, 9x9, Custom). Rows/Columns (2-9). Colors: Red, Green, Blue, Black, White, Gray. |
| Safe Frames | Displays safe area markers. Modes: 80%, 85%, 90%, 93%, 96%, 2.35:1, 9:16. Colors: Red, Green, Blue, Black, White, Gray. |
| Center Marker | Displays a center marker. Colors: Red, Green, Blue, Black, White, Gray. |
| Ratio Marker | Displays aspect ratio markers. Modes: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1, 9:16. Colors: Red, Green, Blue, Black, White, Gray. Modified Mark: 0-5. |
Image Functions
| Function | Description |
|---|---|
| Scan Mode | Under Scan, Over Scan. |
| Aspect Ratio | Provides various aspect ratios to match different camera anamorphic lenses. Modes: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen. |
| Anamorphic | Allows use of anamorphic lenses/adapters and displays unsqueezed image. Modes: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X-2.00X). |
| Image Flip | Flips the image horizontally (H Flip), vertically (V Flip), or both (H_V Flip). |
| Zoom Mode | Amplifies HD signal for high-quality close-ups. Modes: 2X, 4X, 9X, 16X, User (customizable 100%-200%). |
| Image Freeze | Freezes the current image on screen. |
| P2P (Pixel-to-Pixel) | Displays the image without scaling, essential for capturing optimum detail. |
User Option
| Function | Description |
|---|---|
| LUT | When LUT Switch is on, use built-in LUTs (SLOG2, SLOG3, LOGC, VLOG) or custom loaded LUTs (up to 32). LUT is a table for quickly looking up and output specific color data. |
| HDR | Provides more dynamic range and image details, reflecting visual effects in the real environment. Modes: HLG1, HLG2, HLG3. |
| Display Adjustment | Adjusts Backlight (0-100), Brightness (0-100), and Contrast (0-100). |
| Color Adjustment | Adjusts Saturation (0-100), Tint (0-100), Display Range (Auto, Limit, Full), and Color Temp. (5600K, 6500K, 9300K, User). |
6.4 System Settings
| Setting | Description |
|---|---|
| User Switch | Save and recall up to 4 custom menu settings. |
| Language | Select display language: English, Simplified Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Traditional Chinese, Korean, Russian. |
| OSD Time | Set the display duration of the menu on the screen: Off, 15Sec, 30Sec, 45Sec. |
| OSD Trans | Adjust the transparency of the menu picture background: Off, 25%, 50%, 75%. |
| No Signal | Change the background color of the screen when no signal is detected: Red, Green, Blue, Black, White, Gray. |
| EDID Settings | Compatible with different camera resolutions. Settings: 2.0, 1.4. Default to 2.0. If set to 1.4 manually, then input 4K60 signal, you need to set to 2.0 again. |
6.5 Power Settings
| Setting | Description |
|---|---|
| Power on | Set power on behavior: Auto, Manual. Default is Auto. If Manual, press EXIT/Power button to turn on after power plug-in. |
| Reset | Select Reset and press MENU button to Confirm, returning the system to original settings. |
6.6 Firmware Update
To update the monitor's firmware:
- Format a USB flash drive to FAT32.
- Copy the update file to the USB flash drive.
- Insert the USB flash drive into a Type-C to USB adapter and connect it to the monitor's TYPE-C interface.
- Enter the main menu, navigate to Firmware Update, and press MENU to Confirm.
- The monitor will turn off automatically after finishing. Turn it on manually.
- Check the firmware version to ensure it is the latest one.
6.7 How to Load LUT
The monitor supports loading up to 32 custom LUT files.
- USB Flash Drive Format: FAT32
- Max Files Limit: Maximum 32 LUT files.
- File Requirements:
- The LUT file format suffix should be .cube.
- Single file size should not exceed 7.9Mb.
- Supports LUT-3D-Size 16, 17, 32, 33, 64, 65.
- LUT file names must be in English or Arabic numerals.
Steps for Loading:
- Ensure the USB flash drive is inserted into a Type-C to USB adapter and connected to the monitor's TYPE-C interface.
- Enter the main menu, navigate to
--LUT--Lut Import, and press Confirm to load. The monitor will auto-detect the USB flash drive. - If a valid LUT file is found, the monitor will load the LUT files and show "[n] name" (where [n] is the quantity number). If loading is successful, the screen will show "complete[n]".
How to Clear Imported LUTs:
Insert an empty USB flash drive into the monitor, enter the main menu, navigate to --LUT--Lut Import, and press Confirm. The imported LUTs will be cleared.
7. User Tips
- Battery Management: Always remove the battery from the monitor if you don't plan to use it for an extended period to prevent discharge.
- Screen Protection: Use the included sunshade in bright outdoor conditions to improve visibility and protect the screen from direct sunlight.
- Cable Management: Secure all cables (HDMI, power) to prevent accidental disconnections during shooting, especially when using the monitor on gimbals or moving setups.
- Custom Buttons: Utilize the F1, F2, F3 custom buttons to quickly access your most frequently used functions like Focus Assist or Histogram for a more efficient workflow.
- Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance and access to new features.
8. Troubleshooting
8.1 Only black and white or monochrome picture:
- Please check saturation, brightness & contrast adjustment settings.
- Please check if "Check Field" is set to black, white, monochrome image, or other conditions.
8.2 No Image after powering on:
- Check if the signal cable connection is in good condition.
- Check the signal cable connection, and ensure you are using the standard adapter to connect the monitor. If power is supplied by battery, please check if the battery is fully charged.
8.3 Earphone No sound:
Check if Volume control is open. Press the volume button and try to increase the volume.
If there are still other problems, please contact our related technologists for support.
As we are continuously improving product features and performance, specifications may change without prior notice.
9. Specifications
| Parameter | Value |
|---|---|
| Description | 5.5" 4K HDMI On-camera Monitor for Stabilizer Gimbal |
| Model | S55 V3 |
| Screen size | 5.5" IPS |
| Display Colors | 16.7M (8 bit) |
| Color Gamut | 70% NTSC |
| Resolution | 1280 x 720 pixels |
| Dot pitch | 0.0945 (H) × 0.0315 (W) mm |
| Aspect Ratio | 16:9 |
| Brightness | 450cd/m² |
| Contrast | 1000:1 |
| Backlight | LED |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Input | HDMI, DC IN 5V (Type-C) |
| Output | HDMI, DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner) |
| Audio | 3.5mm Stereo Headphone |
| HDMI Support Format |
|
| Input Voltage | DC: 7~24V |
| Power Consumption | ≤9W |
| Battery Plate | F970/LP-E6 Dual-purpose Battery Plate |
| Install Way | 1/4-20 mount points (bottom, right) |
| Working Temperature | -20°C ~ 50°C |
| Storage Temperature | -30°C ~ 60°C |
| Unit Size | 151L x 92H x 29.5D (mm) |
| Unit Weight | 175g |
10. Support
For further assistance, please refer to the official user manual PDF available online or contact FEELWORLD customer support.
A detailed PDF version of this manual can be found at: FEELWORLD S55 V3 User Manual (PDF)