1. Product Overview
The Toolour Corded Rotary Tool Kit Model 203 is a versatile electric tool designed for a wide range of DIY and craft projects. It features a powerful motor with three adjustable speeds, allowing for precise control over various tasks. The kit includes 24 accessories, making it suitable for sanding, polishing, engraving, cutting, drilling, grinding, trimming, and cleaning on materials such as wood, metal, glass, ceramic, and jade.

Figure 1: Overview of the Toolour Corded Rotary Tool Kit and included accessories.
Included Components:
- 1 x Electric Rotary Tool (Model 203)
- 1 x 12V Power Adapter (EU or US Plug, depending on region)
- 24 x Assorted Accessories (e.g., drill bits, saw blades, polishing wheels, sandpaper circles, grinding heads, tapping rods)
- 1 x Mini Tool Storage Box
Available Colors:
The rotary tool is available in Gray, Green, and Red variations.

Figure 2: Available color options for the Toolour Rotary Tool.
2. Setup Instructions
2.1 Unpacking and Inspection
- Carefully remove all components from the packaging.
- Verify that all listed components are present and undamaged.
- Retain the packaging for future storage or transport.
2.2 Attaching Accessories
The rotary tool uses a copper chuck system with a diameter range of 0.5-3.2mm, allowing for various accessory sizes. To attach or replace an accessory:
- Press down the chuck lock button located near the chuck. This prevents the shaft from rotating.
- Unscrew the outer chuck nut counter-clockwise to loosen it.
- Remove the existing collet (if any) and insert the appropriate collet for your desired accessory size (0.5/1.0/1.5/2.4/3.0/3.2mm).
- Insert the accessory shaft into the collet.
- Tighten the outer chuck nut clockwise until the accessory is securely held. Do not overtighten.
- Release the chuck lock button.

Figure 3: Steps for replacing the chuck and inserting an accessory.
2.3 Power Connection
Connect the provided 12V power adapter to the rotary tool's power input port. Then, plug the adapter into a suitable wall outlet (EU or US type, depending on your region).

Figure 4: US and EU 12V power adapters.
3. Operating Instructions
3.1 Power On/Off and Speed Adjustment
The rotary tool features a single button for power control and speed adjustment. It has three distinct speed settings:
- Press the button once: Activates Speed 1 (5000 r/min). One indicator light will illuminate.
- Press the button a second time: Activates Speed 2 (10000 r/min). Two indicator lights will illuminate.
- Press the button a third time: Activates Speed 3 (15000 r/min). Three indicator lights will illuminate.
- Press the button a fourth time: Turns the tool off.

Figure 5: Operation methods and speed display.
3.2 General Usage
Select the appropriate accessory and speed for your task. Always wear safety glasses and ensure your work area is well-lit and clear of obstructions. Apply gentle pressure and let the tool do the work.

Figure 6: Examples of rotary tool applications: drilling, engraving, grinding, and sanding.
3.3 Accessory Guide
The kit includes a variety of accessories for different functions:
- Twist Drill Bits: For drilling small holes in various materials.
- Circular Saw Blade: For cutting thin materials.
- Wool Polishing Wheel: For polishing and buffing surfaces.
- Sandpaper Circle: For sanding and smoothing surfaces.
- Tapping Rod: For specific tapping applications.
- Wheel Grinding Head: For grinding and shaping.

Figure 7: Examples of included accessories.
Video 1: Product demonstration showing accessory installation and various uses.
4. Maintenance
4.1 Cleaning
- Always unplug the tool before cleaning.
- Use a soft, dry cloth to wipe down the tool's exterior.
- Remove any dust or debris from the ventilation slots to prevent overheating.
- Clean accessories after each use to maintain their effectiveness and prolong their lifespan.
4.2 Storage
- Store the rotary tool and its accessories in a dry, clean place, away from direct sunlight and moisture.
- Use the provided mini tool storage box to keep accessories organized and protected.
- Ensure the tool is unplugged and cooled down before storing.
5. Troubleshooting
5.1 Tool Not Turning On
- Check if the power adapter is securely plugged into both the tool and the wall outlet.
- Verify that the wall outlet is functional by testing it with another device.
- Ensure the power button on the tool is pressed correctly to activate a speed setting.
5.2 Accessory Not Fitting or Loose
- Ensure you are using the correct collet size for the accessory's shaft diameter (0.5-3.2mm).
- Make sure the chuck lock button is pressed when inserting or removing accessories, and released when tightening.
- Tighten the chuck nut firmly, but do not overtighten, to secure the accessory.
5.3 Reduced Performance
- Check if the accessory is worn out and needs replacement.
- Ensure the correct speed setting is selected for the task and material.
- Clean any debris from the accessory or the tool's chuck area.
6. Specifications
| Attribute | Specification |
|---|---|
| Model Number | 203 |
| Material | ABS |
| Color Options | Green, Grey, Red |
| Collet Chuck Diameter | 0.5-3.2mm |
| Rated Power Input | 10W |
| No-load Speed | 5000 / 10000 / 15000 r/min (3-speed) |
| Power Source | DC, Built-in lithium battery |
| Rated Voltage | 12V |
| Plug Type | EU/US |
| Weight | 0.24kg |
| Dimensions (Tool) | Approx. 14.5cm (Length) x 3cm (Width) |
| Application | Home DIY |
| Certification | CE |

Figure 8: Rotary tool dimensions.
7. User Tips
- For delicate tasks like engraving or fine polishing, start with the lowest speed setting (5000 RPM) and gradually increase if needed.
- When working with harder materials, ensure the accessory is securely fastened and apply consistent, light pressure to avoid damaging the tool or the workpiece.
- Regularly check accessories for wear and tear. Dull or damaged bits can affect performance and safety.
- Keep the tool's ventilation holes clear to prevent motor overheating during extended use.
8. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Toolour Corded Rotary Tool Kit, please refer to the official documentation provided with your purchase or contact the seller directly. A detailed user manual in PDF format may be available for download from the seller's product page or website. (Reference: User manual (PDF))