1. Introduction
Thank you for choosing the CYCLAMI CY180/CY180T Bicycle Tail Light. This smart tail light is designed to enhance your cycling safety and experience with features like wireless remote control, multiple dynamic patterns, intelligent brake sensing, and automatic start-stop functionality. This manual provides detailed instructions for proper setup, operation, and maintenance of your device.
2. Package Contents
Please check the box for the following items:
- 1 x CY180 Expression Tail Light
- 1 x S11 Cushion Version Bracket
- 1 x S10 Seat Post Strap Base (Beveled)
- Several Cushion Bracket Ties
- 1 x Type-C USB Charging Cable
- 1 x Wireless Remote Control (Included with CY180T model, optional for CY180)

Figure 2.1: Standard Edition Package Contents
3. Setup
3.1 Charging the Tail Light
Before first use, fully charge the tail light. The device uses a Type-C charging port.
- Locate the Type-C charging port on the tail light, usually covered by a silicone flap.
- Connect the provided Type-C USB cable to the tail light and the other end to a USB power source (e.g., computer, USB wall adapter).
- The battery animation on the tail light display indicates that charging is in progress.
- A full charge typically takes about 1.5 hours.
- After charging is complete, be sure to cover the silicone flap to maintain waterproof integrity.

Figure 3.1: Type-C Fast Charging Demonstration
3.2 Mounting the Tail Light
The CY180/CY180T offers versatile mounting options:
3.2.1 Seat Cushion Bracket Installation
- Attach the S11 Cushion Version Bracket to the rails under your bicycle seat using the provided cushion bracket ties. Ensure the ties are tightened securely.
- Slide the tail light onto the bracket until it clicks into place, indicating it is locked.
3.2.2 Seat Post Strap Base Installation
- Wrap the S10 Seat Post Strap Base around your bicycle's seat post. Ensure the thicker side of the strap faces downward and the narrower side faces up for proper orientation.
- Securely fasten the strap.
- Slide the tail light onto the base until it clicks into place.
Video 3.1: Installation Demonstration (0:44 - 0:51)
Description: This video segment demonstrates how to install the tail light using both the seat cushion bracket and the seat post strap base.
3.2.3 Remote Control Handlebar Installation (for CY180T or optional remote)
- Attach the remote control strap base to your bicycle's handlebar in a convenient location.
- Securely fasten the strap.
- Place the remote control onto the base.
Video 3.2: Remote Control Handlebar Installation (0:52 - 0:54)
Description: This video segment shows the installation of the remote control onto the bicycle handlebar.
3.3 Remote Control Pairing Instructions
To use the wireless remote control, it must first be paired with the tail light:
- Step 1: Press and hold the power button on the tail light for 1-3 seconds to turn it on.
- Step 2: Press the tail light's power button 4 times in quick succession. The main display will show an 'X' pattern, indicating pairing mode is active.
- Step 3: Take out the CY180T remote control. Press and hold the power button on the remote control.
- The tail light's main screen will display a '√' pattern, indicating successful pairing.
Video 3.3: Remote Control Pairing Demonstration (0:16 - 0:22)
Description: This video segment visually guides you through the remote control pairing process.
3.4 Remote Control Battery Replacement
The remote control uses a CR2032 coin cell battery. To replace it:
- Prepare a flathead screwdriver and a new CR2032 battery.
- Carefully pry open the back cover of the remote control using the flathead screwdriver.
- Remove the two small screws securing the circuit board.
- Carefully remove the old CR2032 battery.
- Insert the new CR2032 battery with the positive (+) side facing up.
- Re-secure the circuit board with the screws and snap the back cover into place.
- After replacement, test the remote control to ensure it makes good contact and functions correctly.
Video 3.4: Remote Control Battery Replacement (0:23 - 0:31)
Description: This video segment demonstrates the steps for replacing the remote control battery.
4. Operating Instructions
4.1 Power On/Off
- To Turn On: Press and hold the power button on the tail light for 1 to 3 seconds.
- To Turn Off: Press and hold the power button on the tail light for 1 to 3 seconds.
4.2 Switching Light Patterns/Expressions
- Using the Tail Light Button: After powering on, click the power button on the tail light to cycle through the 14 built-in emoji patterns.
- Using the Remote Control: Press the power button on the remote control to switch between light expression modes.
4.3 Using Turn Signals (with Remote Control)
The remote control allows you to activate dynamic turn signals:
- Press the '<' (Left Turn) button on the remote control to display the dynamic left turn arrow.
- Press the '>' (Right Turn) button on the remote control to display the dynamic right turn arrow.
Video 4.1: Dynamic Tail Light Turn Signal Effect (0:55 - 0:58)
Description: This video segment demonstrates the activation of left and right turn signals using the remote control.
4.4 Co-frequency Mode for Group Riding
This feature allows multiple CYCLAMI tail lights to synchronize their patterns for group rides:
- Ensure at least two CYCLAMI tail lights are powered on.
- On the 'host' tail light, double-click the power button. The screen will display a specific pattern indicating it's ready to host.
- On the 'secondary' tail light, double-click the power button. It will connect to the host.
- Once connected, changing patterns on the host tail light will also change the patterns on the secondary tail light(s).

Figure 4.1: Co-frequency Mode for Group Riding
4.5 Intelligent Brake Sensor
The tail light is equipped with an intelligent brake sensor for enhanced safety:
- When the tail light is on, it continuously senses braking.
- Upon detecting a brake, the light automatically enters a high-brightness mode to alert vehicles behind you, helping to prevent rear-end collisions.

Figure 4.2: Intelligent Brake Sensor
4.6 Vibration Sensor / Automatic Wake-up
To conserve battery, the tail light has smart power management:
- If the light remains still for 30 seconds, it will enter a sleep (hibernation) mode.
- In sleep mode, any vibration will automatically wake up the light.
- If the light remains inactive for 30 minutes, it will automatically shut down completely.

Figure 4.3: Vibration Sensor Automatic Wake-up
4.7 Battery Level Check
You can check the remaining battery power when the device is off:
- When the tail light is off, click the power button once. The display will show the current battery level (e.g., 100%, 70%, 50%, 10%).
5. Maintenance
5.1 Cleaning
To keep your tail light in optimal condition, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents.
5.2 Battery Care
- Always ensure the Type-C charging port's silicone flap is securely closed when not charging to prevent water ingress.
- For optimal battery life, avoid fully discharging the battery frequently. Charge it regularly.
- If storing the device for an extended period, charge it to about 50% and store it in a cool, dry place.
5.3 Waterproofing
The CY180/CY180T has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is suitable for use in rainy conditions.
- Important: Do not immerse the tail light in water for a long time.
- Ensure the charging port cover is always sealed when not charging.

Figure 5.1: IPX6 Waterproof Rating
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tail light does not turn on. | Low battery; Device malfunction. | Charge the device fully. If still not working, contact support. |
| Remote control not working/pairing. | Remote battery low; Not paired correctly; Out of range. | Replace remote battery. Re-attempt pairing (Section 3.3). Ensure remote is close to the tail light. |
| Short battery life. | Constant light mode; Frequent use of high-brightness patterns; Battery degradation. | Use expression modes for longer battery life. Ensure full charge. If performance significantly degrades, contact support. |
| Physical damage / rattling inside. | Internal component dislodged. | Discontinue use to prevent further damage. Contact customer support for assistance or replacement. |
7. Specifications
| Feature | Specification |
|---|---|
| Brightness | 100 lumens |
| Emoticon Patterns | 14 built-in dynamic patterns |
| Special Functions | Brake highlights, pattern switching, remote control turn signal, co-frequency mode, vibration sensor auto wake-up |
| Battery | 500mAh 3.7V rechargeable |
| Battery Life | Constant light: 5 hours; Expression modes: 12-30 hours |
| Charging Time | Approx. 1.5 hours (Type-C) |
| Body Material | ABS, PC |
| Waterproof Level | IPX6 |
| Dimensions | 39 x 39 x 25 mm |
| Weight | Approx. 27g |

Figure 7.1: Product Dimensions and Specifications
8. User Tips
- Power Control: While the remote control can change patterns and activate turn signals, the main power button on the tail light itself must be used to turn the device on and off.
- Remote Compatibility: If you purchase a tail light without a remote control, you can later acquire a compatible CYCLAMI remote control and pair it with your existing tail light following the pairing instructions (Section 3.3).
- Initial Use: For optimal performance, fully charge and discharge the tail light once before its first regular use.
9. Warranty and Support
CYCLAMI products come with a one-year after-sales warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Damage to the product caused by human error, misuse, or unauthorized modifications is not covered by the warranty.
For warranty claims, technical support, or any product-related inquiries, please contact us through the following channels:
- Official Website: www.cyclami.com
- Aftermarket Email: cyclami@outlook.com
Please have your purchase details ready when contacting support.