1. Introduction
The Mijia Humidifier 3 is designed to provide a comfortable and healthy indoor environment by maintaining optimal humidity levels. This appliance features a 4.5L large capacity water tank, offering up to 32 hours of continuous humidification. With a high humidifying capacity of 350mL/h and 99.9% silver ion antibacterial technology, it ensures efficient and clean mist output. Its quiet operation (as low as 34dB(A)) and smart features, including Wi-Fi connectivity and timing functions, make it suitable for various living spaces.
2. Safety Instructions
WARNING: Please read all safety instructions carefully before use to prevent injury or damage.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or qualified persons in order to avoid a hazard.
- Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
- Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.
- Unplug the appliance during filling and cleaning.
- Never leave water in the reservoir when the appliance is not in use. Empty and clean the humidifier before storage. Clean the humidifier before next use.
- Micro-organisms that may be present in the water or in the environment where the appliance is used or stored, can grow in the water reservoir and be blown in the air causing very serious health risks when the water is not renewed and the tank is not cleaned properly every 3 days.
- Care should be taken when using the appliance due to the emission of hot water vapour.
- Clean the water tank every 3 days.
- This appliance contains a UV emitter. Do not stare at the light source.
- Under normal use conditions, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
- Do not plug in or unplug the humidifier with wet hands so as to avoid the risk of electric shocks.
- Do not attempt to disassemble, repair, or modify the humidifier by yourself.
- Do not touch the vaporizer once the humidifier is turned on. Otherwise, you may feel a sting.
- Do not tangle, damage, or place heavy objects on the power cord so as to avoid the risk of electric shocks, short circuits, or fire.
- Immediately unplug the humidifier if there is an error during use, and contact after-sales service.
- To avoid safety hazards, the power cord must be replaced by the manufacturer or the after-sales department if it is damaged or broken.
- During the working of the humidifier, do not remove the water tank from the base, and never touch the water conduits or any components inside the reservoir.
- This humidifier is intended for indoor use only.
- Unplug the humidifier during thunderstorms or when you do not plan to use it for an extended period of time.
- Do not turn the humidifier upside down when it is working or there is water in the tank so as to avoid damage to the internal electronic components.
- Keep hair and fabrics away from the humidifier so as to prevent them from falling into or blocking the inlets and outlets.
- Do not sit on, lean on or tilt the humidifier.
- When using the humidifier in conjunction with gas-fueled appliances including gas stoves, gas heaters, make sure there is sufficient ventilation to avoid carbon monoxide poisoning.
- Do not move the humidifier during use. Turn off and unplug the humidifier before moving it, cleaning it, or adding water.
- Always place the humidifier on a flat, level surface. Otherwise, the water level reading may be incorrect or the water tank may overflow.
- The voltage of the power outlet must be the same as the voltage of this humidifier. Do not use the humidifier if the voltages do not match and please contact your dealer.
- Only use the humidifier in normal room temperatures (5°C to 40°C).
- Avoid getting water into the humidifier while cleaning.
3. Product Overview
Operating Process
The Mijia Humidifier 3 uses high-frequency ultrasonic waves (1.7 million vibrations per second) to vaporize water into ultra-fine particles (1-5 µm). These particles are then diffused into the air by a pneumatic unit, helping to maintain ideal humidity and prevent static electricity.
Features
- Trendy appearance and exquisite craftsmanship
- Microcomputer controlled, safe, and accurate
- Constant humidity, mist adjustment, and UV light sterilization
- Smart Wi-Fi connection and simple to use
- Easy-to-fill and easy-to-remove water tank
Components Diagram
- Water Tank Lid
- Mist Outlet
- Water Tank
- UV Light Cover
- Air Outlet
- Base
- On/Off & Mode Button
- Air Inlet
- Silicone Base
- Power Cord
- Wi-Fi Button
- Wi-Fi Indicator
- Vaporizer
- Water Conduits
- UV Light
4. Setup
- **Placement**: Place the humidifier on a flat, level surface. Do not place it directly on wooden floors or within 2 meters of furniture and appliances to prevent moisture damage. Keep it away from heat sources and direct sunlight.
- **Add Water**: Remove the water tank lid and add clean tap water or distilled water up to the maximum water level mark. The 4.5L large capacity tank allows for up to 32 hours of humidification. You can add water conveniently without opening the lid.
- **Assemble**: Place the water tank back onto the base securely.
- **Power On**: Plug the humidifier into a power outlet. Ensure the operating voltage matches the power outlet's voltage. The humidifier will beep once and enter standby mode with the Wi-Fi indicator blinking.
Note on Adapters:
This product is the Chinese version and comes with a Chinese standard power plug. An appropriate adapter (EU, UK, AU, or US) will be provided based on your selection at no extra cost.
5. Operating Instructions
- **Turn On and Adjust Speed**: Press the On/Off button to turn on the humidifier. It will beep and start humidifying. The default speed is low (1/4 of circular LED indicator lit). Press again to cycle through medium (1/2 lit), high (3/4 lit), and constant humidity mode (complete circular LED indicator lit). The humidifier remembers the last used mode.
- **Constant Humidity Mode**: In this mode, the humidifier will automatically maintain an approximate humidity of 60%.
- **Turn Off**: Press and hold the On/Off button for three seconds. The humidifier will beep and its circular LED indicator will turn off.
- **Wi-Fi Button**: When the humidifier is working, press and hold the Wi-Fi button for three seconds. It will beep twice, and the Wi-Fi indicator will blink white, indicating it's ready for connection. Once connected via the Mi Home/Xiaomi Home app, the Wi-Fi indicator will turn white.
- **Light Control**: While the humidifier is working, press the Wi-Fi button briefly. You will hear a beep, and the water tank light, circular LED indicator, and Wi-Fi indicator will toggle on/off. Note that the humidifier continues to operate normally even if the lights are off. Touch sounds can be enabled/disabled via the Mi Home/Xiaomi Home app.
- **Dry-Run Protection**: If the water tank runs out of water or is removed from the base, the humidifier will beep three times and enter standby mode, with the circular LED indicator turning red. Refill the water or replace the tank to resume operation.
6. Daily Care & Maintenance
- Always unplug the humidifier before cleaning.
- The water conduits can be cleaned directly with a clean, soft, damp cloth.
- It is recommended to clean the water conduits and the vaporizer once a week. If there is limescale, pour some citric acid into the conduits to dissolve it, then use cotton swabs or a soft brush to remove the limescale and rinse with water.
- Clean the water tank every 3 days to prevent the growth of micro-organisms.
- The 185mm large caliber water tank is designed for easy disassembly, facilitating thorough cleaning.
- The humidifier supports direct flushing for easy and fast cleaning.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Humidifier not working / Red indicator light | Water tank is empty or not properly installed. | Refill the water tank or ensure it is correctly placed on the base. |
| Low humidity output | Too much dirt or dust in the water conduits. | Clean the water conduits as described in the maintenance section. |
| Unusual sounds, bad odors, or overheating | Internal malfunction or blockage. | Immediately stop using the humidifier and contact after-sales service. |
| Water leakage / Damage | Adding water over 40°C, water flowing into air outlet, freezing temperatures, metal objects/chemicals in conduits. | Ensure water is below 40°C, avoid water in air outlet, empty tank in cold environments, do not add foreign objects/chemicals. |
| Incorrect water level reading / Overflow | Humidifier not placed on a level surface. | Always place the humidifier on a flat, level surface. |
| Humidifier not turning on | Incorrect voltage or not fully assembled. | Ensure voltage matches and the humidifier is fully assembled before plugging in. |
8. Specifications
| Feature | Detail |
|---|---|
| Name | Mi Smart Antibacterial Humidifier |
| Model | ZNJSQ01DEM |
| Rated Input | 25 W |
| Rated Voltage | 220-240 V~ |
| Rated Frequency | 50/60 Hz |
| Water Tank Capacity | 4.5 L |
| RF Specification | 2.4 G Wi-Fi |
| Maximum Output Power | <20 dBm |
| Net Weight | 1.9 kg |
| Noise Emission | ≤38 dB |
| Max. Humidifying Capacity | 300 mL/h |
| Item Dimensions | 190 × 190 × 353 mm |
| Materials | ABS, PC & PA |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
| Working Frequency | 2412-2472 MHz |
| CID | WFA97113 |
| Package Length | 37 cm |
| Package Width | 23 cm |
| Package Height | 23 cm |
| Package Weight | 1.87 kg |
9. Connect with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app, allowing you to control your device and interact with other smart home devices.
- Scan the QR code below to download and install the app. If the app is already installed, you will be directed to the connection setup page.
- Alternatively, search for "Mi Home/Xiaomi Home" in your app store.
- Open the Mi Home/Xiaomi Home app, tap "+" on the upper right corner, and follow the prompts to add your device.
Note:
- The app is referred to as Xiaomi Home app in Europe (except for Russia). The name displayed on your device should be taken as the default.
- This product version is for the China region. When adding cameras, please select the Chinese server in the Mijia settings.
- The app version may be updated; please follow the instructions based on the current app version.
10. User Tips
No specific user tips were available from provided reviews or Q&A content.
11. Warranty & Support
For further information, please visit www.mi.com.
This product is manufactured for Xiaomi Communications Co., Ltd. by Foshan Shunde Deerma Electric Appliances Co., Ltd. (a Mi Ecosystem company).
Address: No.4-1 Longhui Road, Malong Village Committee, Beijiao, Shunde, Foshan, Guangdong.
The full text of the EU declaration of conformity for radio equipment type ZNJSQ01DEM is available at: http://www.mi.com/global/service/support/declaration.html
A user manual in PDF format is also available for download: User manual (PDF)