Preface
Thank you for purchasing this HOMEFISH electrical appliance! This manual is intended to provide you with safe and correct usage guidance, help you fully understand the product functions, and extend the product service life. Please read this manual carefully before use and operate strictly in accordance with the instructions. If you have any questions during use, please refer to the relevant content of this manual or contact after-sales service.
This manual is applicable to your HOMEFISH Cordless Hair Clipper & Beard Trimmer. The specific product functions shall prevail as described herein.
Safety Precautions
1. General Safety Guidelines
- Before use, please confirm that the rated voltage of the product is consistent with the power supply voltage of your home (usually 50-240V) to avoid product damage or safety accidents caused by voltage mismatch.
- Please use an independent socket that meets national standards. Avoid using inferior sockets, power strips, or sharing a socket with other high-power electrical appliances to prevent fire caused by overload or short circuit.
- When the product is in use, it should be placed in a stable, dry and well-ventilated environment, away from water sources, fire sources, high-temperature heat sources, and flammable and explosive items, and avoid direct sunlight.
- Do not touch the product's power plug, switch, and live parts with wet hands to avoid electric shock risk. Before cleaning the product, please be sure to unplug the power plug and wait for the product to cool down.
- If the product malfunctions (such as abnormal noise, peculiar smell, smoke, water leakage, etc.), please immediately unplug the power plug, stop using it, do not disassemble or repair it by yourself, and contact professional after-sales service personnel for handling.
- When children, the elderly, and people with reduced mobility use this product, they must be under the supervision of adults to prevent dangers caused by incorrect operation; please place the product and power plug out of the reach of children.
- When the product is not in use for a long time, please unplug the power plug, clean the dirt on the surface and inside of the product, and store it properly in a dry and well-ventilated place to avoid product damage caused by moisture and dust.
- Do not use the product for purposes other than those specified in the manual, and do not modify or alter the product at will, otherwise it may cause safety hazards and product damage, and it will not be covered by the warranty.
2. Special Safety Tips for Hair Clippers
- Rotating Parts: Do not put your hands, clothes, or other objects into the rotating blade area when the clipper is running to avoid injury. After use, ensure the blades are completely stationary before handling or cleaning.
- Waterproof and Moisture-proof: While this appliance may have some waterproof performance, do not soak it in water for a long time to avoid water entering the interior and causing short circuit or electric shock. When cleaning, please wipe gently with a damp cloth; do not rinse directly with water.
- Battery-powered: This device uses a rechargeable battery. Do not attempt to disassemble or short-circuit the battery to avoid leakage or explosion. After the battery is exhausted and the product reaches its end of life, please dispose of it in accordance with environmental protection requirements; do not discard it with general waste.
Product Introduction
1. Product Composition
The HOMEFISH YXY-26011415 Hair Clipper & Beard Trimmer typically includes the following components:
- Main Unit (Hair Clipper) with intelligent digital display
- Multiple Guide Combs (for various cutting lengths)
- Cleaning Brush
- USB Charging Cable
- User Manual
Please check all accessories after unpacking. If any are missing or damaged, please contact the dealer or after-sales service immediately.
2. Product Features
- Energy-efficient: Adopts high-quality core components, with low energy consumption and high efficiency.
- Easy to operate: Simple and easy-to-understand operation, with clear functions.
- Safe and reliable: Built-in multiple safety devices such as overload protection and short-circuit protection.
- Durable and easy to clean: The shell is made of high-temperature resistant, corrosion-resistant, and easy-to-clean material. The guide combs are detachable for convenient cleaning.
- Intelligent Digital Display: Shows battery percentage and other relevant information.
- Pitch Adjustment: Allows for fine-tuning of cutting length.
- High Performance Motor: Ensures efficient and smooth cutting.
Specifications
| Attribute | Value |
|---|---|
| Model | YXY-26011415 |
| Item Type | Razor (Hair Clipper & Beard Trimmer) |
| Power Type | Rechargeable (Electric) |
| Is Batteries Included | Yes |
| Material | ABS |
| Gender | Men |
| Origin | Mainland China |
| High-concerned chemical | None |
Package Dimensions & Weight
- Length: 20 cm
- Width: 8 cm
- Height: 5 cm
- Weight: 0.262 kg
Setup
Preparation Before Use
- Inspect the Product: Check whether the appearance of the product is intact, and whether there are any abnormalities such as damage, deformation, or liquid leakage. Verify that the USB charging cable is intact and free from damage or breakage.
- Placement: Place the hair clipper in a stable, dry, and well-ventilated position, ensuring there are no obstacles around. Keep it away from water sources, fire sources, and high-temperature areas.
- Charging: Before first use, fully charge the hair clipper using the provided USB cable. Connect the USB cable to a standard USB power adapter (not included) and then to the clipper's charging port. The intelligent digital display will show the charging progress.
- Initial Preparation: Attach the desired guide comb for your intended hair length. Ensure it is securely fastened.
Operating Instructions
Basic Operation Steps
- Power On: Press the "Power" button on the hair clipper. The intelligent digital display will turn on, showing the battery percentage.
- Select Cutting Length: Attach the appropriate guide comb for your desired hair length. Use the pitch adjustment lever on the side of the clipper to fine-tune the blade position for precise cutting.
- Begin Trimming: Gently guide the clipper against the direction of hair growth. For best results, ensure hair is clean and dry.
- Power Off: After use, press the "Power" button again. The display will turn off, and the clipper will stop running.
Usage Scenarios
Maintenance
1. Daily Maintenance
- Regularly check whether the USB charging cable is intact. If there is damage or aging, contact after-sales service to replace it; do not attempt to repair it yourself.
- Regularly check the functional parts, especially the blades and guide combs. If there is blockage, wear, or looseness, clean or fasten them in time. If the issue cannot be resolved, contact professional personnel for handling.
- When not in use for a long time, clean the product thoroughly, wipe off any moisture, and store it in a dry, well-ventilated, and cool place to avoid moisture and dust accumulation.
- Avoid strong impact and extrusion on the product to prevent damage to the shell and internal parts.
2. Cleaning Methods
- Safety First: Before cleaning, be sure to unplug the USB charging cable and ensure the clipper is turned off and cool to avoid electric shock or injury.
- Shell Cleaning: Wipe the product shell gently with a soft damp cloth to remove surface dust and stains. If stains are stubborn, you can use a small amount of neutral detergent (such as dish soap) to wipe, then wipe dry with a dry cloth. Do not rinse the shell directly with water.
- Functional Parts Cleaning: Detachable parts, such as guide combs, can be removed and rinsed with clean water, or cleaned with the provided brush, then wiped dry before reinstalling. For the blades, use the cleaning brush to remove trapped hairs. You may apply a small amount of clipper oil (not included) to the blades after cleaning for optimal performance and longevity.
- Drying: After cleaning, ensure that all parts of the product are completely dry before plugging in the power to charge or use, to avoid short circuits caused by moisture.
Note: Do not use hard brushes, steel wool, or corrosive cleaners (such as alcohol, bleach) to clean the product, so as not to damage the product surface and internal parts.
Troubleshooting
| Common Faults | Possible Causes | Solutions |
|---|---|---|
| The product cannot be turned on |
|
|
| Abnormal noise during product operation |
|
|
| Product shuts down automatically |
|
|
User Tips
- The clipper offers excellent battery life, often showing high percentages even after extended use.
- The fine adjustment feature (pitch adjustment lever) is very useful for achieving precise cutting lengths and fades.
- This clipper is versatile and works well for both head hair and beard trimming.
- Users often inquire about the smallest hair size this machine can cut, indicating a desire for precision. While specific measurements are not provided, the pitch adjustment allows for close cuts.
Warranty & Support
Disclaimer
- The company shall not be liable for any faults or safety accidents caused by failure to operate in accordance with this manual, man-made damage, self-disassembly, or modification of the product.
- The company shall not be liable for product damage or faults caused by force majeure (such as earthquake, flood, lightning strike, voltage abnormality).
- The content of this manual is for reference only. The product functions and parameters may vary slightly according to batches and models, and the actual product shall prevail. The company reserves the right to modify the content of the manual without prior notice.
For further assistance or if you have questions not covered in this manual, please contact our after-sales service. You can also refer to the full user manual PDF for general electrical appliances (View User Manual PDF).
Thank you for your trust and support! Wish you a pleasant use!
Product Model: YXY-26011415