1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your JONSBO NAS Chassis (N3, N4, N5, N6 series). Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation. Keep this manual for future reference.

Figure 1.1: JONSBO NAS Chassis Series (N3, N4, N5, N6)
2. Safety Information
- Always disconnect the power cord from the wall outlet before installing or removing any components.
- Wear an anti-static wrist strap or discharge static electricity by touching a grounded metal object before handling internal components.
- Keep the chassis away from water, moisture, and direct sunlight.
- Ensure proper ventilation around the chassis to prevent overheating.
- Do not open the power supply unit; it contains high voltage components.
- Use only specified power cables and accessories.
3. Package Contents
Please check the package contents against the list below. If any item is missing or damaged, contact your retailer.
| Item | Description | Quantity |
|---|---|---|
| A | Screws (Motherboard, Power Supply, Bracket) | 20 |
| B | 3.5" HDD Screws | 37 |
| C | 2.5" SSD Hard Drive Screws | 37 |
| D | Fan Screws | 12 |
| E | Standoffs | 1 |
| F | HEX Wrench Socket | 1 |
| G | Gaskets | 10 |
| H | Cable Ties | 5 |
| I | Power Adapter Cable | 1 |
| J | Power Adapter Screws | 3 |
| K | Spare Plastic Buckle | 1 |
| L | Spare Screws for Plastic Buckles | 2 |
| M | Rear Fan Bracket | 1 |
| N | Lower Power Supply Rack | 1 |
| O | Front Power Rack | 1 |
4. Specifications
Below are the detailed specifications for the JONSBO NAS Chassis series. Please refer to the specific model you have purchased.
4.1 JONSBO N3 Specifications

Figure 4.1: JONSBO N3 Chassis Parameters
| Feature | Specification |
|---|---|
| Product Size | 233mm (W) * 262mm (D) * 298mm (H) |
| Material | 2.0mm aluminum alloy / 1mm steel plate |
| Hard Drive Bays | 2.5" SSD * 1 / 3.5" HDD * 8 |
| Compatible Motherboard | ITX |
| PCI Expansion Slot | 2 slots |
| Front Ports | 1*USB3.0 / 1*USB3.2 Gen 2 Type-C / Audio+Mic (2-in-1) |
| Power Supply | SFX ≤ 105mm |
| CPU Cooler Support | ≤ 130mm |
| GPU Support | ≤ 250mm |
| Cooling System | HDD Compartment: 100*25mm*2 (Standard), Motherboard Compartment: 80*25mm*2 (Optional) |
| Weight | 3.9 KG |
4.2 JONSBO N4 Specifications

Figure 4.2: JONSBO N4 Black Specifications
| Feature | Specification |
|---|---|
| Product Size | 286mm (W) * 300mm (D) * 228mm (H) |
| Material | 0.7SGCC steel plate + Dark walnut wood hard |
| Hard Disk Space | 2.5" SSD * 2 / 3.5" HDD * 6 |
| Compatible Motherboard | ITX / M-ATX |
| PCI Expansion Slot | 4 slots |
| Front Interface | Type-C * 1 / USB3.0 * 1 |
| Power Supply | SFX ≤ 125mm |
| CPU Cooler Support | ≤ 70mm |
| Video Card Support Length | ≤ 230mm |
| Cooling System | 120mm * 1 (built-in) |
| Weight | 3.75 KG |
4.3 JONSBO N5 Specifications

Figure 4.3: JONSBO N5 Specifications
| Feature | Specification |
|---|---|
| Product Size | 355mm (W) * 403mm (D) * 350mm (H) |
| Material | 1mm steel plate, 2mm aluminium plate, 8mm North American walnut wood |
| Hard Drive Bays | 2.5" SSD * 2 or 2.5" SSD * 4 / 3.5" HDD * 12 |
| Compatible Motherboard | ITX / M-ATX / ATX / E-ATX |
| PCI Expansion Slot | 8 slots |
| Front Ports | USB3.2 Gen 2 Type-C * 1 / USB3.0 * 1 (AUDIOx1 + MICx1 2-in-1) |
| Power Supply | ATX ≤ 170mm - 240mm |
| CPU Cooler Support | ≤ 160mm |
| GPU Support | ≤ 325mm - 350mm |
| Cooling System | Front panel 120mm * 2 or 140mm * 2, Right side 120mm * 3 (fan will occupy 8th graphics slot), Rear panel 120mm * 3 (standard), Left side 120mm * 3 |
| Water Cooling Support | 240mm / 280mm |
| Weight | 7.5kg |
4.4 JONSBO N6 Specifications

Figure 4.4: JONSBO N6 Specifications
| Feature | Specification |
|---|---|
| Color | Black |
| Dimension | 305mm (W) * 353mm (D) * 318mm (H) (Includes 6mm tall base) |
| Material | 0.7mm + 1.0mm Steel |
| Drive Bay | 2.5" SSD * 9 / 3.5" HDD * 9 |
| Motherboard | ITX / M-ATX |
| PCI Expansion Slot | 4 |
| Front I/O Port | Type-C * 1 / USB3.0 * 1 / 1AUDIO * 1 + MIC * 1 (Headset + mic combined) |
| PSU Support | ATX ≤ 220mm / FSX ≤ 100mm |
| Max. CPU Cooler Height | ≤ 65mm - 160mm |
| Max. Display Card Length | ≤ 275mm - 320mm |
| Fan | Front 120mm * 2 or 140mm * 2, Left 120mm * 2, Right 120mm * 2, Rear 120mm * 1, Drive Bay 120mm * 2 |
| Weight | Net 7.5kg |
5. Setup and Installation
Follow these steps carefully to assemble your JONSBO NAS Chassis.
5.1 Parts Diagram
Familiarize yourself with the chassis components using the diagram below:

Figure 5.1: Chassis Parts Diagram
- Top cover
- ATX power supply bracket
- Power supply bracket
- Front power rack
- Front mesh panel
- Hard drive tray
- Plastic panel
- Bottom cover
- Bottom fan bracket
- PCIE cover
- PCIE card strip
5.2 Removing Top Cover and Front Panel
Before installing hardware, you need to remove the top cover and front panel.
5.2.1 Remove Top Cover
- Unscrew the top cover screws.
- Push the top cover back to remove it.
5.2.2 Remove Front Panel
- Locate the opening notch on the top of the front mesh plate. Open the front mesh plate from this notch.
- There are opening notches on both sides of the plastic panel. Open the panel from these notches.
5.3 Motherboard Installation
- Place the motherboard in the designated area inside the chassis.
- Secure it with the appropriate screws.
5.4 Power Supply Installation
The chassis supports various power supply configurations depending on the model (SFX, ATX, or dual power supplies).
5.4.1 General Power Supply Installation
- Place the power supply in the designated area.
- Lock it with screws.
5.4.2 Front Power Supply Installation (SFX)
- Remove the power supply bracket and replace it with the rear fan bracket.
- Use a screwdriver to remove the rear fan bracket.
- Secure the power adapter cable to the rear fan bracket with screws.
- Fix the SFX power supply to the front power supply bracket with screws.
- Install the assembled SFX power supply back into the chassis and tighten the screws.
5.4.3 Bottom Power Supply Installation
- Remove the left fan bracket.
- Install the SFX power supply on the power supply rack below.
- Install the assembled power supply rack back into the chassis.
5.4.4 Dual Power Supply Installation (N6)
The N6 model supports dual power supply installation and independent power supply for the hard disk backplane. You can combine ATX+SFX or SFX+SFX power supplies.
5.4.5 Power Supply Bracket Adjustment
- The power supply bracket is fixed on the right side.
- Adjust the bracket distance to properly support the power supply unit.
5.5 Cable Organization
Proper cable management ensures better airflow and a cleaner build.
- Arrange the CPU power supply and hard disk power supply cables in the holes of area A.
- Arrange the fan cables and hard drive data cables in the holes of area B.
5.6 Graphics Card Installation
- Remove the PCIE cover and the PCIE card strip.
- Insert the graphics card into the motherboard slot.
- Lock it with screws.
5.7 Hard Disk Backplane Power Supply Connection
- Unscrew the four screws on the fan bracket and remove the fan bracket.
- Plug in the power supply as shown in the diagram.
- Power Supply Precaution: It is recommended to fully plug in all four power supply heads, and connect a single power cord to only one power supply port.
5.8 Fan Installation
The chassis supports various fan configurations for optimal cooling:
- Front panel: 120mm x 2 or 140mm x 2 fans (240mm radiator)
- Left side: 120mm x 2 fans
- Right side: 120mm x 2 fans
- Rear: 120mm x 1 fan
5.9 Hard Drive Installation
- Remove the hard drive bracket and tighten the screws according to the markings on the hard drive.
- Install the assembled hard drive cage back into the chassis.
5.10 Reinstall Top Cover and Fan Bracket
- Reinstall the top cover.
- Reinstall the fan bracket.
6. Operating Instructions
6.1 Powering On/Off
- Connect the power cable to the power supply unit and a wall outlet.
- Press the power button on the front panel to turn on the system.
- To turn off, perform a proper shutdown through your operating system, then press the power button if necessary.
6.2 Front Panel Functions
The front panel typically includes:
- Power Button
- USB Ports (USB3.0, USB3.2 Gen 2 Type-C)
- Audio Jacks (Headphone/Microphone combo)
- Drive Activity LEDs (depending on model)
- Fan Speed Switch (depending on model)
7. Maintenance
- Cleaning: Regularly clean the chassis exterior with a soft, dry cloth. Use compressed air to clear dust from fan vents and internal components. Ensure the system is powered off and unplugged before cleaning.
- Ventilation: Ensure all ventilation openings are clear and not obstructed to maintain optimal airflow and prevent overheating.
- Cable Management: Periodically check internal cables to ensure they are securely connected and not interfering with airflow.
8. Troubleshooting
8.1 System Does Not Power On
- Check if the power cable is securely connected to the power supply and the wall outlet.
- Ensure the power supply switch is in the 'ON' position.
- Verify that the front panel power button cable is correctly connected to the motherboard.
- Test the power supply with another system or a power supply tester if available.
8.2 Overheating Issues
- Ensure all case fans are spinning correctly.
- Check for dust buildup in fan filters and heatsinks; clean as necessary.
- Verify that the chassis has adequate clearance for airflow.
- Improve cable management to reduce obstructions to airflow.
8.3 Drive Not Detected
- Check if the SATA data and power cables are securely connected to the drive and motherboard/power supply.
- Ensure the hard drive backplane power supply is correctly connected.
- Verify drive settings in BIOS/UEFI.
9. User Tips
- Fan Noise: If fan noise is a concern, consider replacing the included fans with models that offer adjustable speed control (PWM fans) for quieter operation.
- Build Quality: Users have noted the thick iron plates and robust construction, indicating good overall build quality.
- Assembly: The chassis is generally considered easy to assemble, making it suitable for DIY enthusiasts.
- Packaging: The product is typically well-packaged, ensuring safe delivery.
10. Warranty and Support
Jonsbo products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Jonsbo website. Please retain your proof of purchase for warranty claims.