BMW Car LED Welcome Light Projector

Contents

BMW Car LED Welcome Light Projector User Manual

Model: Car LED Welcome Light Projector

1. Introduction

This manual provides instructions for the installation and use of the BMW Car LED Welcome Light Projector. This product is designed to project a decorative BMW logo or M Performance logo onto the ground when the car door is opened, enhancing the aesthetic appeal of your vehicle.

For additional information, you may refer to the User Manual (PDF).

2. Safety & Warnings

  • ATTENTION: Not suitable for children under 36 months.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow all installation and operation guidelines to avoid injury or damage to the vehicle.

3. Product Overview

The LED Welcome Light Projector features an ABS resin shell for fast heat dissipation and high temperature resistance, along with an HD lens composed of 4 layers to achieve clear and bright projection.

Product details showing the ABS resin shell and HD lens components.

Product details highlighting the ABS resin shell and HD lens.

Dimensions of the LED Welcome Light Projector: 68mm length, 24mm width.

Dimensions of the LED Welcome Light Projector (68mm x 24mm).

4. Installation Guide

The LED Welcome Light Projector is designed for direct installation, replacing your vehicle's existing door lights. Ensure you remove any protective films from the product before installation.

Step-by-Step Installation:

  1. Remove Original Door Lights: Use appropriate tools (e.g., a flathead screwdriver) to carefully pry out and remove the original door lights from their housing.
  2. Connect to Power Supply: Connect the wiring of the new LED Welcome Light Projector to the existing door light power supply. Ensure a secure connection.
  3. Insert New Light: Carefully insert the new LED Welcome Light Projector into the empty housing.
  4. Secure in Place: Push the new light firmly until it clicks into place, ensuring it is securely fastened within the door panel.
Four-step visual guide for easy installation of the car LED welcome light projector.

Visual guide for installing the LED Welcome Light Projector.

5. Operating Instructions

The LED Welcome Light Projector operates automatically. When a car door is opened, the projector will illuminate and display the chosen logo onto the ground. The light will turn off when the door is closed.

Demonstration Video:

Video demonstrating the installation process and various projected logos.

Projected Logos Examples:

Projected BMW Angel Wings logo on the ground.
BMW Angel Wings
Projected classic BMW logo on the ground.
Classic BMW Logo
Projected BMW 50th anniversary logo on the ground.
BMW 50th Anniversary Logo
Projected BMW M Performance logo on the ground.
BMW M Performance Logo

6. Maintenance

To ensure optimal performance and longevity of your LED Welcome Light Projector, follow these simple maintenance tips:

  • Cleaning: Periodically wipe the lens and exterior of the projector with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
  • Inspection: Regularly check the projector for any signs of damage or loose connections. If any issues are found, refer to the troubleshooting section or contact support.

7. Troubleshooting

If you encounter any issues with your LED Welcome Light Projector, please try the following steps:

  • Light Not Projecting:
    • Ensure the car door is fully open.
    • Check the electrical connection to the projector. Ensure it is securely plugged in.
    • Verify that the original door light was functioning correctly before replacement.
  • Dim or Blurry Projection:
    • Clean the projector lens with a soft, dry cloth.
    • Ensure the projector is correctly seated in its housing and not obstructed.
  • Inconsistent Operation:
    • Check for any loose wiring or connections.
    • Ensure the door sensor (if applicable) is functioning correctly.

If the problem persists after attempting these steps, please contact customer support.

8. Specifications

FeatureDetail
Product NameAutomobile LED Decorative Lamp (Welcome Light Projector)
BrandBMW (Compatible)
Item TypeWelcome Light
Voltage12 V
Shell MaterialABS Resin
Lens TypeHD Lens (4 layers)
Unit Dimensions (approx.)68mm (Length) x 24mm (Width)
Package Dimensions (approx.)18 cm (Length) x 14 cm (Width) x 5 cm (Height)
Package Weight (approx.)0.12 kg
OriginMainland China
High-concerned chemicalNone

Compatible BMW Models:

Image showing a list of compatible BMW 1, 2, 5, 6, 7 Series and X-series models with their production years.

List of compatible BMW models and series.

  • 1 Series: E81, E82, E87, E88, F20, F21 (2004-2018)
  • 2 Series: F22, F23, F44, F45, F46 (2014-2023)
  • 5 Series: G30, G31, G38 (2016-2023)
  • 6 Series: F06, F12, F13, G32 (2011-2024)
  • 7 Series: G11, G12 (2016-2023)
  • X-series: X1 E84, F48 (2009-2022); X2 F39 (2018-2023); X3 F25, G01, G08 (2011-2023); X4 F26, G02 (2014-2023); X5 F15, G05 (2013-2023); X6 F16, G06 (2014-2023)

9. User Tips

  • Verify Compatibility: Before purchasing or installing, it is crucial to check that your vehicle's original welcome lamp body is consistent with the design of this product. If you are unsure about applicability, consult with the seller or a professional.
  • Gentle Removal: When removing the original door lights, use a plastic pry tool or a thin, flat screwdriver wrapped in tape to avoid scratching your car's interior.
  • Test Before Securing: After connecting the new projector but before fully securing it, test the light by opening and closing the door to ensure it functions correctly and the projection is oriented as desired.

10. Warranty and Support

For any questions, technical support, or warranty claims, please contact the manufacturer or their authorized representative:

Manufacturer Information:

  • Company Name: Guangzhou zhouju trading co., ltd
  • Full Address: Room 103, No.70, Changyou West 1st Street, Tianhe District, Guangzhou City, Guangdong Province
  • Email: evkoil353@outlook.com

EU Authorized Representative:

  • Company Name: CONSULTING BUSINESS MANAGEMENT
  • Full Address: 39 Rue Cambronne, 75015 Paris, Île-de-France, France
  • Email: Noah Hernandez@waveecrest.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.