SONGGER ZMF-Series

Contents

SONGGER Mini Digital Push-Pull Force Gauge User Manual

Model: ZMF-Series

1. Product Overview

The SONGGER Mini Digital Push-Pull Force Gauge is a portable and compact dynamometer designed for precise tensile and compressive force measurement. It is suitable for a wide range of applications in laboratory, industrial, and field settings. This device features a high-contrast LCD display, multi-unit conversion capabilities, and selectable measurement modes to ensure accurate and reliable force testing. Its ergonomic design allows for convenient one-hand operation.

Front view of the SONGGER Mini Digital Push-Pull Force Gauge
Front view of the SONGGER Mini Digital Push-Pull Force Gauge, highlighting its compact size and LCD display.
Digital force gauge with various attachments including a hook, flat head, cone head, chisel head, V-head, and extension rod.
The force gauge comes with various attachments for different testing needs, such as hooks and various shaped heads.

2. Specifications

FeatureDescription
Product NameMini Push-Pull Force Gauge
BrandSONGGER
Power Supply2 x AAA batteries (3V DC)
Measurement Range10N - 500N (model dependent)
Accuracy±1% of full scale
Resolution0.01mm (Note: This resolution refers to displacement, not force. Force resolution varies by model, e.g., 0.1N or 0.01N.)
Reading UnitsN (Newton), Kg (Kilogram), Lb (Pound), Oz (Ounce)
DisplayBacklit LCD
Measurement ModesReal-time Mode, Peak Mode, Second Peak Mode
Alarm FunctionAudible buzzer for upper and lower limit setting
Overload IndicationDisplay warning when exceeding rated capacity
PackagingDrop-resistant Plastic Box
OriginMainland China
Table showing multiple force gauge models (ZMF-10N to ZMF-500N) and a summary of product specifications.
Overview of various ZMF-Series models and their general specifications.

3. Setup

  1. Inspect Device: Ensure the force gauge is intact and free from any visible damage.
  2. Install Batteries: Open the battery compartment on the back of the device. Install two AAA batteries, ensuring correct polarity. Note: Batteries are not included in some shipments due to restrictions.
  3. Attach Fixture: Securely attach the appropriate test hook or fixture to the force sensor shaft at the top of the device.
  4. Power On: Press the power key (red button with power symbol) to turn on the device.
Back view of the force gauge showing the battery compartment and a close-up of the buzzer.
Locate the battery compartment on the back of the device for battery installation.

4. Operating Instructions

Button Functions

Diagram showing the digital force gauge with labels for its buttons: SET (Menu Button), ZERO (Zero Button), PEAK (Mode Button), UNIT (Unit Button), and Power Button.
Overview of the force gauge buttons and their functions.
  • Power Button (Red): Turns the device on or off.
  • UNIT Button: Selects the desired measurement unit (N, Kg, Lb, Oz).
  • PEAK Button (Mode Button): Cycles through measurement modes (Real-time, Peak, Second Peak).
  • SET Button (Menu Button): Used to access settings, such as alarm limits.
  • ZERO Button: Resets the display to zero before a new measurement.

Measurement Modes

Digital force gauge displaying 'Real-time Mode', 'Peak Value Mode', and 'Second Peak Value Mode' on its LCD screen, with an arrow indicating push-pull direction.
The three freely switchable measurement modes: Real-time, Peak Value, and Second Peak Value.
  • Real-time Mode: Displays instantaneous force values. The screen does not show "P" or "T".
  • Peak Mode: Records and displays the maximum force value achieved during a measurement period. The screen shows "P" only.
  • Second Peak Mode: Captures and displays a secondary peak force value, useful for specific test scenarios. The screen shows both "P" and "T".

Performing a Measurement

  1. Select Unit: Press the UNIT key to choose your desired measurement unit (N, Kg, Lb, or Oz).
  2. Select Mode: Press the PEAK key to select the appropriate measurement mode for your application.
  3. Set Alarm Limits (Optional): If needed, use the SET button to configure upper and lower alarm limits. An audible buzzer will sound if these limits are exceeded.
  4. Zero Display: Press the ZERO key to reset the display to 0.0 before starting a new measurement.
  5. Apply Force: Apply force gradually and consistently along the axial direction of the force sensor shaft. Avoid sudden impacts or lateral/bending forces, as this can lead to inaccurate readings or damage.
  6. Read Value: Read the force value directly from the LCD display.
Close-up of the digital force gauge's LCD display showing 'N 0.0' and battery indicator.
The clear LCD display provides intuitive and easy-to-read measurements.
Digital force gauge showing unit conversion from N to kg, lb, oz.
The device supports four measurement units: N, Kg, Lb, and Oz, with conversion factors shown.
Digital force gauge with a visual representation of sound waves indicating the buzzer alarm function.
The built-in buzzer alarm activates when preset force limits are exceeded.

5. Precautions and Safety Warnings

  • Load Limits: Do not exceed the maximum rated load of your specific model to prevent sensor damage and ensure user safety. Overloading can cause sudden mechanical failure and personal injury.
  • Force Application: Always apply force strictly along the measurement axis. Lateral or bending forces can lead to inaccurate readings and permanent damage to the device.
  • Environmental Conditions: Do not use the device in high humidity, corrosive, or explosive environments.
  • Temperature: Operate within the recommended temperature range (typically 0°C to 40°C).
  • Battery Handling: Install batteries correctly to avoid leakage or overheating. Remove batteries if the device will not be used for an extended period. Use only appropriate AAA batteries and do not mix old and new batteries.
  • Child Safety: Keep the device out of reach of children.
  • Intended Use: This instrument is designed for force measurement only. Do not use it as a load-bearing or lifting device.
  • Attachments: Ensure all attachments are securely fastened before applying force.
  • Disposal: Follow WEEE directives for electronic waste. Dispose of used batteries in accordance with local regulations and the EU Battery Directive.

6. Maintenance

  • Storage: Store the instrument in a dry, dust-free environment when not in use.
  • Handling: Avoid mechanical shock, vibration, and heavy impact to prevent damage.
  • Cleaning: Clean the housing with a soft, slightly damp cloth. Do not use aggressive solvents or abrasive cleaners.
  • Calibration: Periodically verify calibration according to internal quality procedures or applicable industry standards to maintain accuracy.

7. Troubleshooting

  • Device Not Powering On: Check if batteries are installed correctly with the right polarity. Ensure batteries are fresh; replace if necessary.
  • Inaccurate Readings: Ensure force is applied axially without lateral or bending forces. Verify that the correct measurement unit and mode are selected. Check if the device has been overloaded, indicated by a display warning.
  • No Alarm Sound: Check if alarm limits are properly set in the device's settings.
  • Display Warning: If the display shows a warning, it indicates that the rated capacity has been exceeded. Reduce the applied force immediately to prevent damage.

8. User Tips

  • Versatile Use: This force gauge is designed to accurately measure both push (compression) and pull (tension) forces, making it highly versatile for various applications.
  • Battery Life: With regular use, two AAA batteries can power the device for several weeks. Always have spare batteries on hand for uninterrupted work.
  • Custom Alerts: Utilize the alarm function by setting upper and lower force thresholds. This provides an audible alert when limits are exceeded, enhancing safety and control during testing.
  • Comfortable Operation: The ergonomic design ensures a comfortable grip, allowing for extended periods of one-hand operation without fatigue.

9. Frequently Asked Questions (FAQ)

Q1: Does this force gauge support both push and pull testing?
A1: Yes, it is designed to accurately measure both push and pull forces.
Q2: How long do the batteries last?
A2: With regular use, 2 AAA batteries can power the device for several weeks.
Q3: Can I set custom force limits for alerts?
A3: Yes, you can set upper and lower force thresholds, and the built-in alarm will sound when these limits are exceeded.

10. Warranty and Support

This document is provided for product instruction purposes only and does not constitute legal advice. The seller is responsible for ensuring compliance with destination market regulations.

For technical assistance, warranty inquiries, or any other support needs, please contact the seller directly using the information below:

Contact information for support, including WhatsApp and Email.
Contact information for technical support and inquiries.
  • WhatsApp: +86 13311678550
  • Email: miazhao008@gmail.com
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.