8520 Mini Coreless Motor 8520 Mini Coreless Motor

Contents

8520 CW+CCW Mini Coreless Motor Instruction Manual

For DIY RC Drone and Quadcopter Applications

1. Introduction

This manual provides essential instructions for the safe and effective use of your 8520 CW+CCW Mini Coreless Motors. These high-speed micro hollow cup engines are designed for various DIY RC drone and quadcopter projects, offering lightweight and powerful performance. Please read this manual thoroughly before installation and operation, and keep it for future reference.

Two 8520 CW+CCW Mini Coreless Motors with red/blue and black/white wires
Figure 1: Pair of 8520 CW+CCW Mini Coreless Motors

2. Safety Warnings and Precautions

WARNING: Read all instructions carefully before using this product. Keep this manual for future reference.

  • Do not use the product for any purpose other than its intended use. Misuse may cause injury, damage to the product, or other hazards.
  • Keep this product out of the reach of children under 3 years, unless under direct adult supervision. Small parts may cause a choking hazard.
  • Do not disassemble, modify, or repair the product by yourself. Improper operation may cause electric shock, fire, or product failure. Contact professional maintenance personnel if needed.
  • Dispose of the product and its packaging in accordance with EU WEEE (Waste Electrical and Electronic Equipment) Directive 2012/19/EU and RoHS Directive 2011/65/EU. Do not discard as household waste.
  • Not suitable for children under 36 months. Contains small parts that may cause choking hazard. Use under adult supervision.
  • Do not use the product near water or in humid environments. Avoid contact with liquids to prevent electric shock. Unplug the power supply when not in use or during cleaning.
  • Protective equipment should be worn during operation.
  • This product requires high skills to avoid falls or collisions in its application (e.g., drone operation).
  • Contains substances that may cause irritation if misused. Follow the instructions strictly.

3. Product Features

  • Lightweight Design: Each motor weighs only 5 grams, minimizing added weight to your drone for optimal flight performance.
  • Powerful Output: Provides significant boost for maneuverability and agile movements, handling various flying conditions with ease.
  • Integrated Heat Dissipation: Built-in system enhances cooling efficiency, ensuring optimal performance without overheating and improving longevity.
  • Wide Operating Voltage Range: Functions under 3-5V, offering versatility in speed control to meet specific flight requirements.
  • Compact Size: Rear diameter of 12mm and output shaft length of 5mm, compatible with a wide range of drone frames and propellers.
  • Multi-functional Design: Suitable for various scenarios and capable of meeting diverse user needs.
  • User-Friendly Operation: Intuitive design, suitable for users of all experience levels.
  • Energy-Efficient Performance: Low-power operation helps conserve electrical energy.

4. Specifications

Attribute Value
Item Type Engine
Single Motor Diameter 8.5 mm
Single Motor Length 20 mm
Single Output Shaft Diameter 1.2 mm
Single Output Shaft Length 5 mm
Tail Ring 12 cm
Individual Weight 5 g
Voltage DC 3-5V
Current 0.15A
Spinning Speed (3V) 35000-37000 rpm
Spinning Speed (5V) 50000 rpm
Origin Mainland China
Certification CE
Front view of two coreless motors showing output shafts
Figure 2: Front view of motors with output shafts

5. Installation and Setup

5.1. Unpacking Inspection

  • After opening the package, verify that the product is complete and undamaged.
  • Ensure all components listed in the package contents are present.

5.2. Motor Installation

  • Correctly install product components following the steps outlined in your specific drone or quadcopter assembly manual.
  • Ensure motors are securely mounted to the frame.

5.3. Wiring Instructions

  • The motors come with two types of wire color combinations for CW (Clockwise) and CCW (Counter-Clockwise) rotation.
  • Forward Rotation (CW): Connect the motor with black and white lines. White is positive (+), and black is negative (-).
  • Reverse Rotation (CCW): Connect the motor with red and blue lines. Red is positive (+), and blue is negative (-).
  • Ensure correct polarity to prevent damage to the motors or flight controller.
Close-up of two coreless motors, one with red/blue wires for CCW and one with black/white wires for CW
Figure 3: Motors showing wire color coding for rotation direction
Single coreless motor with red and blue wires for CCW rotation
Figure 4: Single motor with red/blue wires (CCW)
Single coreless motor with black and white wires for CW rotation
Figure 5: Single motor with black/white wires (CW)

6. Operation

  • Power on the device (drone/quadcopter) and operate it according to the instructions provided by your flight controller or drone manual.
  • The motors are designed for DC 3-5V operation. Ensure your power source is within this range.
  • Monitor motor performance during initial flights to ensure proper function and temperature.
Two coreless motors with wires, superimposed on a background of a drone in flight, illustrating application
Figure 6: Motors in a drone application context

7. Maintenance

7.1. Cleaning and Maintenance

  • Wipe off surface dust or stains promptly after use with a soft, dry cloth.
  • Do not use liquids or harsh chemicals for cleaning.

7.2. Storage Method

  • When not in use, store the product in a dry, well-ventilated location.
  • Avoid extreme temperatures and high humidity.

8. Troubleshooting

If you encounter issues with your motors, consider the following general troubleshooting steps:

  • Motor Not Spinning: Check all wiring connections for proper polarity and secure contact. Ensure the power source is providing the correct voltage (3-5V).
  • Weak Performance: Verify the power supply is adequate and not under-volting. Inspect for any obstructions around the motor shaft or propeller.
  • Excessive Heat: Ensure proper ventilation around the motors. Reduce continuous high-load operation if overheating persists.
  • Unusual Noise: Check for loose components, debris, or damage to the motor casing or shaft.

For complex issues, consult with experienced RC hobbyists or professional technicians.

9. User Tips

No specific user tips from reviews or Q&A are available at this time. However, general advice for coreless motors includes:

  • Always test motors at low throttle first after installation.
  • Ensure propellers are balanced to reduce vibration and extend motor life.
  • Avoid prolonged operation at maximum throttle to prevent premature wear.

10. Warranty and Support

For information regarding warranty, returns, or technical support, please refer to the seller's policies or contact the point of purchase. A user manual in PDF format may also be available for download: View User Manual (PDF).

11. Package Contents

  • 2 x 8520 Mini Coreless Motors (1 CW, 1 CCW)

© 2023 All Rights Reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.