1. Introduction
The Xiaomi BE5000 WiFi 7 Router is a high-performance wireless router designed to provide fast and stable internet connectivity. Featuring WiFi 7 technology, it offers higher throughput, dual-band aggregation, and a 2.5G network port for optimal home network performance.
Figure 1: Xiaomi BE5000 WiFi 7 Router
2. Package Contents
Please check the box for the following items:
Figure 2: Package Contents
- Xiaomi BE5000 Router
- Instruction Manual
- Network Cable
- Power Adapter
3. Product Overview
3.1. Ports and Buttons
Figure 3: Router Ports and Buttons
| Serial Number | Name | Use |
|---|---|---|
| 1 | Power port | For connecting the power adapter |
| 2 | RESET button | Used to restore router factory settings (press and hold for 5 seconds) |
| 3 | 1G network port | A network port with a maximum rate of 1 Gbps that can be used as a WAN or LAN port (automatic identification) |
| 4 | 2.5G network port | A network port with a maximum rate of 2.5 Gbps, available as a WAN port or LAN port (automatic identification) |
| 5 | MESH button | Used to network with routers that support the Xiaomi Mesh feature |
3.2. Indicator Light Status Description
| Indicator Light Status | Description |
|---|---|
| Extinguish | Off state or not connected to power |
| Steady orange | The system is starting up or the network is abnormal |
| Orange Breathing | Boot complete, system to be configured |
| Blinking orange | The Mesh is being connected to the main router or the system is being upgraded |
| Steady blue | Normal operation |
| Blue Breath | Found configurable sub-router, flicker for 2 minutes will automatically restore the steady indicator |
| Blinking blue | A lower-level node is being connected |
4. Setup Guide
4.1. Connecting the Network Cable
- Power on the router by connecting the power adapter to the power port and plugging it into an electrical outlet.
- Connect one end of the Ethernet cable to any network port on the router.
- Connect the other end of the Ethernet cable to your wall socket or the LAN port of your Optical Network Terminal (ONT) / broadband modem.
4.2. Initial Internet Access Setup
- Connect to Wi-Fi: On your mobile phone or computer, search for the Wi-Fi network name (SSID) printed on the label at the bottom of the router. Connect to this network (no password required initially).
- Access Setup Page: Your device should automatically redirect to the internet access guide page. If not, open a web browser and enter
miwifi.comin the address bar. - Enter Broadband Account: On the setup page, enter the broadband account and password provided by your internet service provider. Click 'Next'. (This step may be skipped depending on your internet access method.)
- Set Wi-Fi and Management Password: Create a new Wi-Fi password and a management password for the router. You can choose to use the same password for both.
- The router's Wi-Fi module will restart after configuration. You may need to search for and connect to the Wi-Fi network again.
4.3. IPv6 Setup Guide
- Open a web browser and enter
miwifi.com. Log in with your router management password. - Navigate to Common Settings > Internet Settings.
- Enable IPv6 and IPv6 Firewall.
- Follow the on-screen instructions to select the required working mode and complete the settings.
4.4. Mi Home APP Management
For a better management experience, download and use the Mi Home APP.
- Connect your mobile phone to the router's Wi-Fi network.
- Open the Mi Home app and log in with your Xiaomi account.
- The app should automatically detect the new router. Follow the prompts to bind the router to your account.
4.5. Xiaomi Mesh Networking
To extend your network coverage, you can set up a Mesh network with other Xiaomi Mesh-compatible routers.
Method 1: Networking via Mi Home APP
- Open the Mi Home APP.
- Navigate to the