LAUNCH X431 SmartLink C 2.0 HD

Contents

LAUNCH X431 SmartLink C 2.0 HD Heavy Duty Truck Diagnostic Tool User Manual

Model: X431 SmartLink C 2.0 HD

1. Introduction

The LAUNCH X431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module designed to enhance the capabilities of LAUNCH X431 diagnostic tools. It operates on a Linux system with a dual-processor architecture (Cortex-A7+Cortex-M7) and supports various communication methods including Bluetooth, Wi-Fi, and USB. This device is specifically engineered to extend vehicle coverage and diagnostic functions for heavy-duty vehicles.

It is compatible with LAUNCH X431 PAD V, PAD VII, PRO5, PRO3 V+ ELITE, PRO3S+ ELITE, X431 PRO TT, X431 PRO V5.0, X431 PRO DYNO, and X431 PROS (V 5.0) series diagnostic tablets. The SmartLink C 2.0 supports full system fault diagnosis, including code reading, code clearing, data stream reading, special functions, and action tests. It covers a wide range of vehicle types such as trucks, buses, construction machinery, agricultural machinery, trailers, and ships.

Key features include support for CANFD & DOIP protocols without the need for additional connectors, and an IP65 waterproof and dustproof shell with industrial shockproof design for durability in demanding workshop environments.

2. Package Contents

2.1. Unboxing

The following video demonstrates the unboxing process and contents of the X-431 SmartLink C Heavy-Duty Diagnostic Module.

Video: X-431 SmartLink C Heavy-Duty Diagnostic Module Unboxing

2.2. Standard Accessories

The package typically includes the following items. Please check against the packing list provided with your tool.

  • SmartLink C V2.0 Dongle (main diagnostic module)
  • DB15F to HD15F Data Cable
  • OBD II Adaptor
  • Data Cable (for VCI to diagnostic tool connection)
  • Password Envelope (containing Product S/N and Activation Code)
  • Quick Start Guide (Multilingual)
  • Cigarette Lighter Cable
  • Battery Clamps Cable
  • Crossover Cable (for firmware updates)
  • Electric Control Adaptor Wire
  • Various Adaptor Cables (e.g., CAT 9, IVECO 38, MAN 12, OBD 6, Type II OBD 9, MAN 37, BENZ 14, RENAULT 12, VOLVO 8, OBD 16, IVECO 30)
  • 15m Gigabit Networking Cable
  • USB Type A to Type B Cable
  • JUMPER 10
  • HYUNDAI 16 Adaptor
  • MITSUBISHI 12+16 Adaptor
  • Leighter Fuse *6
  • Electrically Controlled Switching Lines *9
  • Double Clamp Power Line
Image showing the full set of LAUNCH X431 SmartLink C accessories including the main unit, various diagnostic cables, power cables, and adaptors.

Figure: Full set of LAUNCH X431 SmartLink C accessories.

Image showing the LAUNCH X431 SmartLink C HD LITE packing list, including the main unit, OBDII 16 test connector, 15m Gigabit Networking Cable, USB cable, Jumper 10, Hyundai 16, Mitsubishi 12+16, Cigarette lighter line, Double Clamp power line, Electrically Controlled Switching line, and various integrated diagnostic connectors like CAT 9, IVECO 38, MAN 12, OBD 6, Type II OBD 9, MAN 37, BENZ 14, RENAULT 12, VOLVO 8, OBD 16, IVECO 30.

Figure: LAUNCH X431 SmartLink C HD LITE Packing List.

3. Device Overview

3.1. Components & Controls

The SmartLink C V2.0 dongle serves as a Vehicle Communication Interface (VCI) for heavy-duty, medium-duty, and light-duty vehicles. It expands the diagnostic capabilities of compatible LAUNCH diagnostic tools.

  1. DB-15 Diagnostic Connector: Used to connect the diagnostic cable.
  2. 3.97 Inch Touch Screen: Provides a visual interface for operation.
  3. DC-IN Port: For external power supply. Generally, the VCI dongle receives power from the vehicle's DLC via the DB-15 diagnostic connector. Only use the DC-IN port for external power if the DLC pin is damaged or provides insufficient power.
  4. LAN/WAN Port: Used to connect a crossover cable for firmware updates.
  5. Data I/O Port: Connects the VCI dongle to the diagnostic tablet to perform vehicle diagnosis.
Diagram showing the SmartLink C 2.0 module with labels for its ports: DB-15 Diagnostic Connector, 3.97 Inch Touch Screen, DC-IN Port, LAN/WAN Port, and Data I/O Port.

Figure: SmartLink C V2.0 Dongle Components.

4. Setup and Activation

4.1. Initial Setup and Software Download

Before starting, ensure your diagnostic tool is connected to the internet.

  1. Launch the diagnostic application on your compatible LAUNCH tablet.
  2. Navigate to Profile/User Info (the exact path may vary depending on the diagnostic tool).
  3. Select Activate VCI.
  4. Enter the 12-digit Product Serial Number (starting with 98) and the 8-digit Activation Code found in the Password Envelope.
  5. Tap Activate.
  6. Proceed to the update center to download and install the necessary diagnostic software.

Once activated, a new "HD / Heavy-duty" tab will appear on the diagnostic main menu screen. The wireless communication between the tablet and the VCI device is automatically established after successful registration.

5. Operation

5.1. Connecting to a Vehicle

Follow these steps to connect the SmartLink C 2.0 to a vehicle for diagnosis:

  1. Ensure the vehicle's ignition is turned off and the battery voltage is within the 9-36V range.
  2. Locate the Data Link Connector (DLC) on the vehicle. For commercial vehicles, this is typically in the driver's cab.
  3. Connect the VCI to the vehicle using one of the following methods:
    • For OBD II DLC ports: Use the DB15F to HD15F data cable along with the OBD II adaptor to connect the VCI to the vehicle's DLC port.
    • For non-OBD II DLC ports: Select the appropriate adaptor cable from the accessory kit based on the vehicle's DLC type. Replace the OBD II adaptor with the chosen adaptor.
  4. If the DLC pin is damaged or provides insufficient power, power the VCI using either:
    • Battery Clamps Cable: Connect one end to the VCI's DC-IN port and the other to the vehicle's battery.
    • Cigarette Lighter Cable: Connect one end to the VCI's DC-IN port and the other to the vehicle's cigarette lighter receptacle.
  5. If performing diagnosis via data cable, connect one end of the data cable to the VCI's data transmission port and the other end to the USB port of the diagnostic tool.
  6. Turn on the vehicle's ignition switch. The VCI is now ready for diagnosis.
Diagram illustrating how to connect the X431 SmartLink C to an X431 Pro3S tablet and a commercial vehicle via a diagnostic connector.

Figure: Connection Diagram for X431 SmartLink C.

Diagram showing the SmartLink C 2.0 module with labels for its ports: DB-15 Diagnostic Connector, 3.97 Inch Touch Screen, DC-IN Port, LAN/WAN Port, and Data I/O Port.

Figure: SmartLink C 2.0 Dongle Ports.

5.2. Performing Diagnosis

After connecting the VCI to the vehicle and the diagnostic tool:

  1. On your diagnostic tablet, go to VCI/VCI Management.
  2. Select the desired VCI Serial Number.
  3. Navigate to the Diagnose module to begin a diagnostic session.

The SmartLink C 2.0 supports comprehensive diagnostic functions including:

  • Reading and clearing Diagnostic Trouble Codes (DTCs)
  • Viewing Live Data streams
  • Performing Special Functions
  • Executing Actuation Tests
Image showing the X431 HDIII module being upgraded to the X431 SmartLink C 2.0, highlighting improved visualization for easier diagnosis.

Figure: SmartLink C 2.0 Upgrade Visualization.

Diagram illustrating remote diagnosis with Cloud Diagnosis and SmartLink C 2.0, showing data flow between the diagnostic tool, SmartLink C, and the vehicle.

Figure: Remote Diagnosis Capability.

5.3. Supported Vehicle Coverage

The SmartLink C 2.0 supports a wide array of commercial vehicles, passenger vehicles, new energy vehicles, and machinery. This includes:

  • Engine Diagnosis: Supports brands like Cummins, Bosch, Weichai, Shangchai, Yuchai, Xichai, Chaochai, Yangchai, Quanchai, Yunnei Power, Xinchen Power, Chaochai Xinfeng, Great Wall Xinfeng, Doosan, Huayuan Lai, Platinum, Isuzu, and more.
  • ABS System: Covers WABCO ABS, Delphi ABS, Knorr ABS, Bosch ABS, Komi ABS, and various localized ABS systems.
  • Natural Gas Diagnosis: Supports Cummins, Nanchong, Shangchai, Weichai, Xichai, Iveco, Yuchai, heavy gas, Chaochai, and Yunzhong natural gas systems.
  • Post-Processing Diagnosis: Includes Guangxi Sanli, Tenneco, Kailong, Tianlan DCU, and Bosch post-processing systems.
  • Calibration Function: Supports calibration for brands like Chaochai, Dongfeng Renault, Cummins, Shangchai, Weichai, Xichai, Yuchai, heavy truck, and Yangchai.
  • ECU Brush Writing: Compatible with Bosch ECU, Nanyue single pump ECU, Bosch bottom layer, natural gas ECU, electric ECU, Delphi ECU, China National Heavy Duty Truck ECU, and Tenneco DCU.
Collage of images showing various commercial vehicles and machinery, including trucks, vans, excavators, and buses, indicating broad diagnostic support.

Figure: Supported Vehicle Types.

Table listing over 80 brands of heavy-duty trucks supported by the diagnostic tool, including Hino, Yutong Bus, ZF, Isuzu, Fuso, DAF, Volvo, Mack, Scania, and many more.

Figure: Supported Heavy Duty Truck Brands.

Image displaying a list of heavy-duty software supported, including Renault, IRIZAR, IRISBUS, Yutong Bus, Mercedes Benz, VOLVO, ISUZU, IVECO, BREMACH, CREDO, KNORR ABS, and more, totaling 88 software types.

Figure: Heavy Duty Software List.

6. Maintenance

6.1. General Care

  • Keep the device clean and free from dust and debris.
  • Avoid exposing the device to extreme temperatures or humidity.
  • The industrial shockproof design provides durability, but avoid unnecessary drops or impacts.

6.2. Firmware and Software Updates

Regularly update the device's firmware and diagnostic software to ensure optimal performance and the latest vehicle coverage.

  • Firmware Update: Connect the VCI to a modem using the crossover cable via the LAN/WAN port. Follow the instructions on your diagnostic tablet to perform the update.
  • Software Update: After activating the VCI, tap "Update" on your diagnostic tablet to download and install the latest diagnostic software.

7. Troubleshooting

  • No Power to VCI: If the vehicle's DLC pin is damaged or provides insufficient power, connect the DC-IN port to an external DC power supply using either the Battery Clamps Cable or the Cigarette Lighter Cable.
  • Connection Issues: Ensure all cables are securely connected. For wireless connections, verify Bluetooth and Wi-Fi settings on both the VCI and the diagnostic tablet.
  • Software Not Appearing: After activation, ensure you have tapped "Update" to download and install the diagnostic software. A new "HD / Heavy-duty" tab should then appear.
  • Language Settings: The product supports multiple languages, including Spanish. Check the settings menu on your diagnostic tablet to change the language.
  • Android Compatibility: The device is designed to work with compatible Android-based LAUNCH diagnostic tablets. Ensure your tablet meets the system requirements.

8. Specifications

FeatureSpecification
CPUDual processor Cortex-A7 + Cortex-M7
Operating SystemLinux
Memory (RAM)256M
Storage (ROM)8GB
Display3.97-inch TFT screen, 320x480 resolution
Working VoltageDC 9-36V
Power Consumption≤6W
Operating Temperature0°C - 50°C
Dimensions (L x W x H)204mm x 110mm x 47mm
CommunicationWireless (Bluetooth, Wi-Fi 2.4/5.0GHz), Wired (USB, Ethernet)
External InterfaceUSB Type B, RJ45, OBD II-16, DC-IN
Free Upgrade2 years (for X431 products registered/activated after Jan 1, 2025; 1 year for 8-inch X431 products)
Renewal Cost495 USD per year (after free upgrade period)
Comparison table between LAUNCH (X431), SmartLink C 2.0, and HDIII, detailing CPU, OS, ROM, RAM, Resolution, Size, Connection, Visual Operation Interface, Compatible Vehicle, Language, and Super Remote Diagnosis.

Figure: SmartLink C 2.0 vs. HDIII Comparison.

9. User Tips

  • Accessory Replacement: If you lose or damage accessories such as the USB charging cable or BT connector, contact customer support for replacements.
  • Shipping Options: For faster delivery in certain regions, consider checking for local warehouse shipping options if available.
  • Feedback Benefits: After leaving positive feedback, contact customer support to inquire about potential gifts or store coupons.

10. Warranty and Support

The LAUNCH X431 SmartLink C 2.0 HD Diagnostic Tool comes with a 5-year warranty from LAUNCH TECH. NICEOBD Store provides lifetime free technical support and a full range of pre- and post-sale services for products purchased through them.

For further details and a quick start guide, you can refer to the official user manual PDF: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.