LS VISION LS-AOV02B-4G-EU

Contents

LS VISION 10MP Dual Screen 4G AOV Solar Camera User Manual

Model: LS-AOV02B-4G-EU

Brand: LS VISION

1. Introduction

Thank you for choosing the LS VISION 10MP Dual Screen 4G AOV Solar Camera. This advanced surveillance camera offers 24/7 video recording, 12X optical zoom, AI humanoid detection, and solar-powered operation for reliable outdoor security. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance.

Video 1: Unboxing the LS VISION 10MP Dual Screen 4G AOV Solar Camera and its components.

2. Package Contents

Please check the package to ensure all items are present and in good condition:

  • Camera (1)
  • Solar Panel (1)
  • Instruction Manual (1)
  • Bracket (1)
  • Screw Package (1)
Diagram showing the camera, solar panel, installation bracket, user manual, and screws.

Figure 1: Package contents and product dimensions.

3. Setup Guide

3.1. App Download and Installation

  1. Scan the QR code provided in the manual or on the product packaging to download the HiEasy APP.
  2. Alternatively, search for "HiEasy APP" in your device's application store and install it.

3.2. Registration and Login

  1. Click "New User Registration" in the app.
  2. Choose your country code and fill in your mobile phone number or email. Follow the prompts to register after passing the verification code.
  3. Fill in your account and password information to log in.

3.3. Adding the 4G Camera to the App

To add the camera, ensure it is powered on and connected to the network (you should hear voice prompts like "lox x x x").

  1. Open the HiEasy APP.
  2. Click the "Add device" button (usually in the middle or upper right corner).
  3. Scan the QR code located on the camera body.
  4. A blue light will indicate successful device addition, and the camera will be in wake-up status.
LS VISION 10MP Dual Screen 4G AOV Solar Camera with app interface showing dual screens and 12X optical zoom.

Figure 2: Camera overview and app interface.

3.4. Physical Installation

The camera can be installed on the side, ceiling, or in a normal position. Use the provided bracket and screws for secure mounting.

Solar panel connected to the camera with a 1.5m extension cord, mounted on a building wall.

Figure 3: Solar panel connection and camera mounting example.

Connect the solar panel to the camera using the 3m extension cord to ensure uninterrupted power supply throughout the day and night. The camera has built-in 10500mAh batteries for continuous operation.

4. Operating Instructions

4.1. Home Page and Live Video

The app's home page provides an overview of your devices. From here, you can access live video feeds, device settings, and other features. The live video page allows you to view real-time footage, switch between cameras (if multiple are connected), and access controls like:

  • 4 Palace Grid / Refresh
  • Device Share
  • Tracking / Panoramic
  • Two-Way Talk / Message
  • Album / Delete Device
  • 4G Traffic / Full Screen
  • Local Recording / Sound / Definition (HD, SD, Smooth)
  • Take a photo for current screen
  • Personal Settings

4.2. Dual Lens, Dual Screen, and 12X Optical Zoom

The camera features a dual-lens system, providing two video screens within the HiEasy APP. One screen displays a wide-angle view, while the other shows the PTZ (Pan-Tilt-Zoom) lens view. The PTZ lens supports 12X optical zoom, allowing you to zoom in and out on observed objects for greater detail directly from the app.

App interface showing dual screens from the camera, one wide-angle and one zoomed in with 12X optical zoom.

Figure 4: Dual Lens, Dual Screen functionality.

Camera demonstrating 12X optical zoom on a car in the distance, with a magnified inset view.

Figure 5: 12X Optical Zoom in action.

4.3. PTZ Rotation and Preset Points

The camera can be rotated 355° horizontally (pan) and 100° vertically (tilt) via the app. You can set preset points for different monitoring directions. Simply click to return to a saved preset point for quick monitoring of specific areas.

Camera mounted on a wall, showing its pan (355°) and tilt (100°) rotation capabilities controlled via a mobile app.

Figure 6: PTZ Rotation control.

Outdoor scene with three marked preset points (Preset 1, Preset 2, Preset 3) for camera monitoring.

Figure 7: Preset Point Settings for monitoring.

4.4. Working Modes

Access working mode settings in the app to configure camera behavior:

  • AOV Mode (Always On Video): The device actively detects and records. When no moving objects are in the area, it enters low frame rate recording. When a humanoid is detected, it switches to full-frame recording.
  • Low Power Mode: The device only works and records when moving objects are triggered.
  • Power Saving Mode: Closes device detection and record functions. Only supports APP preview.

You can also set the recording trigger duration for low power mode (5S/10S/15S).

Comparison diagram showing AOV Low Power Camera working mode (low frame rate during standby, full frame on humanoid detection) versus PIR Low Power Camera working mode (no recording in standby).

Figure 8: AOV Camera vs. PIR Camera working modes.

4.5. AI Humanoid Detection and Auto Tracking

The camera features highly sensitive AI humanoid detection. When a human moves in front of the camera, it will pan or tilt to follow the movement, ensuring no important moments are missed. The app will display alarm information prompts, sound alarms, and flash lights upon detection. The detection distance is up to 30 meters.

Mobile app showing a 'Motion Detection' alert, with a person detected entering the monitoring area.

Figure 9: AI Humanoid Detection alert.

Diagram illustrating automatic tracking, where the camera follows a person walking through the monitored area.

Figure 10: Automatic Tracking functionality.

4.6. Night Vision Modes

The camera is equipped with both white light and IR LED lights, offering versatile night vision options:

  • Full Color Night Vision: When the camera detects a moving object, it automatically turns on the white light to provide full-color night vision.
  • Infrared Night Vision: Standard black and white night vision using infrared LEDs.
  • Intelligent Night Vision: Automatically switches between IR and color night vision based on detected motion.
Three panels showing different night vision modes: Color Night Vision, Infrared Night Vision, and Intelligent Night Vision detecting a person.

Figure 11: Full Color Night Vision modes.

4.7. Alarm Management

Configure alarm settings in the app:

  • Alarm Sound: Device will send out alarm sounds when humanoids are detected. You can set the alarm sound type, volume, and duration.
  • Alarm Flashing Light: Strobe auto light turns on after humanoid detection.
  • Low Battery Alarm: Push notification when battery reaches a lower threshold.
  • Power Off Alarm: Push notification when the battery is going to be exhausted.

4.8. Power Settings

In the power settings, you can choose the power supply mode and whether the device should start up automatically when charging.

  • Power Line Power Supply: Device will start up automatically when charging.
  • Solar Power Supply: Device will start up automatically when charging.
  • Use Only Battery: Device will not start up automatically when charging.

Note: Different products may have different power supply modes; configure based on your actual product.

4.9. Video Recording and Playback

The camera supports both TF card storage (up to 128GB, provided by LS VISION) and cloud storage (paid subscription) for video recording. You can replay recorded videos at any time through the app.

Mobile app interface showing cloud playback and card playback options, with a timeline for recorded events.

Figure 12: Video Replay options.

4.10. Device Share and Multi-User Remote Access

You can share access to your camera with family and friends. After setting up the camera in the main account, it can be shared with multiple family members, allowing everyone to remotely access the camera from anywhere.

  • Click the Share icon on the home page to enter the sharing management page.
  • Choose the "Share" menu.
  • Fill in other users' mobile phone numbers or email addresses to share.
  • You can also share via QR code, Copy Link, or WeChat.
Diagram showing multiple users accessing the camera feed remotely via their mobile devices.

Figure 13: Multi-Users Remote Access.

5. Maintenance

5.1. General Care

  • Strictly prohibit water ingress into internal components.
  • Ensure the lens part is free from stains or other objects covering it.
  • Protect the battery component well.
  • Avoid constantly keeping the sound alarm open to conserve battery life.

5.2. IP66 Waterproof Rating

The camera has an IP66 waterproof rating, making it resistant to water and dust. It is designed to withstand various bad weather conditions, including rain and dust.

Outdoor security camera with solar panel, shown operating reliably during a rain shower, highlighting its IP66 waterproof feature.

Figure 14: IP66 Waterproof feature.

6. Troubleshooting (FAQ)

6.1. Cannot connect when adding device

First, ensure the device has sufficient 4G traffic. Then, long-press the device's Reset button for 5 seconds. Wait for the voice prompt "reset successful," and then try adding the device again.

6.2. Device Off-line

Make sure the device has power, a strong 4G signal, and sufficient 4G traffic. Check all connections and power sources.

6.3. Cannot receive notifications on smartphone

Please check whether the notification function is enabled in the app's Message-Setting menu.

6.4. Did not find recording during playback

Check if a TF card is installed and if it is damaged. Also, verify that the device time and video playback time are correct.

6.5. Real-time video is laggy

Check the 4G signal condition and try to ensure the 4G signal strength is above 1. Check if the 4G signal is being interfered with. Try moving the device to another location with better 4G signal coverage. You can also try switching the device's image definition (e.g., from HD to SD).

6.6. Indicator Light Explanation

  • Indicator light off: Camera is in sleep or shutdown state.
  • Red light always on: Camera is starting.
  • Blue light slow blinking: Camera is connecting to the network.
  • Blue light always on: Camera is awake and connected to the network successfully.
  • Red light slow blinking: Camera is waiting for the APP to scan for adding.

7. Specifications

AttributeValue
Brand NameLS VISION
Model NumberLS-AOV02B-4G-EU
Power SupplyNormal, Solar Powered
Power SourceSolar powered
Internal Storage128G (Max TF card)
Supported Mobile SystemsiOS, Android
Viewing Angle360°
Lens (mm)4mm
Focal Length4mm
Connectivity4G
Sensor BrandSony
Signal SystemNTSC, PAL
SensorCMOS
InstallationSide, Ceiling, Normal
TechnologyINFRARed, Pan / Tilt / Zoom
OriginMainland China
CertificationCE
Alarm TypeLocal Alarm
Smart home platformNONE
APPHiEasy
Feature 14G AOV Solar Camera
Feature 212X zoom
Feature 3AOV+ PIR Ai human detection
Feature 4Built-in Cloud SIM
Feature 58 Watt solar panel
Feature 63m Extension cord
Feature 7Built-in 10500mAh batteries
Feature 8Auto Zoom Tracking
Feature 9Waterproof grade IP66
Feature 10Two-way voice intercom

8. User Tips

  • Optimal Solar Charging: Position the solar panel in an area that receives direct sunlight for the majority of the day to ensure continuous charging and maximize battery life.
  • Network Stability: For best performance, ensure the camera is installed in an area with strong 4G signal coverage. If video is laggy, try reducing the video quality in the app.
  • Privacy Zones: Utilize the preset point settings to focus monitoring on specific areas of interest while potentially avoiding unnecessary recording of public spaces.

9. Warranty and Support

Your LS VISION camera comes with a 1-year warranty. For any questions or technical support, please feel free to contact us. We provide 7/24 technical support service.

Image showing a '1 Year Warranty' badge and a customer satisfaction rating system with stars for Description Match, Seller Service, and Logistics.

Figure 15: Warranty information.

Note: This camera does not support ONVIF to work with NVR or DVR. PC client is not supported.

10. Statement of Compliance

Disclaimer

⚠️ Camera products can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.