1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your new RACBOX Motorcycle Radiator. Please read this manual thoroughly before attempting any installation or use to ensure proper function and to prevent damage or injury.
This product is designed to meet relevant national automotive lighting industry standards and has undergone strict quality testing.
2. Safety & Warnings
Important Safety Information
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord (if applicable) out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
WARNING: Radiator coolant can be hot and under pressure. Always allow the engine to cool completely before servicing the cooling system.
3. Specifications
| Attribute | Detail |
|---|---|
| Product Name | Motorcycle Radiator |
| Material | Aluminum |
| Color | Black |
| Compatibility (Fitment 1) | For Yamaha MT-07 2015-2023 |
| Compatibility (Fitment 2) | For Yamaha FZ07 2015-2017 |
| Compatibility (Fitment 3) | For Yamaha XSR700 2018-2023 |
| Package Weight | 1.96 kg |
| Package Dimensions (L x W x H) | 40 x 38 x 15 cm |
Dimensions Diagram
Hose Connection Diameter
4. Package Contents
The package includes:
- 1 x RACBOX Motorcycle Radiator
5. Installation Instructions
No modifications are required for installation; this is a direct bolt-on replacement. However, professional installation is recommended if you are not familiar with motorcycle maintenance.
- Prepare & Drain: Ensure the engine is cool. Disconnect the battery's negative terminal. Drain the existing coolant from the system.
- Remove Old Parts: Carefully remove any fairings, hoses, and mounting bolts securing the old radiator. Once all fasteners and connections are detached, remove the old radiator.
- Install New Radiator: Align the new RACBOX radiator into its correct position. Secure it by tightening the mounting bracket bolts.
- Connect & Seal: Attach the inlet and outlet hoses to the new radiator. Secure all clamps firmly to ensure there are no leaks.
- Refill & Bleed: Add new coolant to the system. Start the engine and allow it to run to bleed any trapped air from the cooling system. Carefully check for any leaks around the hose connections and radiator.
Note: The instruction manual also mentions: "If the light does not turn on, please reverse the plug polarity." This note appears to be a general instruction from the original document and may not directly apply to a passive radiator component. Please disregard if not relevant to your specific setup.
6. Operation
The RACBOX Motorcycle Radiator operates passively as part of your motorcycle's cooling system. Once properly installed and filled with coolant, it will automatically regulate engine temperature by dissipating heat. No user intervention is required during normal operation.
7. Maintenance
- Regular Inspection: Periodically check the radiator for any signs of damage, bent fins, or leaks. Ensure all hose connections are secure.
- Cleaning: Keep the radiator fins clean from dirt, debris, and insects to ensure optimal airflow and cooling efficiency. Use a soft brush or low-pressure air to clean the fins. Avoid high-pressure washing directly on the fins, as this can bend them.
- Coolant Level: Regularly check your motorcycle's coolant level and top up as necessary according to your motorcycle manufacturer's recommendations.
- Pressure Cap: Ensure the radiator pressure cap is securely fastened and in good condition. A faulty cap can lead to cooling system issues.
8. Troubleshooting
If you encounter issues with your radiator, consider the following:
- Overheating: Check coolant levels, inspect for leaks, ensure radiator fins are clean and not obstructed, and verify the proper function of your motorcycle's thermostat and cooling fan.
- Leaks: Re-check all hose connections and clamps for tightness. Inspect the radiator core for any visible damage.
- Poor Cooling Performance: This can often be attributed to clogged fins, low coolant, or air trapped in the system. Ensure proper bleeding of the cooling system after installation.
9. User Tips
- Upon receiving your radiator, carefully inspect the packaging and the product itself for any signs of damage during transit.
- Users have noted the product is generally well-packaged and of good quality, suggesting a reliable replacement part.
10. Warranty & Support
RACBOX Warranty Information
- Standard Warranty: RACBOX warrants to the end-user that the product shall materially conform to Racbox's published specifications in the user manual, subject to the terms and conditions below.
- Warranty Period: One Year (12 Months) from the date the new product is first delivered to the End-User after being purchased.
- What is Covered: The Standard Warranty provides support for replacement parts and shipping costs during the Warranty Period. Customers are covered for replacement parts, partial refund, and full refund on any product due to manufacturing defects of components or workmanship.
- What is NOT Covered: The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The Warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error and failure to follow instructions relating to Product's use.
- How to Get Warranty Service: If you have any questions or need to request a replacement part, please contact RACBOX customer support via phone, email, or through their Live Support system.
Manufacturer & EU Representative Information
Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou, China
EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
For further assistance, you may refer to the official user manual PDF: View User Manual (PDF)