Introduction
Thank you for choosing the XIAOMI Smart Doorbell 4. This device is designed to enhance your home security with its advanced features, including dual high-definition cameras, infrared night vision, AI human detection, and smart home integration. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and a secure environment.
Important Note: This product requires a 2.4GHz Wi-Fi network for operation and does not support network-free environments.
Region Setting: This is the China version. Please ensure you change the region of your Mi Home App to "China Mainland" before attempting to connect the device.
Setup Guide
1. Mi Home App Configuration
Before installing the doorbell, configure the Mi Home App:
- Open the Mi Home App.
- Tap "Profile" at the bottom right.
- Tap "Settings".
- Tap "Region".
- Select "Chinese mainland".
2. Device Binding and Network Configuration
Follow these steps to bind the doorbell to your Mi Home App:
- Use the Mi Home App to scan the QR code located on the back of the doorbell.
- Follow the on-screen prompts within the app to complete the binding process and connect to your 2.4GHz Wi-Fi network.
3. Doorbell Installation
To install the doorbell on your door:
- Apply the double-sided adhesive tape to the back of the mounting plate.
- Attach the mounting plate securely to your door at the desired height.
- Align the mounting holes at the bottom of the doorbell with the bottom clips on the mounting plate and snap it into place.
- Snap the top of the doorbell onto the mounting plate to complete the installation.
Operating Instructions
1. Dual Camera Monitoring
The Smart Doorbell 4 features dual cameras (3MP main camera + 1MP secondary camera) with a 180° ultra-wide viewing angle to provide comprehensive coverage of your entrance area. The main camera monitors visitors, while the secondary camera watches over packages, ensuring no blind spots up to 3 meters in front of your door.
2. AI Humanoid Detection and Notifications
Utilizing Xiaomi's self-developed AI algorithm, the doorbell accurately distinguishes between visitors, couriers, and strangers. The human-shaped infrared sensor detects activity up to 5 meters, automatically recording footage and sending notifications to your Mi Home App. You can also set personalized notes for recognized faces.
Linger Detection Notification: If someone lingers near your door, the Mi Home App will send a notification. Tap the notification to enter the call interface and speak with the visitor.
3. Two-Way Voice and Voice Changer Intercom
Engage in real-time remote conversations with visitors using the HD microphone and speaker. For added privacy, the doorbell supports voice changing options (e.g., "uncle" or "clown" voices), which can be particularly useful for individuals living alone.
Multi-Scenario Calling: Even when you're not home, you can check doorstep activity via the Mi Home App and speak directly to visitors. Customize quick replies for common situations like package deliveries.
4. Infrared Night Vision
Both cameras are equipped with 940nm infrared illuminators, providing clear visibility in low-light conditions without any distracting red glow or noise. This ensures crystal-clear monitoring even in dark hallways.
5. Xiaomi Ecological Linkage and Smart Voice Control
The doorbell supports Xiaomi Surge Smart Link, allowing you to view front door activity on compatible Xiaomi TVs, Smart Home Displays, and other screen-enabled smart devices. You can also use smart voice commands (e.g., "Xiao Ai") to activate the camera or check battery levels, making daily operations more convenient.
Maintenance
1. Charging the Doorbell
The doorbell is powered by a 5000mAh high-capacity battery, offering up to 6 months of battery life with approximately 20 triggers per day. When the battery is low, you will receive a notification via the Mi Home App. To charge the doorbell:
- Insert the removal pin into the release hole at the top of the doorbell and press until the spring-loaded tab inside is fully depressed.
- Grip the doorbell body outward and gently pull upward to remove it from the mounting backplate.
- Charge the doorbell using the Type-C power cable included in the package.
- Once charged, reattach the doorbell to the mounting plate.
2. Storage Management
The doorbell offers free 3-day looping cloud storage for event footage. For extended storage, you can expand it using a MicroSD card (up to 256GB). Manage your storage settings and review footage through the Mi Home App.
Troubleshooting
Connectivity Issues
- No connection or unstable connection: Ensure your Wi-Fi network is 2.4GHz. The doorbell does not support 5GHz networks. Check your router settings and signal strength.
- Cannot bind device: Verify that the region setting in your Mi Home App is set to "China Mainland". Incorrect region settings will prevent device binding.
Anti-Theft Protection
The doorbell is equipped with multi-layer anti-theft protection. It is installed with strong 3M adhesive and screws, and requires mandatory binding to your doorbell account. If removal is detected, an alarm will sound, video footage will be captured, and alerts will be sent to your phone. Ensure the doorbell is securely mounted and bound to your account to utilize this feature.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | XIAOMI |
| Model | Smart Doorbell 4 |
| Origin | Mainland China |
| Power Source | Battery (other) |
| Battery Capacity | 5000mAh |
| Battery Life | Up to 6 months (20 triggers/day) |
| Main Camera Resolution | 3MP HD |
| Secondary Camera Resolution | 1MP |
| Viewing Angle | 180° Ultra-Wide Angle |
| Infrared Night Vision | 940nm Infrared Illuminators |
| Human Detection Range | Up to 5 meters |
| Communication Method | Wi-Fi (2.4GHz only) |
| Storage | Free 3-day looping cloud storage, MicroSD card expansion (max 256GB) |
| Security | Built-in Mi Home Security Chip (MJA1), AES-128 encryption |
| Inbox Adaptor | No |
| Package Dimensions (L x W x H) | 18cm x 14cm x 7cm |
| Package Weight | 0.432 kg |
User Tips
- Wi-Fi Compatibility: Always ensure your home Wi-Fi network is 2.4GHz. The doorbell will not connect to 5GHz networks.
- App Region: For initial setup and consistent functionality, verify that your Mi Home App's region is set to "China Mainland".
- Privacy Enhancement: Utilize the voice changer intercom feature when interacting with visitors, especially if you are home alone, to enhance your privacy and security.
- Battery Monitoring: Regularly check the battery status through the Mi Home App to avoid unexpected power loss and ensure continuous monitoring.
- Extended Storage: If 3-day cloud storage is insufficient for your needs, consider installing a MicroSD card (up to 256GB) for additional local video storage.
Warranty and Support
For detailed warranty information and customer support, please refer to the official XIAOMI documentation or contact your retailer. A comprehensive user manual in PDF format is available for download from the product's support page. You can access the PDF manual directly via this link: XIAOMI Smart Doorbell 4 User Manual (PDF).