1. Introduction
Thank you for choosing the YRYTAT V6 PRO Direct Drive Rotary Tattoo Machine. This manual provides essential information for the safe and effective use of your new tattoo machine. Please read it thoroughly before operation and keep it for future reference.
The V6 PRO is a high-performance rotary tattoo machine featuring a custom powerful coreless motor and an adjustable stroke mechanism, designed for precision and versatility in tattooing.
2. Safety Information
- Always ensure the machine is clean and sterilized before and after each use.
- Use only compatible and sterile needle cartridges.
- Do not expose the machine to excessive moisture or liquids.
- Keep the machine out of reach of children.
- Disconnect the power supply before cleaning or performing any maintenance.
- Operate the machine within the recommended voltage range to prevent damage.
- This device is intended for professional use only.
3. Package Contents
Please check the package for the following items:
- V6 PRO Rotary Tattoo Machine
- Power Supply Unit (if included in your specific kit)
- Connection Cable (RCA cable)
- User Manual (this document)
4. Product Overview
Familiarize yourself with the components of your V6 PRO tattoo machine and its power supply unit.
Figure 1: V6 PRO Tattoo Machine in operation, displaying voltage and time.
Figure 2: Power Supply Unit Controls. Features include a Voltage drop key, On-off key, Voltage drop increase key, and a timepiece display.
5. Setup
- Charge the Power Supply: If your V6 PRO comes with a wireless power supply, ensure it is fully charged before use. A full charge typically takes 2-3 hours.
- Attach the Grip: Securely screw the grip onto the machine body.
- Insert Needle Cartridge: Carefully insert a sterile needle cartridge into the machine's grip until it clicks into place.
- Connect Power (if wired): If using a wired setup, connect the RCA cable to the machine and your external power supply.
- Adjust Needle Depth: Rotate the grip to adjust the needle depth to your desired setting.
6. Operation
Grip Operation (for integrated power supply models):
- Power On/Off: Long press the 'O' button.
- Start/Pause: Short press the 'O' button.
- Increase Voltage: Press the '+' button to increase voltage by 0.1V or 0.5V increments.
- Reduce Voltage: Press the '-' button to reduce voltage by 0.1V or 0.5V increments.
Recommended Operating Voltage: The recommended voltage for optimal performance is 4-6V. However, it is recommended to work at a voltage of 4-7V, and if the voltage is good enough, it can be as low as around 3V depending on the needle configuration and desired effect.
7. Maintenance
- Cleaning: After each use, wipe down the machine body with a sterile wipe or disinfectant solution. Do not immerse the machine in liquid.
- Sterilization: Ensure all parts that come into contact with skin or ink are properly sterilized according to professional tattooing standards.
- Storage: Store the machine in a clean, dry place away from direct sunlight and extreme temperatures.
- Lubrication: Periodically apply a small amount of machine oil to moving parts as recommended by the manufacturer (if applicable, consult the full PDF manual for details).
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on. | Low battery (wireless) or power cable not connected properly (wired). | Charge the power supply or check cable connections. |
| Inconsistent power/stuttering. | Low battery, loose connection, or incorrect voltage setting. | Ensure battery is charged, check all connections, adjust voltage. |
| Needle not extending/retracting properly. | Improperly seated needle cartridge or grip adjustment. | Re-seat the needle cartridge, adjust the grip for proper needle depth. |
9. Specifications
| Feature | Detail |
|---|---|
| Product Name | V6PRO Tattoo Machine |
| Material | Aluminum alloy |
| Weight | 120g |
| Motor | Customized Coreless Motor |
| Recommended Voltage | 4-6V (Optimal working range 4-7V, can operate as low as 3V) |
| Speed | 12000 RPM |
| Journey (Stroke) | 3-5.0mm |
| Grip Size | 86.5mm x 34mm |
| Grip Bar | 26mm x 8mm |
| Grip Net Weight | 93g |
| Adjustable Voltage Range | 4V-12V (±0.1V or ±0.5V increments) |
| Battery Capacity | 1600mAh |
| Full Charge Time | 2-3 hours |
| Working Time | 4-6 hours |
| Gun Type | Electric |
| Certification | 3C, CE, GS, CCC |
| Origin | Mainland China |
Figure 3: Dimensions of the V6 PRO Power Supply Unit (8.65cm/3.41in height, 3.4cm/1.34in width).
10. User Tips
- For fine lines and detailed work, consider using a lower voltage setting.
- For shading and packing, a slightly higher voltage within the recommended range might be more effective.
- Regularly check the battery level during long sessions to avoid interruptions.
- Always use high-quality, compatible needle cartridges for the best results and to prevent machine wear.
11. Warranty and Support
For detailed warranty information and support, please refer to the seller's return and refund policy. The seller offers a return and refund policy for various issues, including items not delivered, damaged items, or if you are not satisfied with your order.
Additional item guides and documents, including a comprehensive user manual in PDF format, are available. You can access the PDF manual here.
For any issues or inquiries, please contact the seller directly through the platform's messaging system. They are committed to resolving any problems you may encounter.