1. Product Overview
The CARABC Wireless CarPlay & Android Auto Module (Model: CX-3GQ7) is designed to integrate advanced smartphone connectivity into your Audi's existing MMI 3G system. This module provides a seamless 'OEM-like' experience by utilizing the original dashboard display and MMI 3G controls (rotary controller and steering wheel controls).
It supports both wireless and wired connections for CarPlay and Android Auto, MirrorLink, and USB media playback. The system also supports voice control and integration with various navigation and multimedia applications.
Key Features:
- Dedicated in-car video interface for Audi A6 (2009-2011) and Q7 (2010-2015) with 6.5-inch/7-inch screens and MMI 3G platform.
- Built-in 2.4G and 5.8G WIFI for connection and Bluetooth 5.0 technology.
- Supports Apple CarPlay, Android Auto, MirrorLink, and USB flash drives.
- Control via steering wheel, MMI rotary knob, and voice commands (e.g., "Hey Siri...").
- GPS navigation applications (Google Maps, Waze, Apple Maps) with real-time traffic information.
- Supports adding reverse cameras (CVBS AHD720P).
- Plug and play, non-destructive installation without cutting wires.
- Ability to switch between original car system and module display using factory controls.
2. Product Specifications
| Specification | Value |
|---|---|
| Operating Voltage | 9-16V |
| Operating Temperature | -30 to +75°C |
| Stored Temperature | -30 to +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 500mA (rated), 3A (Max) |
| Shutdown Current | 3mA (Clock is on) |
| Quiescent Current | Less than 3mA |
| USB Charging Current | ≤2A (host activates circuit protection if >1A to prevent burning) |
3. Compatibility Check
Before installation, ensure your vehicle is compatible with the CX-3GQ7 module. This module is designed for Audi MMI 3G systems in specific models and years:
- Audi A6: 2009-2011
- Audi Q7: 2010-2015
The module supports 6.5-inch, 7-inch, and 8-inch screens.
How to Verify Your Car System (MMI 3G):
You can check your MMI 3G version (Low/Basic, High, or 3G+) by navigating to the 'Setup' menu in your car's display and looking for 'Version information'.
Important Visual Check: Ensure your car's control panel has an 'AC' button and does NOT have an 'Audi cd changer' button, as shown in the diagram below.
4. Installation Guide
This section provides a general guide for installing the CX-3GQ7 module. Professional installation is recommended.
Package Contents:
- CX-3GQ7 Main Unit (Decoder Box)
- LVDS Cable
- Power Cable
- WIFI Antenna
- Installation Tools (e.g., trim removal tools)
Dip Switch Configuration:
CAUTION: Ensure CarPlay power is disconnected when adjusting the dip switches. Once set, connect CarPlay power.
| Switch 1 | Switch 2 | Switch 3 | Switch 4 | Switch 5 | Car Model | Screen Size |
|---|---|---|---|---|---|---|
| OFF | ON | OFF | ON | OFF | 09-11 A6, 09-15 Q7 | 400*240 5.8" |
| OFF | OFF | OFF | OFF | ON | 09-11 A6, 09-15 Q7 | 800*480 6.5"/7"/8" |
Wiring Connections:
- LVDS: Connect to LVDS from the original head unit. Ensure this part is securely fastened.
- Power:
- Yellow: B+
- Red: ACC
- Black: GND
- Blue: Camera power supply
- Brown: Re detect
- ANT: Antennas cannot be attached to hardware surfaces.
- Other Ports:
- White and Black: 360-RX
- MIC: Extra Mic Port
- REAR-CVBS: Rear view input
- FRONT-CVBS: Front view input
- AUX: Audio output
- USB: Connect phone, USB disk, software update
Reversing Camera Wiring:
- Connect 'cam-power' to the camera power supply.
- Connect 'rear-CVBS/AHD720P (25FPS/30FPS)' to the camera input.
5. Operating Instructions
Connecting Wireless CarPlay:
- On your phone, enable Wi-Fi and Bluetooth.
- On the car's display, navigate to the module's settings and select "Discover and connect device".
- Select the Bluetooth device name starting with "CX_BT....." and pair your phone. CarPlay should then activate.
Connecting Wireless Android Auto:
- On your phone, enable Wi-Fi and Bluetooth.
- On the car's display, navigate to the module's settings and select the Bluetooth device named "CX-BTXXXX". Pair your phone. Android Auto should then activate.
Dual System Switch:
The module is compatible with the original car system, allowing you to switch between the module's interface (CarPlay/Android Auto) and the original MMI system freely and seamlessly using the car's factory controls.
Control Methods:
- Steering Wheel Control: Use the steering wheel buttons to adjust volume (up/down) and navigate tracks (short press up/down).
- Central Control Knob:
- Long press to switch between systems.
- Rotate the knob to move the cursor.
- Short press to confirm selections.
- Long press to activate voice control.
- Touch Screen: If your Audi has a touch screen, you can use it for direct interaction.
- Voice Control: Utilize voice assistants (e.g., Siri, Google Assistant) for navigation, phone calls, music playback, and other commands.
Audio Setup:
To ensure proper audio output from the module:
- Before entering the installation system, connect your phone to the original car's Bluetooth. Select both 'call' and 'media' at the same time. Then, select the original car audio on the Bluetooth stereo interface.
- Alternatively, after entering the installation system, switch the original car sound channel to the AUX channel.
Mirroring Link:
The module supports Mirroring Link, allowing you to stream content from your smartphone directly to the car's display.
Online Navigation & Music Playback:
The module supports various online navigation applications such as Waze, Google Maps, Apple Maps, NAVER Maps, and T Maps, providing real-time traffic information. For music, you can play mobile music and USB music with Hi-Fi sound quality.
6. Troubleshooting
If you encounter any issues, please refer to the following troubleshooting steps:
- Screen not showing normally: Please check the LVDS cable connection and verify the DIP Switch settings are correct for your car model and screen size.
- Sound problems: Ensure that the Multimedia settings and the original car system's audio settings are correctly configured, especially the Bluetooth audio or AUX channel selection.
- Mainframe pilot lamp not working: Check the power cable connection to the module and inspect the fuse for any issues.
7. Maintenance
To ensure the longevity and optimal performance of your CARABC module:
- Keep all cable connections secure and free from strain.
- Avoid exposing the module to extreme temperatures or moisture.
- Regularly check for any loose connections, especially after driving on rough terrain.
8. Warranty & Support
The CARABC Wireless CarPlay & Android Auto Module comes with a 1-year warranty.
For further detailed instructions, technical support, or warranty claims, please refer to the official user manual PDF available at: CARABC User Manual (PDF).
9. User Tips
- Always perform the compatibility check thoroughly before attempting installation to avoid issues.
- When adjusting DIP switches, double-check your car's screen resolution to select the correct setting.
- If you experience intermittent connectivity, try restarting both your phone's Bluetooth/Wi-Fi and the car's MMI system.
- For the best audio experience, ensure your car's AUX input is selected or Bluetooth audio is properly configured.