1. Product Overview
The Haozee MiNi PIR Motion Sensor is a high-precision, small, and exquisite device designed for smart home security and automation. It features both brightness and PIR motion detection capabilities, offering real-time monitoring and instant alerts. This sensor is compatible with Zigbee 3.0 hubs and can integrate with systems like Home Assistant and Zigbee2mqtt.
There are two main versions of this sensor:
- Z2M Zigbee Version: Only supports Zigbee2mqtt in Home Assistant. Works with Zigbee 3.0 hubs. Not supported by Tuya/Smart Life.
- Tuya Version: Designed for use with Tuya/Smart Life platforms.
2. Setup and Installation
2.1 Network Configuration
- Power On: Open the battery cover by rotating it counter-clockwise. Remove the battery insulation film to power on the device.
- Pairing Mode: Press and hold the pairing button for 3 seconds, then release. The red indicator light will flash, indicating the device has entered pairing mode.
- Connect to Gateway: Ensure your Zigbee gateway is powered on and in pairing mode. The product must be connected to a Zigbee gateway to properly work with the server/APP.
2.2 Physical Installation
The sensor features a bracket-type design with 360° rotation and 90° folding capabilities, along with a magnetic function for easier installation. Remove the protective film from the adhesive on the base and stick the device where needed.
Recommended Installation Height:
- For general use: 2-3.5 meters above the ground.
- If pets or small animals are present: 1-2 meters above the ground, installed on the side to avoid false triggers.
3. Operating Instructions
3.1 Motion Detection
The sensor provides 120° all-round detection with a maximum distance of 6 meters. It monitors movement in real-time, day or night.
3.2 App Notifications and History
Receive instant notifications on your phone if motion is detected, whether you are at home or not. The app also allows you to easily access past data and review activity records.
3.3 LED Indicator Control
Click the 'SET' button (or equivalent in the app) to turn the LED indicator light on or off. A single flash indicates it's turned on, and three flashes indicate it's turned off.
3.4 Luminance Meter (if applicable)
For versions with a luminance meter, the light value is typically uploaded only after the sensor is triggered. If real-time detection is required, you need to set the 'Light Sense Interval Time' in the APP. After setting parameters in the APP, the device needs to be triggered once to synchronize these parameters.
4. Maintenance
To ensure optimal performance and longevity of your MiNi PIR Motion Sensor, follow these simple maintenance guidelines:
- Cleaning: Regularly wipe the sensor's lens and body with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents, as these can damage the device.
- Battery Replacement: When the battery level is low, the device will typically indicate this through the app or a specific LED pattern. Replace the CR2450 battery promptly to maintain continuous operation.
- Environmental Check: Periodically check the installation area to ensure no new obstacles are blocking the sensor's field of view and that it remains free from direct sunlight or strong temperature fluctuations.
5. Troubleshooting
5.1 General Precautions
- Avoid installing the product in areas with obstacles in front of the lens, as this can affect detection accuracy.
- Keep the sensor away from objects that cause rapid temperature changes, such as air conditioners, fans, refrigerators, or ovens.
- Do not expose the product to direct sunlight.
- The wireless communication distance between the sensor and the gateway may be shortened by obstacles like walls.
5.2 Common Issues
- Device not pairing: Ensure the battery insulation film is removed and the battery is correctly inserted. Confirm your Zigbee gateway is in pairing mode and within range. Try re-entering pairing mode on the sensor.
- False alarms: Review the installation location. Ensure there are no moving objects (curtains, pets) within the detection zone if the sensor is placed at a lower height. Avoid areas with strong air currents or rapid temperature changes.
- No detection: Check if the sensor's lens is clean and unobstructed. Verify the battery level. Ensure the sensor is properly connected to the Zigbee gateway.
- Settings not applying: After changing parameters in the APP, the device needs to be triggered once (e.g., by detecting motion) for the new settings to synchronize and take effect.
6. Specifications
| Feature | Specification |
|---|---|
| Product Name | Mini PIR Sensor |
| Wireless Protocol | Zigbee 3.0 |
| Detection Angle | 120° (105° from product table) |
| Detection Distance | ≤6 meters |
| Working Voltage | 3.0V |
| Battery Type | CR2450 |
| Standby Current | 15μA |
| Luminance Meter | 1-3000lux (Only for versions with luminance sensor) |
| Working Temperature | -10°C to 55°C |
| Working Humidity | 10% to 95% RH |
| Product Size | 33mm × 26mm |
| Package Dimensions (L x W x H) | 14cm x 13cm x 5cm |
| Package Weight | 0.035 kg |
7. User Tips
- For optimal motion detection, consider the sensor's placement carefully. High traffic areas benefit from central placement, while specific entry points might require a more focused angle.
- If using the luminance sensor feature, remember to configure the 'Light Sense Interval Time' in your smart home app for real-time updates, otherwise, it will only update upon motion detection.
- Always ensure your Zigbee gateway is updated to the latest firmware for best compatibility and performance with the sensor.
8. Warranty and Support
This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official product page or contact the seller directly. You can also find the full user manual in PDF format at: User Manual (PDF).