LED License Plate Light Instruction Manual

1. Safety Information

Warning & Safety Information:

• ATTENTION: Not suitable for children under three years.
• ATTENTION: Do not swallow small parts, to prevent choking.
• ATTENTION: Do not disassemble the product to prevent electric shock or damage to the vehicle.

2. Product Overview

This product is a pair of XINTUSHENG LED license plate lights designed as a direct replacement for original halogen bulbs in various Seat models. They provide bright white illumination, significantly improving visibility and safety for your vehicle's license plate.

Image: XINTUSHENG LED License Plate Lights shown installed on a vehicle and as individual units with wiring.

Key Features:

• High brightness LED chips with low power consumption.
• No On-Board Computer (O.B.C) error, no bulb-out warning messages, and no computer reprogramming needed.
• 100% waterproof design.
• Designed to fit well with the original car structure.
• Approximately 5 times brighter than standard halogen lights.
• Greatly improves safety and visibility for night driving.

3. Specifications

Image: Product dimensions diagram.

Image: Illuminated LED light highlighting LED source, white emitting color, and ABS+PC material.

4. Installation

The LED license plate lights are designed for a simple plug & play installation, directly replacing your vehicle's original halogen bulbs.

Image: Detailed installation diagram from the instruction manual.

Installation Steps (T10 Connection Method):

1. Locate the Original Equipment (OE) connector for your license plate light.
2. Carefully take off the OE halogen bulb from its socket.
3. Insert our provided connector into the OE socket.
4. Put the OE socket back into the light housing, ensuring a secure fit to avoid any water ingress issues.

For other connector types, the installation process is also plug & play, involving direct replacement of the original bulb and connection to the vehicle's wiring harness.

5. Operation

Once properly installed, the LED license plate lights operate automatically with your vehicle's existing lighting system. They will illuminate when your vehicle's lights are turned on, providing a bright, clear white light to illuminate your license plate.

6. Maintenance

The LED license plate lights are designed for long-term, maintenance-free operation. Their IP67 waterproof rating ensures robust protection against water, snow, and dust, eliminating common corrosion or moisture concerns.

Image: IP67 Waterproof feature highlighting protection against water, snow, and dust.

Periodically, you may inspect the lights for any physical damage or accumulation of dirt or debris. If cleaning is necessary, use a soft, damp cloth to gently wipe the surface. Avoid using abrasive cleaners or solvents that could damage the lens or housing.

7. Troubleshooting

If you encounter any issues with your LED license plate lights, please refer to the following common troubleshooting steps:

• Light Not Working:
  • Check all electrical connections to ensure they are secure and properly seated.
  • Verify that the vehicle's power supply to the license plate light circuit is active (e.g., check fuses if other lights are also out).
  • Ensure the original halogen bulb was fully removed and not causing a short or improper connection.
  • If only one light is out, try swapping it with the working one to determine if the issue is with the LED unit itself or the vehicle's wiring.
• Flickering Light:
  • Ensure all connections are tight and free from corrosion.
  • Verify that the vehicle's voltage is stable and within the specified 9-15V DC range.

If problems persist after troubleshooting, please contact customer support.

8. Warranty and Support

For specific warranty information, technical support, or service inquiries, please refer to your purchase documentation or contact your retailer directly. Please retain your proof of purchase for any warranty claims.