diymore UPS DC12V/15V Power Supply Module

Contents

24W UPS DC12V/15V Power Supply Module User Manual

Model: UPS DC12V/15V Power Supply Module | Brand: diymore

1. Introduction

This manual provides essential information for the safe and efficient use of your diymore 24W UPS DC12V/15V Power Supply Module. This high-power uninterruptible power supply board is designed to provide continuous power to various network devices and other equipment, ensuring uninterrupted operation during mains power outages.

Front and back view of the UPS power supply module

Figure 1: High-Power Uninterruptible Power Supply Board
When the mains power supply is cut off, the module automatically switches to battery power mode to ensure continuous operation of the equipment.

2. Safety Precautions

  • Always ensure correct polarity when connecting power sources and batteries to prevent damage to the module and connected devices.
  • Connect the battery only as the final step in your setup process.
  • The control board may generate heat during operation; ensure it is installed with adequate ventilation and at a safe distance from heat-sensitive components, especially the battery.
  • Use appropriate wire gauges (at least 20AWG) for input and output connections to handle the current safely.
  • Keep the module away from moisture and extreme temperatures.

3. Package Contents

  • 1 x UPS Uninterruptible Power Supply Module

4. Features

  • Automatic Power Switching: When the main power supply is disconnected, the module automatically switches to battery power mode to ensure continuous operation.
  • Smooth Transition: The switching process is smooth and uninterrupted, preventing equipment restarts or data loss.
  • High Output Power: Designed for continuous power supply to devices like routers, cameras, and switches, with an output power of up to 36W when the battery is fully charged.
  • Compact Design: Exquisite and compact appearance with well-arranged components.
  • Reliable Performance: High performance, high efficiency, and multi-faceted protection features make it ideal for applications requiring reliable uninterruptible power.
  • Battery Protection: Self-contained battery charging and discharging protection function.
High Power Uninterruptible Power Supply Boards

Figure 2: High Performance Design
High performance, high efficiency, and a wide range of protection features make them ideal for all types of applications requiring a reliable uninterruptible power supply.

5. Setup and Wiring

5.1 Wiring Instructions

  1. Wire Selection: Use at least 20AWG wire for input and output connections. Keep wire lengths as short as possible (not exceeding 10CM) and as thick as possible to minimize resistance.
  2. Power Input: Connect your DC12V power supply to the 'IN+' (positive) and 'IN-' (negative) terminals.
  3. Load Output: Connect your device requiring power to the 'OUT+' (positive) and 'OUT-' (negative) terminals.
  4. Battery Connection (Last Step): Connect your 3S lithium battery pack (or polymer/18650 battery packs) to the 'BAT+' (positive) and 'BAT-' (negative) terminals. This is a critical step and should always be done last.
  5. Battery Pack Configuration: The module supports 2-wire battery connections (positive and negative). For 4-wire battery packs, you may need to remove resistors R16, R17, and R18 as per your battery pack's requirements.
  6. Indicator Light (Optional): For an external indicator, configure your own 3mm common anode red and green light-emitting diodes.
Wiring diagram for the UPS module

Figure 3: Wiring Diagram
Connect Power Supply Positive (12V) to IN+, Power negative to IN-. Connect Output Positive (12V) to OUT+, Output Negative to OUT-. Connect Battery Pack Positive to BAT+, Battery pack negative to BAT-. Suitable for lithium polymer battery packs, 18650 battery packs, etc.

5.2 Installation Considerations

  • The control board will become warm during operation. Install it at a certain distance from the battery and other heat-sensitive components to ensure proper heat dissipation.
  • Ensure adequate ventilation around the module.

6. Operating Instructions

6.1 Automatic Switching

When the module is connected to both a main DC power supply and a battery pack, it will primarily draw power from the main DC supply. If the main DC power supply is disconnected or fails, the module will automatically and smoothly switch to drawing power from the connected battery pack, ensuring continuous operation of your connected equipment without interruption or data loss.

Automatic switching between charging and discharging

Figure 4: Automatic Switching
Output power of up to 36W when the battery is fully charged. The power supply needs to be sufficient to drive both the load and charging current.

6.2 Indicator Light Functionality

If you have configured an external 3mm common anode red and green LED:

  • Red Light On: Indicates that the battery is currently charging.
  • Green Light On: Indicates that the battery is fully charged.

7. Maintenance

  • Keep the module clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the module to liquids, high humidity, or corrosive environments.
  • Regularly check all connections to ensure they are secure.
  • Ensure proper ventilation to prevent overheating, especially during prolonged operation.

8. Troubleshooting

ProblemPossible CauseSolution
No output powerIncorrect input voltage; loose connections; battery not connected or discharged.Verify input voltage (DC12V); check all wiring connections; ensure battery is properly connected and charged.
Module gets excessively hotOverload; insufficient ventilation.Reduce load on the module; ensure adequate airflow and ventilation around the board.
Battery not chargingMain power supply not connected; faulty battery; incorrect battery type.Check main DC power supply connection; test battery; ensure battery is a 3S lithium, polymer, or 18650 pack.
Equipment reboots during power switchSudden power drop; faulty battery connection.Ensure battery connections are solid; verify battery health and capacity.

9. Specifications

ParameterValue
Input VoltageDC12V
Output VoltageDC12V (between 11V and 13V)
Output Power (MAX)36W
Battery Charging Current (MAX)0.5A
Input CurrentLoad operating current + charging current (0.5A)
Battery Type Compatibility3S Lithium, Polymer, or 18650 battery packs
Dimensions (L x W)57.5mm (2.26in) x 22mm (0.87in)
Dimensions of the UPS module

Figure 5: Module Dimensions
The module measures 57.5mm (2.26in) in length and 22mm (0.87in) in width.

10. Warranty and Support

For warranty information, technical support, or any inquiries regarding your diymore 24W UPS DC12V/15V Power Supply Module, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase records for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.