KINGSOFE H4 Canbus LED Headlight Mini Lens Projector Bulb

Contents

User Manual

KINGSOFE H4 Canbus LED Headlight Mini Lens Projector Bulb

Introduction

Thank you for choosing the KINGSOFE H4 Canbus LED Headlight Mini Lens Projector Bulb. This product is designed to provide superior illumination for your vehicle, featuring an integrated mini projector lens for precise light distribution, a dual cooling system for optimal performance, and IP68 waterproofing for durability in various weather conditions. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED headlights.

Package Contents

  • 2 x H4 LED Headlight Mini Lens Projectors
  • 1 x External Split Drive Module

Specifications

FeatureSpecification
Brand NameKINGSOFE
ModelH4 Canbus LED Mini Lens Projector
Fit Plug TypeH4 / 9003 / HB2 Hi/Lo
Light Source12 CSP Chips (3570 CSP CHIP)
Color Temperature6000K (White)
Wattage120W (per pair)
VoltageDC 12V - 24V
Rated Current1.5A-10A
Beam Angle360 Degree
Cooling SystemDual Cooling (Heat sink structure, Metal substrate, High-speed turbofan)
MaterialAviation Aluminum
Operating Temperature-45℃ ~ +150℃ (-40~+135°C)
Life SpanAbove 60,000 Hours
Waterproof RatingIP68
FunctionCanbus Chips (No error)
OriginMainland China
DimensionsWidth: 36mm (1.4in), Height: 110mm (4.33in), Base Width: 45mm (1.77in)

For detailed specifications, please refer to the User Manual PDF.

Setup and Installation

These LED headlights are designed for a plug-and-play installation, replacing your existing H4 halogen bulbs. Ensure your vehicle's headlight model is H4 before proceeding.

  1. Safety First: Turn off your vehicle's engine and ensure the headlights are cool to the touch. Disconnect the negative terminal of your car battery to prevent electrical shorts.
  2. Access Headlight Assembly: Open the hood and locate the back of your headlight assembly. You may need to remove some covers or components to gain access.
  3. Remove Old Bulb: Disconnect the electrical connector from the existing H4 bulb. Unclip or twist the retaining spring/clip that holds the bulb in place, then carefully remove the old bulb.
  4. Install LED Bulb: Insert the new KINGSOFE H4 LED headlight bulb into the headlight housing, ensuring it is seated correctly and securely. Re-engage the retaining spring/clip. Avoid touching the LED chips directly.
  5. Connect External Drive: Connect the LED bulb's cable to the external split drive module. Then, connect the external drive module's plug to your vehicle's original H4 headlight connector. Ensure all connections are secure.
  6. Test Functionality: Reconnect your car battery. Turn on your vehicle's headlights and test both low beam and high beam functions to ensure they operate correctly. Verify there are no dashboard error messages.
  7. Final Assembly: Reinstall any covers or components removed during the process.

Important Notes:

  • Confirm your vehicle’s headlight model (H4) and application scenario (car/motorcycle) before purchasing to ensure fit.
  • When installing, ensure correct connection of Hi/Lo beam wires to avoid function failure.
Diagram showing the components of the LED headlight: highlight wick, heat dissipation fan, and intelligent chip.

Figure 1: LED Headlight Components (Highlight wick, Heat dissipation fan, Intelligent chip)

Diagram showing the dimensions of the H4 LED headlight bulb and its external driver.

Figure 2: Size Display (Width: 36mm/1.4in, Height: 110mm/4.33in, Base Width: 45mm/1.77in)

Image of the external split drive module for the LED headlight.

Figure 3: External Split Drive Module (Ensures intelligent heat dissipation for longer life)

Video 1: Product Showcase (Demonstrates product features and light output)

Operating Instructions

Your KINGSOFE H4 LED headlights provide both low beam and high beam functionality, integrated into a single bulb with a projector lens for optimal light control.

  • Low Beam: Provides a clear, wide, and safe dipped beam with a sharp tangent cut-off to prevent dazzling oncoming traffic. This is for normal driving conditions.
  • High Beam: Activates an independent lens for a long-range, wide field of view, designed to illuminate the road far ahead for enhanced visibility in dark conditions.
Diagram showing the precise focus of the HD lens for both dipped beam (clear tangent) and high beam (far distance).

Figure 4: HD Lens Uniform Focus (Illustrates clear dipped beam tangent and wide high beam)

Real-world comparison of low beam and high beam light output on a road at night.

Figure 5: Real Shot Effect (Comparison of Low Beam Lights vs. High Beam Lights)

Maintenance

To ensure the longevity and optimal performance of your LED headlights, follow these simple maintenance guidelines:

  • Cleaning: Periodically clean the headlight lenses with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the lens or housing.
  • Inspection: Regularly inspect the bulbs and wiring for any signs of damage, loose connections, or corrosion.
  • Cooling System: Ensure the cooling fan area is free from debris or obstructions to allow for proper heat dissipation.

Troubleshooting

  • Bulb Not Lighting Up:
    • Check all electrical connections to ensure they are secure.
    • Verify the vehicle's headlight fuse is intact.
    • Ensure the external drive module is properly connected.
  • Flickering or Intermittent Operation:
    • This can sometimes be due to voltage fluctuations. Ensure stable power supply.
    • Check for loose wiring or poor contact at the connectors.
  • Dashboard Error Messages (CANBUS Issues):
    • These bulbs are designed with CANBUS chips to prevent errors. If an error occurs, double-check all connections.
    • In rare cases, some highly sensitive vehicle systems may still require an additional CANBUS decoder.
  • One Bulb Out:
    • Swap the non-working bulb with the working one to determine if the issue is with the bulb or the vehicle's wiring.

User Tips

  • Beam Pattern Check: After installation, it is recommended to check your headlight beam pattern against a wall to ensure proper alignment and cut-off. This helps maximize visibility and avoid blinding other drivers.
  • RHD/LHD Compatibility: The product description does not explicitly state compatibility for Right-Hand Drive (RHD) or Left-Hand Drive (LHD) vehicles. While the projector lens provides a clear cut-off, users in RHD countries should verify the beam pattern complies with local regulations after installation.
  • Space Consideration: The mini lens design is space-saving, but always confirm dimensions against your vehicle's headlight housing, especially if space is very limited.

Certifications

This product complies with the following standards:

  • E-Mark
  • CE
  • FCC
  • RoHS
Image displaying CE, FCC, and RoHS compliance certificates.

Figure 6: Product Certifications (CE, FCC, RoHS)

Warranty and Support

Your KINGSOFE H4 Canbus LED Headlight Mini Lens Projector Bulb comes with a 3-Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use.

For further assistance, troubleshooting, or warranty claims, please contact your retailer or the manufacturer's support channel.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur during particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Any changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.