iHseno 24G Radar Zigbee Human Presence Sensor

Contents

iHseno 24G Radar Zigbee Human Presence Sensor Instruction Manual

Model: 24G Radar Zigbee Human Presence Sensor

1. Product Overview

Welcome to the iHseno 24G Radar Zigbee Human Presence Sensor, an advanced device designed for smart homes, commercial spaces, and elderly care. This sensor utilizes 24GHz millimeter-wave radar technology to detect human presence, even when stationary, overcoming the limitations of traditional infrared sensors.

It operates on AAA*2 batteries (not included), providing up to 360 days of battery life (based on 10 reports per day). This sensor is the Zigbee version and requires a Tuya Zigbee gateway for full functionality.

iHseno Human Presence Sensor with batteries and app compatibility logos
Figure 1: iHseno 24G Radar Zigbee Human Presence Sensor and its features.

2. Setup Guide

2.1. Battery Installation

  1. Push the back cover of the sensor upwards to remove it.
  2. Insert two AAA batteries (not included) according to the positive (+) and negative (-) pole markings inside the battery compartment.
  3. Once batteries are inserted, the indicator light on the sensor will flash.
  4. Close the back cover securely.
Diagram showing battery installation and sensor mounting height
Figure 2: Battery installation and recommended mounting height (1.5 meters above ground).

2.2. Sensor Mounting

Use the provided double-sided tape to fix the sensor's base to your desired installation location. Ensure the sensor is securely attached to the base.

2.3. App Download

Download the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.