Product Overview
Thank you for purchasing the LED PIR Motion Sensor Floodlight. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new floodlight. Please read it thoroughly before use and retain it for future reference.

Image: Range of LED PIR Motion Sensor Floodlights (10W, 20W, 30W, 50W, 100W)
1. Setup and Installation
Safety Precautions
- Always disconnect power before installation or servicing.
- Ensure the power cord connection parts are insulated and waterproof.
- Keep the light away from corrosive, flammable, or explosive environments.
- Ensure the voltage does not exceed the rated voltage range (refer to specifications).
- All electrical work should be performed by a qualified electrician if you are unsure.
Package Contents
Please check the attached accessories. If any parts are missing, contact your seller.
Wiring Instructions
The power cord specification is 0.5mm 3-core waterproof cable (brown, blue, green-yellow), qualified by CCC Certification.
- Connect the input power cords of the floodlight to the single-phase power supply according to the color corresponding principle:
- Live Wire: Brown
- Neutral Wire: Blue
- Ground Wire: Green-Yellow
- Ensure the connection is correct and reliable.

Image: Wiring Diagram (Brown: Live, Blue: Neutral, Green-Yellow: Ground)
Mounting Methods
Use the attached fasteners to fix the product's movable bracket onto the desired surface. Ensure the fastening parts are strong and stable to prevent accidents.
- Mount on the wall: Secure the bracket to a vertical surface.
- Mount on the ceiling: Secure the bracket to an overhead surface.
- Mount into the ground: Use appropriate ground stakes or fixtures (not included) to secure the bracket in the ground.
Adjusting the Lighting Angle
Rotate the movable bracket of the floodlight to adjust the proper lighting angle. Once the desired angle is achieved, lock the screws on both sides of the bracket firmly.

Image: PIR Sensor with adjustable settings (SENS, TIME, LUX) and bracket showing 360° rotation, 180° tilt, and 120° sensing angle.
Finalizing Installation
Once mounted and wired, plug into the power supply to light up the unit. The installation is complete.
2. Operating Instructions
Initial Power-On
After installation, connect the switch according to the wiring diagram, turn on the power, and the floodlight will begin to work. When detecting human activity, the light will turn on automatically.
PIR Motion Sensor Settings
The PIR sensor has three adjustable knobs:
- SENS (Sensitivity): Adjusts the sensor detection range from 2 to 10 meters.
- TIME (Time Delay): Adjusts how long the light stays on after motion is no longer detected, from 10 seconds to 3 minutes (10s-12mins as per PDF). This delay time starts after you move out of the detection range.
- LUX (Light Sensor): Adjusts the ambient light level at which the sensor becomes active.
- Sun symbol: The sensor will operate during both day and night.
- Moon symbol: The sensor will only operate at night (in low light conditions).

Image: Illustration of automatic sensing: light turns on when a person arrives and turns off when they leave.
Product Overview Video
Video: A short demonstration of the LED Induction Floodlight's features and automatic operation.
3. Maintenance
- Cleaning: Periodically clean the floodlight's surface and sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly check the power cable and connections for any signs of wear, damage, or loose connections.
- Sensor: Ensure the sensor lens is clear of obstructions (e.g., dirt, spiderwebs) for optimal performance.
4. Troubleshooting
- Light does not turn on:
- Check if the power supply is connected and active.
- Verify wiring connections are secure and correct.
- Adjust the LUX setting to ensure it's not set to 'night only' during daytime, or if it's too dark for the 'day/night' setting.
- Check the SENS setting; increase sensitivity if motion is not being detected.
- Light stays on continuously:
- Ensure there is no continuous motion within the sensor's detection range.
- Check if the TIME setting is too long.
- Verify the sensor is not obstructed or faulty.
- Light flickers:
- Check for loose wiring connections.
- Ensure stable power supply.
5. Specifications
| Feature | Description |
|---|---|
| Item Type | Flood Lights |
| Body Material | Aluminum |
| Finish | Iron |
| Protection Level | IP66 (Waterproof) |
| Style | Modern Style |
| Light Source | LED bulbs (SMD2835 Beads) |
| Voltage | 220 V |
| Power Source | AC |
| Is Bulbs Included | No (Integrated LEDs) |
| Origin | Mainland China |
| Occasion | Outdoor Wall |
| Certification | RoHS, CE |
| High-concerned chemical | None |
| Feature | Description |
|---|---|
| Luminous Flux | 249-2000 Lumens (depending on wattage) |
| Color Temperature | 6000K (Cold White) |
| CRI (Color Rendering Index) | 80 |
| Sensing Range | 2-10 Meters |
| Sensing Angle | 180° |
| Sensing Time (Adjustable) | 10s-3mins |
| Sensing Method | IR (Infrared) |
Product Dimensions (Approximate)

Image: Approximate dimensions for 10W, 20W, 30W, 50W, and 100W models.
6. User Tips
- Wattage Selection: For general use, 30W is often sufficient. For very bright illumination, 50W provides light comparable to daylight.
- Garage Use: These floodlights are ideal for garages, automatically illuminating when you enter, especially useful when carrying items.
- Sensor Range: The motion sensor generally functions effectively from a good distance. Adjust the 'SENS' knob to fine-tune the detection range.
- Power Cable Length: Be aware that the power cable may be relatively short, so plan your installation location or prepare for an extension/junction box.
7. Warranty and Support
For warranty information, returns, or technical support, please contact the seller or retailer from whom you purchased this product. Keep your purchase receipt as proof of purchase.