1. Important Safety Information
Please read all instructions carefully before using the Tomshine LED Floor Lamp. Failure to follow these instructions may result in product damage or personal injury. Keep this manual for future reference.
- Keep the device and its power cord out of reach of children.
- Do not use this product for purposes other than its intended use as a floor lamp.
- Inspect the product before each use; do not use if any part is damaged.
- Follow all installation and operation guidelines to avoid injury.
- Do not expose the lamp to water or excessive moisture.
- Handle with care to avoid cuts or injuries during assembly or adjustment.
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
- Unplug the lamp from the power outlet before cleaning or performing any maintenance.
2. Package Contents
- LED Floor Lamp (unassembled)
- Remote Control
- User Manual (this document)
3. Assembly and Setup
The Tomshine LED Floor Lamp requires simple assembly before first use.
- Carefully unpack all components from the packaging.
- Connect the pole sections by screwing them together clockwise until secure.
- Attach the assembled pole to the base by screwing it clockwise until firmly tightened.
- Ensure the lamp head is securely attached to the top pole section.
- Place the lamp on a stable, flat surface.
- Plug the power cord into a standard electrical outlet (90-260V).
Figure 1: Lamp Dimensions and Rotatable Head. The lamp head can rotate 360 degrees for flexible lighting. Cable length is 1.8m (5.91ft).
4. Operating Instructions
The Tomshine LED Floor Lamp can be controlled via the touch panel on the lamp pole or the included remote control.
4.1. Touch Control Panel
The touch control panel is located on the lamp pole and features the following buttons:
- Power Button: Press to turn the lamp On/Off.
- Brightness Up (+): Press to increase brightness.
- Brightness Down (-): Press to decrease brightness.
- Mode Button (M): Press to cycle through different color temperatures.
Figure 2: Lamp with Touch Control Panel. The panel allows for basic power, brightness, and color temperature adjustments.
4.2. Remote Control
The remote control offers comprehensive control over the lamp's functions.
Figure 3: Lamp with Remote Control. The remote provides access to all lighting features and scene modes.
- Power Button: Turns the lamp On/Off.
- 1H Timer Button: Activates a 1-hour timer, after which the lamp will turn off automatically.
- Brightness Up/Down Buttons (+/-): Adjusts the brightness level steplessly.
- Color Temperature Up/Down Buttons (Sun icons): Adjusts the color temperature through 4 available settings.
- Scene Mode Buttons (Book, Moon, Work, Leisure icons): Selects one of the 6 pre-set scene modes for different activities.
4.3. Color Temperature and Dimming
The lamp offers 4 distinct color temperatures and stepless dimming to suit various needs and preferences.
- Color Temperatures: 3000K (Warm White), 4000K (Natural White), 5000K (Cool White), 6000K (Daylight White).
- Dimming: Adjust brightness from 100% down to 25% or lower, steplessly, for optimal illumination.
Figure 4: Color Temperature and Brightness Levels. Choose from various light settings for reading, relaxing, or working.
The lamp head is 360° rotatable, allowing you to direct light precisely where needed. Its anti-glare design ensures eye comfort, reducing strain during extended use.
Figure 5: Eye-Caring Design. The lamp provides anti-glare illumination to prevent eye strain.
5. Maintenance and Care
- Cleaning: Ensure the lamp is unplugged before cleaning. Use a soft, dry cloth to wipe the lamp body and head. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
- Storage: If storing the lamp for an extended period, turn it off, unplug it, and store it in a dry place away from direct sunlight and extreme temperatures.
- General Care: Avoid placing heavy objects on the lamp or its cord. Do not attempt to disassemble or repair the lamp yourself; contact qualified personnel if service is required.
6. Troubleshooting
If you encounter any issues with your Tomshine LED Floor Lamp, please refer to the following common solutions:
- Lamp does not turn on:
- Ensure the power cord is securely plugged into a working electrical outlet.
- Check if the outlet is receiving power (e.g., by plugging in another device).
- Remote control not working:
- Ensure there are no obstructions between the remote control and the lamp.
- Check if the remote control's battery needs replacement (if applicable, though typically integrated for this type of product).
- Try operating the lamp using the touch control panel to confirm the lamp itself is functional.
- Light flickers or is dim:
- Ensure the lamp is receiving stable power.
- Adjust the brightness settings using either the touch panel or remote control.
If the problem persists, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Tomshine |
| Model | LED Floor Lamp |
| Power Source | AC |
| Voltage | 90 - 260 V |
| Luminous Flux | 2000 - 82000 Lumens |
| Color Temperatures | 3000K, 4000K, 5000K, 6000K |
| Dimming | Stepless |
| Control Methods | Touch Control, Remote Control |
| Scene Modes | 6 Pre-set modes |
| Lamp Head Rotation | 360° |
| Body Material | Iron |
| Shade Type | Shadeless |
| Overall Height | 1620 mm (5.3 ft) |
| Base Diameter | 200 mm (7.87 in) |
| Lamp Head Dimensions | 113 mm (L) x 65 mm (W) |
| Cable Length | 1.8 m (5.91 ft) |
| Product Weight | Approx. 2.618 kg |
| Application | Bedroom, Living Room, Office |
8. User Tips
No specific user tips were available from customer reviews or Q&A for this product.
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Tomshine LED Floor Lamp, please contact the seller or the official Tomshine customer service channel where you purchased the product. Please have your purchase details ready when contacting support.