RUNTOIN Modern LED Ceiling Chandelier 2Rings

Contents

Modern LED Ceiling Chandelier User Manual

Model: Modern LED Ceiling Chandelier 2Rings

Brand: RUNTOIN

Introduction

Thank you for purchasing the RUNTOIN Modern LED Ceiling Chandelier. This smart lighting fixture is designed to provide versatile illumination for your home, featuring dimmable functionality, adjustable color temperature, and smart control capabilities. Please read this manual carefully before installation and use to ensure safe and optimal performance.

1. Setup

1.1 What's in the Box

  • LED Ceiling Chandelier Fixture
  • Mounting Hardware (screws, wall plugs, hanging plate)
  • User Manual (this document)

1.2 Safety Information

  • WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
  • Ensure the power supply voltage matches the fixture's requirements (90-260V).
  • All wiring connections must be made in accordance with local and national electrical codes.
  • If you are unsure about electrical installations, consult a qualified electrician.
  • Do not install on a wet surface or near water.

1.3 Installation Instructions

Follow these steps carefully to install your ceiling light. Refer to the diagram below for visual guidance.

Installation diagram for ceiling light

Image Description: This image displays a table of product specifications for "Aisle light" and detailed installation instructions with diagrams. The installation section shows steps for mounting the hanging plate and securing the fixture.

  1. Prepare the Hanging Plate: Release the two screws on both sides of the hanging plate and carefully remove the hanging plate from the fixture.
  2. Mark Installation Location: Plan the desired location on the wall or ceiling for the fixture. Mark the positions for drilling the mounting holes.
  3. Drill Holes and Install Wall Plugs: Drill two holes at the marked positions. Insert the provided wall plugs into these holes.
  4. Secure Hanging Plate: Align the hanging plate with the drilled holes. Fix the hanging plate to the wall/ceiling using screws. Ensure it is securely fastened.
  5. Connect Wiring: Connect the household electrical wires to the fixture's wires. Ensure proper polarity (Live to Live, Neutral to Neutral, Ground to Ground if applicable). Use appropriate wire connectors.
  6. Mount the Fixture: Carefully align the lamp fixture with the hanging plate. Fix the lamp fixture onto the hanging plate by screwing screws tightly on both sides until the fixture is secure.
  7. Test: Restore power and test the light fixture.

2. Operating Instructions

2.1 Powering On/Off

Turn the light on or off using your wall switch or the provided remote control.

2.2 Adjusting Brightness and Color Temperature

This fixture supports dimming and color temperature adjustment. You can switch between Cold White, Natural White, and Warm White light to suit your mood or activity.

Ceiling light showing Cold White, Natural White, and Warm White illumination

Image Description: This image illustrates the ceiling light emitting different color temperatures: Cold White (left), Natural White (center), and Warm White (right), demonstrating its versatility.

Use the remote control or the connected smart app to adjust these settings.

2.3 Smart Control Features

Your ceiling light is a smart device compatible with various smart home platforms. It can be controlled via:

Ceiling light with smart home compatibility icons

Image Description: The main product image showing the ceiling light installed in a living room, with an overlay indicating compatibility with Tuya, Smart Life, Alexa, Google Assistant, and IFTTT.

  • Mobile App: Download the "Tuya" or "Smart Life" app from your smartphone's app store. Follow the in-app instructions to pair your light fixture.
  • Voice Control: Once paired with the app, you can link it to voice assistants like Amazon Alexa or Google Assistant for hands-free control.
  • IFTTT: Integrate with IFTTT (If This Then That) for custom automation routines.

Refer to the specific app's user guide for detailed pairing and control instructions.

3. Maintenance

To ensure the longevity and appearance of your ceiling light:

  • Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Bulb Replacement: This fixture uses integrated LED bulbs which are designed for long life and are not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.

4. Troubleshooting

  • Light does not turn on:
    • Check if the power supply is connected and the wall switch is on.
    • Ensure all wiring connections are secure.
    • Check your circuit breaker or fuse box.
  • Light flickers:
    • Ensure the voltage supply is stable and within the specified range.
    • Check for loose wiring connections.
  • Smart features not working:
    • Ensure your Wi-Fi network is active and the signal is strong where the light is installed.
    • Verify the light is correctly paired with the Tuya/Smart Life app.
    • Check if your voice assistant (Alexa/Google Assistant) is properly linked to the smart app.
    • Try resetting the light fixture (usually by cycling power on/off several times) and re-pairing it.
  • Remote control not working:
    • Check the battery in the remote control.
    • Ensure there are no obstructions between the remote and the light fixture.

5. Specifications

Dimensions diagram of the ceiling light

Image Description: A diagram illustrating the physical dimensions of the ceiling light: 330mm (13 inches) in overall diameter, 200mm (7.9 inches) for the inner ring, and 130mm (5.1 inches) in height.

FeatureDetail
Brand NameRUNTOIN
ModelModern LED Ceiling Chandelier 2Rings
Voltage90 - 260 V
Power SourceAC
Light SourceLED bulbs (Included)
Is DimmableYes
Luminous Flux2000-82000 (Range)
Is Smart DeviceYes
Switch TypeRemote Control
Body MaterialIronware + Acrylic
FinishPolishing
TechnicsPlated
Installation MethodAssembly, Surface mounted
Application AreasKitchen, Dining Room, Bedroom, Foyer, Study, Bathroom, Exhibition Hall, Corridor, Balcony
CertificationsCCC, CE, EMC, FCC, UL
Product Dimensions (Approx.)Diameter: 330mm (13in), Inner Ring Diameter: 200mm (7.9in), Height: 130mm (5.1in)
Package Dimensions (Approx.)Length: 39cm, Width: 36cm, Height: 13cm
Package Weight (Approx.)0.849 kg

6. Warranty and Support

This RUNTOIN LED Ceiling Chandelier comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For further detailed instructions, diagrams, or support, you may refer to the official user manual PDF available at: User Manual (PDF).

7. User Tips

No specific user tips were available from provided reviews or Q&A content. However, general tips for smart lighting include:

  • Ensure your Wi-Fi network is 2.4GHz for initial pairing, as many smart devices do not support 5GHz.
  • Keep your smart home app updated to the latest version for optimal performance and security.
  • Consider creating lighting scenes in your app for different activities (e.g., "Reading Mode" with cool white light, "Relax Mode" with warm white light).

© RUNTOIN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.