AMBITFUL GM-150

Contents

Ambitful GM-150 Professional Foldable Tripod User Manual

Model: GM-150

1. Product Overview

The Ambitful GM-150 is a professional, foldable aluminum tripod designed for a wide range of devices including DSLR cameras, mirrorless cameras, smartphones, action cameras, camcorders, and LED lights. It features a versatile design with a horizontal center column, 360-degree panoramic shooting capabilities, and adjustable height up to 158cm.

Ambitful GM-150 Tripod with accessories

Figure 1: Ambitful GM-150 Tripod and included accessories.

2. What's Included

Please check the package contents upon unboxing:

  • Tripod x 1
  • Carry Bag x 1
  • User Manual x 1
Package contents of Ambitful GM-150 Tripod

Figure 2: Contents of the Ambitful GM-150 package.

3. Setup Instructions

Follow these steps to set up your Ambitful GM-150 tripod:

  1. Unfold the Tripod: Gently spread the tripod legs until they are fully extended and stable.
  2. Adjust Leg Height: Use the flip locks on each leg section to extend or retract the legs to your desired height. Ensure all flip locks are securely fastened after adjustment.
  3. Attach Quick Release Plate to Device:
    • Locate the quick release plate on the tripod head.
    • Press the release lever to detach the quick release plate from the tripod head.
    • Screw the 1/4-inch screw on the quick release plate into the tripod mount of your camera, smartphone holder, or other compatible device. Tighten securely.
  4. Mount Device to Tripod: Slide the quick release plate with your device back into the tripod head until it clicks into place. Ensure it is firmly seated.
  5. Adjust Tripod Head: Use the handle and adjustment knobs on the hydraulic head to pan, tilt, and rotate your device to the desired angle. The built-in bubble level helps ensure horizontal alignment.
  6. Extend Center Column (Optional): Loosen the center column lift knob and pull up the center column for additional height. Tighten the knob to secure. The center column can extend up to 33cm.
  7. Utilize Horizontal Center Column (Optional): For overhead shots or unique angles, the center column can be reoriented horizontally. Loosen the center column knob, remove the column, and reinsert it horizontally through the tripod base.
  8. Use Gravity Hook: For added stability, especially in windy conditions, hang a weight (e.g., your camera bag) from the gravity hook located at the bottom of the center column.

Video 1: Demonstration of tripod setup and features.

Detaching the quick release plate

Figure 3: Spring-loaded quick release plate for easy attachment and detachment.

4. Operating the Tripod

4.1. Height Adjustment

The tripod offers flexible height adjustments from 51cm (folded) up to 158cm (fully extended). Use the flip locks on the 4-section legs for quick and secure height changes.

Tripod height adjustment up to 158cm

Figure 4: Max height adjustable to 158cm for various shooting needs.

4.2. Shooting Modes and Angles

The GM-150 tripod supports various shooting angles and modes:

  • 360° Panoramic Shooting: The hydraulic head allows for smooth 360-degree rotation for panoramic shots.
  • 90° Vertical Shooting: Easily adjust the head for portrait orientation.
  • Low Angle Shooting: Extend the legs minimally or reverse the center column for ground-level shots.
  • High Angle/Overhead Shooting: Utilize the fully extended height and the horizontal center column for unique top-down perspectives.
  • Side Shots: The flexible head structure allows for various side-angle compositions.
Various shooting angles and modes

Figure 5: Supports 360° panoramic, 90° vertical, low, and high-angle shooting.

Examples of low-turned, upturned, horizontal, and side shots

Figure 6: Examples of diverse shooting perspectives.

4.3. Wide Compatibility

The tripod is designed with standard 1/4-inch screws, making it compatible with a broad range of devices:

  • Digital Cameras
  • Mirrorless Cameras
  • DSLR Cameras
  • Video Camcorders
  • Action Cameras (e.g., GoPro)
  • Smartphones (up to 7.2 inches with appropriate holder)
  • Projectors
  • LED Lights
  • Conference Cameras / Security Cameras
Wide compatibility with various devices

Figure 7: Max load capacity of 3kg and wide device compatibility.

5. Maintenance

  • Cleaning: Wipe the tripod with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
  • Lubrication: The moving parts are designed for smooth operation. Do not apply oil or grease unless specifically recommended by the manufacturer, as this can attract dust and dirt.
  • Storage: Store the tripod in its carry bag in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all locks are disengaged or loosely fastened during storage to prevent stress on the mechanisms.
  • Inspection: Periodically check all screws, locks, and joints for tightness. Tighten any loose components carefully.

6. Troubleshooting

  • Tripod Instability: Ensure all leg sections are fully extended and their flip locks are securely fastened. Make sure the tripod is placed on a flat, stable surface. Use the gravity hook with a weight for added stability.
  • Camera Not Secure: Verify that the quick release plate is properly attached to your camera and fully seated into the tripod head with an audible click. Ensure the 1/4-inch screw is tightly fastened to your device.
  • Head Movement Not Smooth: Check if all adjustment knobs on the hydraulic head are sufficiently loosened for movement. If movement is still stiff, clean any visible dust or debris from the joints.
  • Leg Locks Sticking: Clean the flip lock mechanisms to remove any dirt or grit that might be causing them to stick. Do not force them.

7. Specifications

FeatureSpecification
Model NumberGM-150
MaterialAluminum Alloy
Head TypeHydraulic Head
Max Extended Length1580mm (158cm)
Folded Length510mm (51cm)
Net Weight1.2kg (2.7lb)
Max Load Capacity3kg (6.6lb)
Leg Sections4
Tube DiameterΦ24/20/16/13mm (Thickest 30mm)
Mounting ScrewUniversal 1/4-inch
OriginMainland China
GM-150 Standard Specifications

Figure 8: Detailed specifications for the GM-150 tripod.

8. User Tips

  • Always ensure your camera or device is securely mounted before letting go.
  • When adjusting height, extend the thickest leg sections first for maximum stability.
  • Use the bubble level to ensure your horizon is straight, especially for landscape photography.
  • For long exposures or in windy conditions, use the gravity hook and a remote shutter release to minimize camera shake.
  • Practice adjusting the tripod head and leg locks to become familiar with its operation for quick setup in the field.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original retailer or the Ambitful customer service department. Keep your purchase receipt as proof of purchase.

© 2023 Ambitful. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.