1. Introduction
Thank you for choosing the AVACOM Modern Indoor Wall Light with Motion Sensor. This smart sensing wall lamp provides a soft, non-glare glow, perfect for living rooms, hallways, bedrooms, and staircases. Its magnetic mounting and motion-sensing capabilities offer convenience and energy efficiency.

2. Package Contents
Please check the package for the following items:
- Wall Light Unit(s)
- Remote Control
- Magnetic Mounting Discs (for non-iron surfaces)
- Type-C Charging Cable (not explicitly listed but implied for charging)

3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | AVACOM |
| Item Type | Wall Lamps |
| Light Source | LED bulbs |
| Is Bulbs Included | Yes |
| Is Dimmable | Yes |
| Is Smart Device | No |
| Power Source | DC |
| Voltage | 5V |
| Luminous Flux | <60 |
| Body Material | ABS |
| Installation Method | Self-contained (Magnetic) |
| Certification | CE, ROHS |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 13 cm x 7 cm x 5 cm |
| Package Weight | 0.119 kg |
4. Important Safety Instructions
Please read and follow these safety instructions carefully to prevent injury or damage:
- First Use: Fully charge the battery before using the lamp for the first time. Failure to do so may prevent it from lighting up due to circuit protection (protection is automatically removed after charging).
- Charging: Do not use a charging device with an output voltage greater than 5V/1A to charge the lamp. Use a phone charging adapter with safety certification.
- Usage While Charging: Do not use the lamp while it is charging.
- Environment: Keep the lamp away from sources of fire. Do not use it in humid or high-temperature environments.
- Children: Do not let children use or touch this product.
- Maintenance: Do not attempt to repair or replace any parts of the lamp yourself.
5. Setup and Installation
The AVACOM Wall Light features magnetic mounting for easy installation without drilling or wiring.
5.1. Installation on Ironwork Surfaces
The lamp has built-in magnets. Simply attach it directly to any ironwork surface (e.g., metal door frames, shelves).
5.2. Installation on Non-Ironwork Surfaces
For non-metallic surfaces, use the provided magnetic discs:
- Place the metal plate (magnetic disc) on the back of the cabinet light, ensuring it aligns with the magnet on the light unit.
- Remove the protective film from the metal plate.
- Affix the metal plate to a clean, non-ironwork surface where you wish to install the light.
- Press the metal plate firmly for at least 3 seconds to ensure it sticks securely to the surface.
- Attach the cabinet light to the installed metal plate.

6. Operation
Your wall light can be operated using the physical switch on the unit or the included remote control.
6.1. Using the Physical Switch
The switch on the lamp unit has three positions:
- OFF: Turns the light off.
- ON: Constant light mode. The light will stay on continuously.
- AUTO: Automatic mode (motion sensing).
Day/Night Mode (in AUTO sensing mode only)
When the switch is set to AUTO, you can toggle between day and night sensing modes:
- Day Mode: Click the light once. The light will turn on automatically when someone passes by, regardless of ambient light.
- Night Mode: Click the light twice. The light will turn on only when someone passes by in dim light conditions.
Brightness Adjustment / Light Control Key (when in ON mode)
- Brightness Adjustment: When the lamp is in constant ON mode, press and hold the brightness adjustment key to adjust brightness from 10% to 100%.
- Color Control: When the lamp is in constant ON mode, click the light control key to switch between ten lighting colors and two color-changing modes.
Sensing Range and Induction Time
- Sensing Range: 0-3 meters with a 120° sensing angle. The light will turn on automatically when someone approaches within this range.
- Induction Time: You can select the delay time for the light to stay on after motion is detected: 20, 30, or 60 seconds. The lamp will automatically turn off after the selected time when the person leaves the sensing area.
Charging Indicator
- When the lamp is charging, the sensor light will glow red.
- When the lamp is fully charged, the sensor light will glow green.
6.2. Using the Remote Control
The remote control provides full functionality for your wall light.

Remote Control Instructions:
- First Use: The remote control comes with a battery insulator. Please remove the insulating paper from under the remote control before using it for the first time.
- Power On/Off: Use the ON/OFF buttons.
- Sensing Modes: Buttons for