HoldPeak YXI256

Contents

User Manual: Wireless Thermal Imaging Camera

Model: YXI256 | Brand: HoldPeak

1. Introduction

Thank you for choosing the HoldPeak YXI256 Wireless Thermal Imaging Camera. This device is designed to provide clear thermal imaging, allowing for unrestricted vision and making it an all-in-one assistant for daily work, home life, and adventure travel. It connects wirelessly to your smartphone (iOS and Android) to display and analyze thermal data. Please read this manual thoroughly before using the device to ensure safe and optimal performance.

Wireless Thermal Imaging Camera connected to a smartphone, displaying a thermal image of an object.
Figure 1: HoldPeak YXI256 Wireless Thermal Imaging Camera connected to a smartphone.

2. Safety Instructions

To protect yourself and others from injury, and to prevent damage to your device, please read all the information below before using your device.

2.1. Notes

  • Do not direct the equipment at very high intensity thermal radiation sources, such as the sun, lasers, or spot welders, as this may cause damage to the equipment.
  • Do not use or store the instrument in an environment that exceeds the permitted operating or storage temperature.
  • Avoid knocking, throwing, or vibrating the instrument and accessories to prevent damage.
  • Do not touch the device or USB port with wet hands to avoid damage.
  • Do not use dissolved or similar liquids on the equipment and cables, as this may cause damage.
  • Wiping the device:
    • Non-optical surfaces: Use a clean and soft cloth.
    • Optical surfaces (lens): Avoid staining the lens surface, especially touching it with bare hands, as sweat may corrode the optical coating. If contaminated, carefully wipe with professional lens paper.
  • When using the equipment, try to keep it stable and avoid violent shaking.
  • This product may emit a slight "click" sound during operation. This is the "shutter refresh" sound of the lens and is normal.

2.2. Warnings

  • If you observe smoke, sparks, or a burnt odor during use, immediately stop using the product. To ensure personal safety, power off the device.
  • Do not charge the device with wet hands; this poses a risk of electric shock.
  • If the adapter or USB cable is damaged, stop using it immediately. A damaged adapter or USB cable may cause fire due to overheating or short circuit.
  • If the device is not used for a long time, store it in a cool and dry environment and charge it regularly. Failure to do so may exhaust the power and shorten battery life.
  • Do not disassemble the equipment. Disassembly may cause damage and forfeit warranty rights. For faults, contact the company for professional maintenance.

3. Product Overview

3.1. Device Components

Diagram of the thermal imaging camera with labeled parts including IR Resolution, Visible Camera, Work Indicator Light, Button, Type-C USB port, Lanyard Hole, Clip Buckle, and Tripod Fixing Screw Hole.
Figure 2: Key components of the HoldPeak YXI256 Thermal Imager.

The device features a 256x192 IR resolution lens, a visible camera, a work indicator light, and a main button. It connects via a Type-C USB port and includes a lanyard hole, clip buckle, and a tripod fixing screw hole for versatile use.

3.2. Display Illustration (via Smartphone App)

Smartphone screen displaying thermal image with temperature readings, showing palette, measure, temp range parameters, and image options.
Figure 3: Example of the thermal image display on a smartphone app.

The smartphone app displays the thermal image along with various parameters and controls:

  • Temperature Readings: Center, highest, and minimum temperature values.
  • Measurement Points: Tracking for lowest and highest temperature points, and the center point of the image.
  • Date and Time: Current date and time.
  • Battery Indicator: Device battery level.
  • Pseudo Color Bar: Scale indicating temperature range.
  • Measurement Distance: Distance to the measured object.
  • Emissivity: Current emissivity setting.

4. What's in the Box?

Contents of the product package: Mobile Wireless Imager, Package Box, User Guide, Type-C Cable, Wrist Strap.
Figure 4: Package contents of the HoldPeak YXI256.

The standard package includes:

  • 1 x Mobile Wireless Imager (YXI256)
  • 1 x Package Box
  • 1 x User Guide
  • 1 x Type-C Cable
  • 1 x Wrist Strap

5. Specifications

ParameterValue
ModelYXI256
Detector TypeVOx Uncooled Microbolometer
IR Resolution256x192
IR Wavelength Range8-14µm
Pixel Spacing12µm
Focal Length3.5mm
Spatial Resolution (IFOV)3.43mrad
Frame Rate25Hz
Thermal Sensitivity (NETD)≤40 mK (@25 °C, F#1.0)
Focal Adjustment ModeFixed focal
Field Angle50°×37.2°
Temperature Range-20°C to 550°C (-4°F to 1022°F)
Temperature Accuracy±2°C or ±2% of reading (whichever is greater)
Minimum Scale0.1°C
Temperature Unit°C/°F/K
Power TypeCharger
Battery1100mAh Polymer Battery (Non-removable)
Charge Time≤4h
Work Time≥6h
Data InterfaceType-C
Storage Memory16G
Operating Temperature-10°C to 50°C
Operating Humidity10%~90%RH (non-condensing)
Storage Temperature-20°C to 60°C
IP RatingIP54
CertificationsCE, FCC, RoHS
Device Weight392g
Device Size231mm × 79.2mm × 84.9mm (9.09in × 3.12in × 3.34in)
Key features of the Mobile Wireless Thermal Imager: -20°C to 550°C Temperature Range, Photo/Video, 6 Color Palettes, Multi-Languages OS, No Focusing Required, IP54 Rating.
Figure 5: Overview of the YXI256's main features.

6. Setup

6.1. Charging the Device

Before first use, ensure the device is fully charged using the provided Type-C cable and a compatible charger. The work indicator light will show charging status.

6.2. Connecting to your Smartphone

  1. Install the App: Download and install the dedicated thermal imaging app from your smartphone's app store. The app is compatible with Android 10.0 and iOS 12.0 or above.
  2. Power On: Press and hold the power button on the thermal imager to turn it on.
  3. Connect: The device connects wirelessly to your smartphone. Ensure Bluetooth or Wi-Fi (depending on the app's connection method) is enabled on your phone. Follow the in-app instructions to pair the device.
  4. Secure Attachment: Use the clip buckle to securely attach the thermal imager to your smartphone, ensuring the camera lens is unobstructed.

7. Operating Instructions

7.1. Basic Button Functions

ButtonCurrent StatusShort Press ActionLong Press Action
Power ButtonPower off-Power on
Main interfaceSleep screen/wake upPower off
Menu interfaceGo backPower off
OK ButtonMain interfaceEnter menuTurn on/off fill light
MENUOKDelete photo/video files
Page UPMain interfaceSwitch pseudo colorShutter calibration
MENUUpwardContinuous upward
Page DOWNMain interfaceSwitch image modeSwitch fusion ratio
MENUDownwardContinuous downward
Trigger KeyMain interfaceTake picturesPicture recording
MENU--

7.2. App Menu Settings

Access the menu via the app interface to configure various settings:

  • Auto Power Off: Set the device to power off after 5, 10, 20, or 30 minutes of inactivity, or disable it.
  • Brightness: Adjust screen brightness (low, medium, high).
  • Language Selection: Choose from 10 supported languages including English, Simplified Chinese, Traditional Chinese, Russian, Japanese, German, French, Italian, Korean, and Polish.
  • Unit: Switch temperature units between Celsius (°C), Fahrenheit (°F), and Kelvin (K).
  • Measure Parameters:
    • Ambient Temperature: Set range from -10°C to 50°C.
    • Measurement Distance: Set range from 0.3m to 3m.
    • Emissivity: Set range from 0.01 to 1. Refer to the "Common Emissivity Table" for typical values.
  • Temperature Range: Switch between low range (-20°C to 150°C) and high range (100°C to 550°C).
  • Temperature Alarm:
    • High Temp Alarm: Turn on/off, set range -20°C to 550°C.
    • Low Temp Alarm: Turn on/off, set range -20°C to 550°C.
    • Alarm Auto Photo: Turn on/off automatic photography when an alarm triggers. Configure capture interval (5s to 30s) and number of captures (1 to 50).
  • Time Settings: Set date, time, and time format.
  • Display Settings: Toggle display of highest/lowest temperature, center point, emissivity, measurement distance, date, and pseudo color bar.
  • LED: Turn on/off the fill light.
  • Fusion Correction: Adjust the overlap of fused images.
  • Restore Factory Settings: Reset all settings to default.
  • Format: Format the device's internal storage.
  • About Equipment: View model, firmware version, application version, serial number, and disk capacity.

7.3. Measurement Modes

Three measurement modes: Point Measure for instant spot reading, Line Analysis for max/min temp on a line, and Area Scan to identify area temp differences.
Figure 6: Three primary measurement modes available in the app.

The app offers three distinct measurement modes for detailed thermal analysis:

  • Point Measure: Provides an instant spot reading of temperature at a specific point.
  • Line Analysis: Displays maximum and minimum temperatures along a user-defined line.
  • Area Scan: Identifies temperature differences within a selected area, highlighting hot and cold spots.

7.4. Color Palettes and Image Modes

Six color palettes (White Hot, Black Hot, Rainbow, Iron Red, Red Heat, Fusion) and four image modes (Visible Light, Picture-in-Picture, Infrared, Fusion).
Figure 7: Available color palettes and image modes for thermal visualization.

The device supports various color palettes and image modes to suit different inspection scenarios:

  • Color Palettes: White Hot, Black Hot, Rainbow, Iron Red, Red Heat, Fusion. These allow you to visualize temperature differences in various color schemes.
  • Image Modes:
    • Visible Light: Standard optical image.
    • Picture-in-Picture: Thermal image overlaid on a visible light image.
    • Infrared: Pure thermal image.
    • Fusion: Blended thermal and visible light image for enhanced detail.

7.5. High and Low Temperature Alarm

Smartphone screen showing a thermal image with high and low temperature alarm thresholds, triggering an alarm and automatically capturing a photo.
Figure 8: High and Low Temperature Alarm in action.

The device can be configured to trigger alarms when temperatures exceed or fall below preset thresholds. When an alarm is triggered, the device will provide audible/visual alerts and can automatically capture a photo with temperature annotations for later analysis.

7.6. Image Analysis & Report Generation

Smartphone screen showing offline analysis capabilities and PDF report generation, including ambient temperature, measurement distance, emissivity, and measurement data.
Figure 9: Offline analysis and PDF report generation feature.

The app supports offline analysis of captured thermal images and videos. You can review measurement parameters, adjust emissivity, and analyze temperature data without an internet connection. The device also allows for the generation of professional PDF reports directly from your smartphone, which can include ambient temperature, measurement distance, emissivity, and detailed measurement data.

8. Maintenance

8.1. Cleaning

  • Non-optical surfaces: Use a clean and soft cloth to wipe the thermal imager.
  • Optical surfaces (lens): Avoid touching the lens with your hands. If the lens surface is contaminated, carefully wipe it with professional lens paper.

8.2. Storage

  • If the device is not used for a long time, store it in a cool and dry environment.
  • Charge the device regularly to maintain battery health and prevent power exhaustion.

9. Troubleshooting

  • Device not powering on: Ensure the device is charged. If stored for a long time, it might need regular charging to prevent battery exhaustion.
  • Smoke, sparks, or burnt odor: Immediately power off the device and discontinue use. Contact customer support.
  • Charging issues: Do not charge with wet hands. If the adapter or Type-C cable is damaged, replace them immediately to prevent overheating or short circuits.
  • Inaccurate temperature readings: Check the emissivity setting for the material being measured. Ensure the measurement distance is within the recommended range (0.3m to 3m).
  • App connectivity issues: Ensure your smartphone meets the minimum OS requirements (Android 10.0 / iOS 12.0 or above) and that Bluetooth/Wi-Fi is enabled for pairing.
  • Device damage: Do not attempt to disassemble the device. Contact customer support for professional maintenance.

10. User Tips

No specific user tips were available from provided reviews or Q&A content. However, based on product features, consider the following:

  • For best results, ensure the thermal imager's lens is clean before each use.
  • Experiment with different color palettes to find the one that best highlights the temperature differences for your specific application.
  • Utilize the "Picture-in-Picture" or "Fusion" image modes to combine thermal and visible light details, which can help in identifying the exact location of thermal anomalies.
  • Regularly generate and save PDF reports for critical inspections to maintain a record of your findings.
  • The compact size makes it ideal for inspecting hard-to-reach areas like behind appliances or inside wall cavities.

11. Warranty and Support

11.1. Warranty Period

This product comes with a 1-year warranty. The warranty period starts from the date of the first purchase, as indicated by the invoice date. If a valid invoice is not available, the warranty period will be calculated from the product's factory exit date. If the invoice date is later than the actual delivery date, the warranty period starts from the actual delivery date.

11.2. Non-Warranty Conditions

The warranty does not cover:

  • Damage due to exceeding the warranty period.
  • Inability to provide a valid warranty certificate or original purchase invoice, or if the product's serial number label has been altered, replaced, torn, or does not match the product model/number on the certificate.
  • Damage caused by misuse, accident, modification, inappropriate physical or operating environment, natural disaster, power surge, or improper maintenance/storage.
  • Damage caused by third-party software, services, or actions.
  • Normal discoloration, aging, bruising, and scratches on the surface shell from product use.
  • The product operating without interruption or error.
  • Consumable parts, except for failures caused by material or workmanship defects.
  • Failure to use the product according to the attached instructions, or for its intended function/environment, or any other circumstances where the company determines a violation of instructions.

The company is not responsible for any additional commitments made by the seller or any third party; claims for such commitments should be directed to them.

11.3. Contact Information

For technical support, warranty claims, or service inquiries, please contact:

  • Company: Shenzhen Yourulxing Technology Co., Ltd.
  • Tel: (+86) 400-863-6588
  • Website: www.yourealstar.com
  • Email: yrx@yourealstar.com
  • Address: Room F, 18F, Building 12, Lehui Science and Technology Innovation Center, No. 489 Jihua Road, Bantian Community, Longgang District, Shenzhen, China

A detailed user manual in PDF format is also available for download: User Manual (PDF)

12. Applications

The HoldPeak YXI256 Thermal Imaging Camera is a versatile tool suitable for a wide range of applications, including:

Various applications of the thermal imager: Security Monitoring, Home Repairs, Industrial Inspection, Vehicle Inspection, Electrical Inspection, Building Inspection.
Figure 10: Common applications for the YXI256 Thermal Imager.
  • Security Monitoring: Detecting heat signatures for surveillance.
  • Home Repairs: Identifying insulation gaps, drafts, and moisture issues.
  • Industrial Inspection: Checking machinery for overheating components.
  • Vehicle Inspection: Diagnosing engine or brake system heat issues.
  • Electrical Inspection: Locating hot spots in electrical panels and wiring.
  • Building Inspection: Assessing HVAC performance, detecting leaks, and evaluating energy efficiency.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.