1. Product Overview
This manual provides instructions for the installation, operation, and maintenance of your new LED Side Marker Lights, designed specifically for Dodge Charger models from 2015 to 2023. These lights serve as direct replacements for original equipment (OE) parts, enhancing visibility and the aesthetic appeal of your vehicle.
Figure 1: Product compatibility with 2015-2023 Dodge Charger and OE replacement numbers (68214404AA, 68214405AA, 68214126AA, 68214127AA).
2. Setup and Installation
The LED Side Marker Lights are designed for a plug-and-play installation, requiring no complex wiring modifications. Please follow these steps carefully:
- Identify Lights: Before installation, distinguish between the left/right and front/rear sidemarkers. The front lights are typically shorter than the rear lights. Refer to the markings (L/R) on the back of each light.
- Prepare Vehicle: Ensure your vehicle's ignition is off and the parking brake is engaged.
- Remove Old Light: Carefully take off the existing side marker light from its housing. This may involve gently prying it out with a non-marring tool.
- Disconnect Wiring: Disconnect the wiring harness from the old side marker light.
- Connect New Light: Connect the wiring harness to your new LED Side Marker Light. Ensure a secure connection.
- Insert New Light: Insert the new LED Side Marker Light into the vehicle's housing. Ensure it snaps securely into place.
- Test Functionality: Turn on your vehicle's lights (parking lights, turn signals) to confirm proper operation of the new LED side markers.
Figure 2: Visual guide for the easy installation process.
Figure 3: Product details highlighting left/right markings and the plug-and-play connector. Front lights are shorter than rear lights.
Installation Demonstration Video
Video 1: Demonstration of the LED Side Marker Lights installed on a Dodge Charger, showcasing the smoked lens, white Daytime Running Light (DRL) function, and overall brightness.
3. Operating Instructions
These LED Side Marker Lights operate automatically with your vehicle's lighting system. They provide enhanced visibility and a modern look.
- Front Lights: Emit an amber light, typically functioning as turn signals or parking lights.
- Rear Lights: Emit a red light, typically functioning as rear parking lights or brake lights.
- Brightness: Equipped with 130 high-brightness SMD LED chips, offering up to 500% more brightness than standard lights.
- Energy Efficiency: Designed for low power consumption, resulting in up to 70% energy savings compared to traditional bulbs.
Figure 4: Illustration of the amber light for the front markers and red light for the rear markers.
Figure 5: Details on the built-in 130PCS LED chip, highlighting +500% brightness, 30000 hours lifespan, and 70% energy saving.
4. Maintenance
Your LED Side Marker Lights are designed for durability and minimal maintenance.
- Weatherproof Design: Constructed with a sealed ABS+PC housing and an IP67 waterproof rating, these lights are resistant to dust and water ingress.
- Water Resistance: The lens surface features ultrasonic treatment to further improve water resistance, making them suitable for use in rainy or snowy conditions.
- Cleaning: Clean the lens with a soft cloth and mild soap and water as needed. Avoid abrasive cleaners that could scratch the surface.
- Lifespan: With an estimated lifespan of 30,000+ hours, these lights are built to last the lifetime of your vehicle under normal conditions.
Figure 6: Visual confirmation of the IP67 waterproof rating.
Figure 7: Water resistance is improved with ultrasonic treatment on the lens surface, suitable for rainy or snowy days.
5. Troubleshooting
These LED Side Marker Lights are designed to be error-free and flicker-free. If you encounter any issues, please consider the following:
- Light Not Working:
- Check the connection to the vehicle's wiring harness to ensure it is secure.
- Verify that the vehicle's corresponding fuse for the lighting circuit is intact.
- Ensure the light is correctly inserted into the housing and making proper contact.
- Flickering: While designed to be flicker-free, if flickering occurs, re-check the electrical connections for any looseness or corrosion.
- Defective Item: If you suspect a defective item, please contact customer support for assistance.
6. Specifications
| Feature | Specification |
|---|---|
| Product Type | LED Side Marker Light |
| Compatibility | Dodge Charger 2015-2023 |
| OE Part Numbers | 68214405AA, 68214404AA, 68214127AA, 68214126AA |
| Voltage | 12V |
| Wattage | 5W |
| Light Color | Front: Amber, Rear: Red |
| Lens Color | Smoke |
| Material | PC Lens + ABS Housing |
| LED Quantity | 130PCS SMD LED Chip per light |
| Lifespan | 30,000+ hours |
| Waterproof Rating | IP67 |
| Front Light Dimensions | 7.2" (L) x 1.2" (H) x 1.2" (D) |
| Rear Light Dimensions | 7.2" (L) x 1.0" (H) x 1.2" (D) |
| Item Weight | 0.25 kg (approximate, per set) |
7. User Tips
- Always double-check the compatibility of the lights with your specific Dodge Charger model year before purchasing and installing.
- When removing old lights, use plastic trim tools to avoid scratching your vehicle's paint.
- Ensure all connections are firm to prevent intermittent operation or moisture ingress.
8. Warranty and Support
For any product-related inquiries, technical support, or issues with defective items, please contact the seller directly. Customer service typically responds within 24 hours, excluding weekends and holidays.