1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Tuya WiFi Temperature and Humidity Smart Home Thermometer Hygrometer. This device is designed to monitor indoor environmental conditions with high precision and integrate seamlessly with your smart home ecosystem.
The sensor offers enhanced accuracy, faster data sampling, and extended battery life compared to previous models, ensuring reliable performance for your smart home needs.
2. Safety Information
- Keep the device away from water and high humidity environments.
- Do not expose the device to extreme temperatures or direct sunlight.
- Use only specified battery types (2*AAA) and ensure correct polarity during installation.
- Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
- Keep out of reach of children.
3. Product Overview
The Tuya WiFi Temperature and Humidity Sensor is a compact device designed for accurate environmental monitoring. It features high-precision probes for stable and reliable measurements. The device connects to your home WiFi network, allowing remote monitoring and control via the Smart Life or Tuya Smart app. It also supports integration with popular voice assistants like Amazon Alexa and Google Assistant.
Key Features:
- High Precision Sensors: Newly upgraded probes for precision measurement (Temperature ±0.3°C, Humidity ±3%) and long-term stability.
- Fast Sampling Time: Data refreshed as fast as possible, typically within 60 seconds, when temperature and humidity fluctuate.
- Low Power Consumption: Designed for long standby time, offering over 6 months of normal use with a low battery alert function.
- APP Remote Control: Monitor temperature and humidity remotely from anywhere at any time via the Smart Life or Tuya Smart app.
- Abnormal Alarm: Receive push notifications on your app if the current temperature/humidity exceeds your set thresholds.
- Data Storage & Records: Real-time monitoring and historical data logging for environmental analysis.
- Smart Scene Customization: Set up automated scenes and schedules within the app to control other smart devices based on temperature and humidity readings.
4. Setup
4.1. Package Contents
Please check the package for the following items:
- Tuya WiFi Temperature and Humidity Sensor
- Mounting bracket (if included)
- User Manual (this document, also available as PDF: View PDF)
- Note: 2*AAA batteries are NOT included and must be purchased separately.
4.2. Installation
- Push the mounting bracket upwards and remove it from the sensor body.
- Insert two AAA batteries (DC3V LR03*2) into the sensor, ensuring correct polarity. The indicator light on the sensor will turn on.
- Reattach the sensor to the mounting bracket. You can use 3M tape (not included) to install the sensor on a wall or other vertical surface.
4.3. App Installation and Device Connection
- Download the App: Scan the QR code provided in the manual or search for "Smart Life" or "Tuya Smart" in your smartphone's app store (Google Play Store for Android, App Store for iOS) to download and install the application.
- Register/Log In: Open the app and register for a new account or log in with your existing credentials.
- Enable Bluetooth: Ensure Bluetooth is enabled on your mobile phone.
- Add Device: In the Smart Life/Tuya Smart app, select the "+" icon to add a new device.
- Pairing Mode: Long press the sensor button for 5 seconds until the LED indicator light on the sensor flashes quickly. This indicates it's in pairing mode.
- Connect: The app should automatically detect the device and display "Devices to be added: 1". Press "Go Add" to proceed.
- Wi-Fi Configuration: Follow the on-screen prompts to connect the sensor to your 2.4GHz Wi-Fi network. (Note: 5GHz Wi-Fi networks are not supported).
- Rename Device: Once connected, you can rename the sensor for easier identification within the app.
5. Operating Instructions
5.1. Remote Monitoring
Once connected, open the Smart Life or Tuya Smart app to view real-time temperature and humidity readings from your sensor. The app provides a clear interface to see current conditions and historical data.
5.2. Setting Up Alarms
You can configure custom temperature and humidity thresholds within the app. If the readings go above or below these set limits, the app will send an abnormal alarm notification to your smartphone.
5.3. Smart Scene Customization
Utilize the app's smart scene feature to create automated actions. For example, you can set up a scene to turn on a humidifier when humidity drops below a certain level, or activate an air conditioner if the temperature rises too high.
5.4. Voice Assistant Integration
The sensor is compatible with Amazon Alexa and Google Assistant. Follow the instructions within your Smart Life/Tuya Smart app or your voice assistant app to link the device and control it using voice commands.
6. Maintenance
6.1. Battery Replacement
The sensor is designed for low power consumption, providing over 6 months of battery life. The app will notify you when the battery level is low. To replace the batteries:
- Remove the sensor from its mounting bracket.
- Open the battery compartment.
- Replace the two AAA batteries (DC3V LR03*2) with new ones, ensuring correct polarity.
- Close the battery compartment and reattach the sensor to its bracket.
6.2. Cleaning
Wipe the sensor's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the device.
7. Troubleshooting
- Device not connecting to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. Check if the sensor is in pairing mode (LED flashing quickly). Verify your Wi-Fi password. Move the sensor closer to the router.
- Inaccurate readings: Ensure the sensor is placed in a location with good air circulation, away from direct heat sources, vents, or direct sunlight. Allow some time for the sensor to stabilize after initial setup or relocation.
- No app notifications: Check your smartphone's notification settings for the Smart Life/Tuya Smart app to ensure notifications are enabled. Verify that alarm thresholds are correctly set in the app.
- Short battery life: Ensure you are using fresh, high-quality AAA batteries. Extreme temperatures can affect battery performance.
- Device unresponsive: Try removing and reinserting the batteries. If the issue persists, attempt to re-pair the device with the app.
For more detailed troubleshooting or specific issues, please refer to the official user manual PDF: View PDF.
8. Specifications
| Parameter | Value |
|---|---|
| Product Name | Temperature & Humidity Sensor |
| Product Size | 70*25*20mm |
| Input Voltage | DC3V LR03*2 (2x AAA batteries) |
| Quiescent Current | ≤30uA |
| Low Power Undervoltage | ≤2.7V |
| Control Mode | WiFi/ZigBee (WiFi version requires 2.4G WiFi) |
| Working Temperature | -10°C ~ +55°C |
| Working Humidity | 10% ~ 90% RH |
| Temperature Accuracy | ±0.3°C |
| Humidity Accuracy | ±3%RH |
| Sampling Time | 1 minute (60 seconds) |
| APP Support | Smart Life APP / Tuya APP |
| Smart Home Platform | Tuya, Amazon Alexa, Google Home |
9. User Tips
- For optimal performance, place the sensor in a central location within the room, away from direct drafts or heat sources.
- Regularly check the battery status in the app to ensure continuous monitoring.
- Experiment with different alarm thresholds to find the settings that best suit your needs for environmental alerts.
- Leverage the data storage feature to track long-term trends in your home's temperature and humidity.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions regarding the product, please contact the seller or manufacturer directly through the platform where you purchased the device. Please retain your proof of purchase for warranty purposes.