1. Introduction
The Erilles JH13 Hall Electromagnetic Joystick is a high-precision replacement analog stick sensor module designed to enhance your gaming experience by providing exceptional durability and accuracy. Utilizing Hall electromagnetic technology, this joystick offers a zero-contact design, eliminating wear and drift commonly found in traditional carbon film joysticks.
Key advantages of the JH13 Hall Electromagnetic Joystick include:
- Exceptionally long lifespan: Designed for extended use without degradation.
- Anti-Drift: Prevents unwanted stick movement, ensuring stable and precise control.
- Precision micro-control: Achieves unparalleled accuracy in game control.
2. Specifications
2.1 General Product Information
- Product Name: JH13 HALL Electromagnetic Joystick
- Brand Name: Erilles
- Model: TMR-JH13
- Type: Joysticks
- Interface Type: USB (for compatible controllers)
- Language: English Version
- Certification: NONE
- Origin: Mainland China
2.2 Compatibility
The JH13 Hall Electromagnetic Joystick is compatible with the following controllers:
- PS4 Gamepad
- PS5 Gamepad
- Switch Pro Controller
- Xbox One Controller
- Xbox Series S/X Controller
Note: Please match the applicable controllers based on the product name, color, and product image. Different colors of the JH13 HALL joystick correspond to different handles. If you are unsure about the product, please contact customer support for verification.
2.3 Hall Technology Overview
The JH13 joystick utilizes Hall electromagnetic technology, which operates on the principle of the Hall effect. It employs a linear Hall IC and a magnet structure. The rocker arm drives the magnet to move, and magnetic induction (non-contact) occurs between it and the Hall IC to simulate a linear voltage output. This non-contact design significantly reduces wear and tear compared to traditional carbon film joysticks.
2.4 Comparison with Carbon Film Joysticks
The JH13 (Hall joystick) offers significant improvements over traditional carbon film joysticks (like JP13) by providing a zero-contact design, leading to zero wear and zero drift. It replaces the failure-prone carbon film with a suspended magnet and Hall sensor system for permanent precision. The JH16 model further refines this with an all-new structural design for enhanced installation and disassembly.
3. Warnings & Safety Information
- ATTENTION: Do not disassemble or modify the product, as this may cause safety hazards.
- ATTENTION: Follow installation and operation guidelines to avoid injury.
- ATTENTION: Not for use with products other than the applicable Controllers.
- ATTENTION: To be used under the direct supervision of an adult.
- ATTENTION: The joystick must be kept out of the reach of children under a certain age.
4. Installation Instructions
This section provides step-by-step instructions for replacing your controller's joystick with the Erilles JH13 Hall Electromagnetic Joystick. This is a 1:1 replacement process.
- Open the packaging and carefully remove the new joystick.
- Disassemble your controller to access the internal components. Locate the original joystick module that needs to be replaced.
- Carefully remove the original joystick from the controller. This typically involves desoldering the existing module.
- Install the new JH13 joystick module into the controller. Secure it via soldering, ensuring all connections are firm and correct.
- Reassemble the controller, ensuring all parts are correctly seated and secured.
- After verifying normal controller functionality, calibrate the new joystick using a dedicated third-party calibration tool or the console's system settings (see Section 5 for details).
4.1 Visual Installation Guides
5. Operating Instructions: Calibration
After installing the new joystick, calibration is essential to ensure proper functionality and prevent issues like drifting or inaccurate center points. Follow the calibration steps specific to your controller:
5.1 For PS4/PS5 Controllers:
Open your preferred calibration tool website in a computer browser (e.g., dualshock-tools.github.io or nagashock.com/calibrate) and follow the on-screen instructions. If you require further assistance, please contact customer support for a step-by-step calibration video.
5.2 For Switch Pro Controllers:
After replacing the Switch Pro controller's joystick with the K-SILVER TMR model, calibration is required through the Nintendo Switch console's system settings.
5.3 For XBOX ONE/XBOX Series S/X Controllers:
Calibration can be performed on an Xbox console or a Windows PC with the official Xbox Accessories app installed.
6. Maintenance and Precautions
- Confirm compatibility with your controller model before installation to avoid damage.
- Avoid applying excessive pressure on the joystick during use to prevent damage.
- Do not immerse the joystick in water or expose it to prolonged direct sunlight.
- Store the joystick in a dry, cool place when not in use.
- Clean the joystick gently with a dry, soft cloth if necessary. Avoid using harsh chemicals.
7. Troubleshooting
7.1 Frequently Asked Questions (FAQs)
- Q: My controller does not recognize the joystick after installation.
- A: Verify correct installation, ensuring all solder points are secure. If the issue persists, try restarting your console.
- Q: The joystick operates abnormally after installation (e.g., drifting or inaccurate center point).
- A: After successful installation, calibration must be performed. Refer to Section 5 for detailed calibration instructions for your specific controller.
- Q: Are the Hall joysticks for Xbox compatible with the Xbox 360?
- A: No, this product does not apply to Xbox 360 controllers.
8. User Tips
- Ensure Proper Calibration: Always perform calibration after installation for optimal performance and to prevent any initial drift or inaccuracy.
- Handle with Care: While durable, avoid unnecessary force or impact to prolong the joystick's lifespan.
9. Warranty & Support
9.1 Manufacturer Information
- Company Name: Shenzhen Yinjie Technology Development Co., Ltd.
- Address: 309B, Building C, No. 17 Yongxiang East Road, Ma'antang Community, Bantian Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China
- Email: 380893941@qq.com
- Telephone: 86-15814653068
9.2 EU Authorized Representative
- Company Name: MJCM SARL
- Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR
9.3 After-Sales Service
If you have any questions or require assistance, please send an online message to the seller. For a digital copy of this user manual, you can refer to the PDF document available at this link.