1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new 3-piece Aluminum Alloy Plastic Air Conditioning Knob set, designed specifically for Geely Panda models manufactured between 2009 and 2017. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the parts out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Handle with care to avoid cuts or injuries.
3. Package Contents
Your package should contain the following items:
- 3 x Aluminum Alloy Plastic Air Conditioning Knobs (Black)
4. Technical Specifications
| Feature | Detail |
|---|---|
| Product Name | Aluminum Alloy Plastic Air Conditioning Knob Set |
| Compatibility | Geely Panda (2009-2017) |
| Material | High quality aluminum alloy + plastic (ABS) |
| Color | Black |
| Quantity | 3 pieces per set |
| Weight (per set) | 0.075 kg |
| Single Knob Dimensions | Height: 4 cm, Shaft Diameter: 0.8 cm |
| Batch/Serial Number | NT1025529HZ |
5. Installation Instructions
The AC knobs are designed for easy installation without drilling or damage. Follow these steps:
- Ensure the vehicle ignition is off.
- Carefully pry out the original AC knobs from the dashboard. You may use a plastic pry tool to avoid scratching the surrounding area.
- Align the new aluminum alloy knob with the shaft.
- Gently push the new knob onto the shaft until it is securely in place.
- Repeat for all three knobs.
Note: The color of the knob's light depends on your car's existing background light. Ensure your car's AC control style matches the product images for proper fitment.
6. Operating Instructions
These knobs function identically to your original manual AC control knobs. Ensure the vehicle ignition is on to operate the AC system.
- Power: Rotate the power knob to "ON/OFF" to start or shut down the AC system. If restarting, wait at least 3 minutes before turning it back on.
- Temperature: Rotate the "TEMP" knob clockwise to warm up or reduce cooling, and counterclockwise to cool down or reduce heating. The temperature range is typically 16°C-30°C, but this may vary by vehicle model.
- Mode (if applicable): Rotate the mode knob to select desired settings such as "COOL," "HEAT," "FAN," or "AUTO."
- Fan Speed (if applicable): Rotate the "FAN" knob clockwise for faster fan speed and counterclockwise for slower fan speed.
Notes:
- Do not force rotation of the knobs.
- Keep the knobs clean and dry.
- Stop use immediately if a knob becomes loose or stuck.
7. Maintenance & Storage
- Store any spare knobs or removed original knobs in a dry place.
- Keep them away from children.
- Clean the knobs periodically with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Knob won't rotate | Gear jam, foreign objects, or damage | Do not force. Remove any visible foreign objects. Contact maintenance if the issue persists. |
| No response when rotating | No power, loose knob, or faulty board | Check vehicle power. Ensure the knob is securely installed. Contact maintenance if the underlying board is suspected to be faulty. |
| Incorrect adjustment | Misaligned pointer, worn gears, or auto mode interference | Align the pointer correctly. If in auto mode, switch to manual control. Replace the knob if internal gears are worn. |
| Loose/falling knob | Loose installation or worn fasteners | Reinstall the knob, ensuring it snaps firmly into place. If it continues to loosen, contact maintenance for inspection of the shaft or internal components. |
9. User Tips
- Many users have reported that these knobs are of good quality and material, providing a durable upgrade.
- The installation is generally straightforward; simply remove the old knobs and insert the new ones.
- Confirm your Geely Panda model year (2009-2017) to ensure perfect fitment.
10. Disposal & Recycling
Please follow local environmental and waste disposal regulations when disposing of the product or its packaging materials.
11. Warranty & Support
For any issues or support inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt for warranty claims.
Manufacturer: Nantong Laitening Auto Parts Co., Ltd.
Address: NO134 Seyuan Road, Chongchuan District, Nantong City, China
Email: 525345970@qq.com
Phone: +8613291108720
EU Authorized Representative: MJCM SARL
Address: 78 avenue des Champs Elysees Bureau 326, Paris, France
Email: mjcm190928@gmail.com
Phone: +33-767213611
For a comprehensive user manual in PDF format, you may refer to the official document: User manual (PDF)