1. Product Overview
The handheld articulating endoscope is designed for inspecting narrow, curved, and hard-to-reach spaces. It is particularly useful for automotive repairs, such as inspecting car engines, combustion chambers, and exhaust manifolds. This device features temperature protection and a bidirectional 180-degree articulation mechanism for flexible inspection.
It provides real-time, high-definition video and images on its screen, which can also be transmitted to external devices via a data cable. The endoscope supports advanced expandable accessories and real-time temperature display to meet diverse inspection needs.
Warning:
Before using this product, please read this manual carefully and follow the instructions to avoid improper use, which may cause damage or injury.
2. Product Features and Components
The endoscope features a modular design with a detachable display and hot-swappable battery. Key components are illustrated below:
- HD Display (5-inch IPS screen)
- Back/Menu Button
- Scene Mode Button
- Up/Zoom In Button
- Down/Zoom Out Button
- OK/Toggle Button
- Power Button
- Directional Joystick
- Probe Cable
- Camera Probe (3.9mm ultra-slim lens)
- Card Slot
- Reset Button
- Type-C Charging Port
- Screen Detachment Button
- Capture Button
- Battery Compartment
- Release Button
- Speaker
The endoscope features a 3.9mm ultra-slim lens, redefining miniaturization and optical precision for detailed inspections.
The 5-inch hot-swappable full-color display provides clear visuals during operation.
The modular design allows for easy detachment of the battery pack and display module.
The 3.9mm HD probe is waterproof (IP67 rated for the probe) and oil-proof, ensuring uncompromised clarity in challenging environments.
3. Setup Instructions
3.1 Charging Guide
- Connect the device to a 5V DC adapter for charging.
- The red indicator light remains on during charging and turns off when fully charged.
- The device supports operation while charging.
- If storing the device unused for long periods, charge it at least once every 3 months to prevent battery damage from over-discharge.
3.2 Battery Disassembly and Assembly
The battery cover is located at the bottom of the handle. Press the button to remove the battery.
3.3 Screen Disassembly and Assembly
To disassemble the screen: Grasp the handle tightly, hold down the OPEN button on the back of the screen, and pull up the screen to separate it.
To assemble the screen: Simply align the screen with the card slot and press down firmly to install it.
4. Operating Instructions
4.1 Power On/Off
Press and hold the Power Button (
) to turn the device on or off. The monitor will light up with a green power indicator light when powered on.
4.2 LED Light Adjustment
The LED lights on the camera probe have three brightness levels. Short press the Power Button (
) to cycle through the brightness levels: bright, medium bright, and slightly bright. Press the button a fourth time to turn off the LED lights and restart the sequence.
4.3 Language Settings
The default language is English. The system supports the following languages:
- Simplified Chinese
- Traditional Chinese
- Japanese
- French
- German
- Czech
- Portuguese
- Polish
- Dutch
- Turkish
- Italian
- Spanish
- Russian
4.4 Switching Camera Views (Dual-Lens Models Only)
Long-press the Capture Button to toggle between front and side camera views.
4.5 Taking Photos and Videos
Press the Capture Button to take photos or record videos. Long press the "OK" button to enter the album. To view detailed images, long press the "Back/Menu" button. To delete an image, select "Delete Image" and press "OK" to confirm. Briefly press the "Back/Menu" button to exit the interface.
4.6 Data Transfer
Photos and videos can be transferred to a computer using either a card reader or a Type-C USB data cable.
If the device is not recognized by the computer during file transfer, restart the device or reconnect the Type-C cable. Do not disconnect the Type-C cable during data transfer, as this may cause data corruption or device failure.
4.7 Product Demonstration Video
Watch this video for a visual demonstration of the endoscope's features, including 360-degree rotation, screen switching, photo/video capture, battery removal, charging, lens types, and the waterproof probe.
5. Safety Precautions
- Do not use this device to observe the interior of human or animal bodies. Consequences are at your own risk.
- Do not use or store the device in explosive, strong electromagnetic, or flammable environments, as this may cause fire or explosion.
- Do not inspect live electrical components to avoid electric shock.
- Avoid direct contact with the lens tip, especially after use in high-temperature environments, as it may cause burns.
- Do not stare directly at the LED light source on the probe tip to prevent eye damage.
- Avoid excessive bending, stretching, twisting, or crushing the probe cable, as this may damage the device.
6. Maintenance
6.1 Cleaning the Lens and Probe
- Prolonged use may dirty the lens, blurring images. Clean the lens with alcohol or acetone before use.
- Keep the insertion tube away from liquids other than water, saline, engine oil, or light oil.
- After use, clean the insertion tube promptly to prevent corrosion.
6.2 Storage
- If storing the device unused for long periods, charge it at least once every 3 months to prevent battery damage from over-discharge.
7. Troubleshooting Guide
| Issue | Possible Cause | Solution |
|---|---|---|
| No power-on response | Dead or uninstalled battery | Charge or install the battery |
| Auto-shutdown | Low battery | Charge or replace the battery |
| Stuck on startup screen | System failure/low battery | Reinstall battery and restart |
| Failed image storage | Insufficient TF card space | Replace TF card or delete files |
8. Specifications
| Specifications | |
|---|---|
| Lens Diameter | 3.9mm (also available in 6mm, 8.5mm) |
| Probe Material | Flexible Stainless Steel |
| Megapixel | 1.0MP (for 3.9mm lens), 2.0MP (for 6mm/8.5mm lens) |
| Field of View | 70° |
| Focal Depth | 20-100mm |
| Sensor | 1/9CMOS (for 3.9mm lens), 1/6CMOS (for 6mm/8.5mm lens) |
| Rotation Angle | Up to 210° |
| Light Source | LED Light |
| Display Screen Size | 5-inch (also available in 4.3-inch, 7-inch) |
| LED Light Adjustment | Supported |
| Power Supply | 3000mAh Polymer Lithium Battery |
| Working Time | Approx. 4 hours |
| Language Support | 14 languages |
| Storage | Standard TF Card (Supports up to 64GB) |
| Operating Temperature (Probe) | -10°C to 70°C |
| Operating Temperature (Body) | -10°C to 45°C |
| Input Voltage | 5V DC |
| Humidity | 10% to 90% |
| Waterproof Rating (Body) | Not Waterproof |
| Waterproof Rating (Probe) | IP67 |
Note: To achieve maximum articulation angle, avoid coiling the cable into a tight circle.
9. User Tips
- The 5-inch screen provides good image quality for clear inspections.
- Utilize the zoom function to enlarge images for more detailed viewing.
- The thin lens wire is designed to maintain its horizontal position, typically without sagging for up to 40cm, which is beneficial for reaching into tight spaces.
- Be mindful of the memory switch location on the back of the device; avoid placing the device on surfaces that might accidentally press it.
- This endoscope is highly recommended for professional use, especially for car mechanics, due to its excellent visibility and image quality.
10. Warranty and Support
For detailed warranty information, technical support, and additional documentation, please refer to the official user manual PDF available at this link. You may also contact your retailer or the manufacturer's customer service for assistance.