1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya Smart Knob Lock. This smart lock offers multiple unlocking methods including fingerprint recognition, mobile app control via Bluetooth, and traditional mechanical keys, enhancing your residential security and smart home automation. Please read this manual carefully before installation and keep it in a safe place for future reference.
The Tuya Smart Knob Lock integrates with Tuya and Smart Life apps via Bluetooth for convenient control.
2. Packing List
Unpack the product package and check whether the following accessories are included:
- Front Lock Handle (x1)
- Rear Lock Handle (x1)
- Lock Body (x1)
- Strike Plate (x1)
- Gusset Box (x1)
- Keys (x2)
- Installation Key (x1)
- 45mm M4 Screw (x3)
- M4x21 Screw (x4)
All components of the Smart Knob Lock.
3. Installation Guide
3.1 Important Notes Before Installation
- Before installing the door lock, ensure that the built-in rechargeable battery is fully charged.
- The lock's rotating components must operate smoothly and flexibly.
- This lock requires a mechanical key for manual unlocking. Remove the mechanical key from the packaging and store it in a secure place for immediate use when needed.
3.2 Door Compatibility
Please measure your door thickness and ensure it is between 35mm and 55mm. Also, ensure the center-to-center distance conforms to the 60/70mm standard.
Door compatibility specifications.
3.3 Step-by-Step Installation
For a visual guide, please watch the installation video below:
Installation Guide for X09 Smart Knobs Lock.
- Count Parts: Verify all components are present as per the packing list.
- Pre-installation Steps: Use the installation key to align with the hole on the rear lock handle and press down the spring. Push up the rear lock handle, then remove it.
- Install Lock Cylinder: Insert the lock cylinder into the door edge and secure it with screws.
- Install Front Lock: Install the front lock and pass the tail ruler through the square rod hole in the lock body.
- Install Rear Lock: Install the rear lock and pass the tail ruler through the rear lock square bar hole.
- Tighten Screws: Tighten the pull screws to secure both lock handles.
- Align and Attach Handle: Align the gap in the rear lock handle with the gap in the lock body and attach the handle.
4. Operating Instructions
4.1 Mechanical Knob Operation
- Normal Open State: When the knob is rotated vertically, the door is in a normally open state. To lock, verify a fingerprint twice within 3 seconds. After the lock is closed, a single fingerprint verification will lock it.
- Anti-lock Mode: When the knob is rotated to the horizontal position, the lock is reversed and locked. In this mode, only the administrator's fingerprint can unlock it. The lock will automatically re-lock after 5 seconds of unlocking.
Two-mode settings for the Smart Knob Lock.
4.2 Unlocking Methods
- Fingerprint Unlock: Place your registered fingerprint on the sensor.
- App Unlock: Use the Tuya Smart App on your mobile phone (requires Bluetooth connection or a Bluetooth gateway for remote access).
- Mechanical Key Unlock: Use the provided physical keys for manual unlocking. This is useful in case of battery depletion or electronic malfunction.
Multiple unlocking options for convenience and security.
4.3 Remote Unlocking (via App)
To enable remote unlocking via your mobile phone, the lock must be linked to a Bluetooth gateway. This allows for remote switching and control of the lock.
Remote unlocking requires a Bluetooth gateway.
4.4 Definition of Lights and Buzzers
- Successful Identification: Green light turns on, one beep.
- Failed Identification: Red light flashes three times, two beeps.
- Charging: Red light is on.
- Fully Charged: Green light is on.
- Low Power Alarm: Red light flashes five times after opening the door.
4.5 Low Power Consumption State
- Not Bound to Bluetooth: If the system is not bound to a Bluetooth device, it enters a sleep state after 15 seconds of inactivity (no fingerprint touch or knob twist). To wake it up and search for a connected Bluetooth device, touch the fingerprint sensor or press a button.
- Bound to Bluetooth: If the system is bound to a Bluetooth device, it enters a sleep state after 4 seconds of inactivity. It does not need to be woken up manually; the mobile phone can directly initiate a Bluetooth connection through the Tuya Smart APP.
5. App Connection and Fingerprint Enrollment
5.1 Connect with Tuya App
Download the Tuya Smart App by scanning the QR code below or searching "TuyaSmart" in your mobile application market.
Scan to download Tuya Smart App.
- Open your phone's Bluetooth and Location services.
- Open the Tuya Smart App.
- Click "Add Device".
- Select the device manually to start connecting.
- Once connected, you can enter the homepage to add users, remove members, or change names.
- To remove the device, navigate to the device settings within the app and select "Remove Device". Confirm unbinding to clear all data.
5.2 Fingerprint Enrollment
To enroll fingerprints for unlocking:
- In the Tuya Smart App, navigate to the lock's settings and click the "Add" button under the Fingerprint section.
- Confirm the addition process in the app.
- Repeatedly capture five distinct fingerprints by placing your finger on the sensor. Ensure your finger is clean and dry for accurate recognition.
6. Maintenance
- Battery Charging: When you hear the low battery alert, charge the lock immediately using the Type-C port. Avoid leaving the device in a low-power state for extended periods to prevent damage to the battery.
- Fingerprint Sensor: Keep your fingers clean and dry when using the fingerprint sensor to ensure optimal recognition performance.
- Cleaning: Clean the lock's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- Mechanical Components: Ensure the lock's rotating components operate smoothly. If you notice any stiffness, consult the troubleshooting section or contact support.
The lock features a rechargeable battery and a Type-C charging port.
7. Troubleshooting
- Lock Not Responding: If the lock does not respond to fingerprint or app commands, check the battery level. If the battery is low, charge it immediately.
- Trial and Error Locking: The device will enter a 120-second lock state after 5 consecutive recognition errors. During this time, the fingerprint sensor will not respond, and an alarm will sound for 10 seconds. The lock can only be released by connecting via Bluetooth through the app or by waiting for the 120-second lockout period to expire.
- Fingerprint Recognition Issues: Ensure your finger is clean and dry. Try re-enrolling your fingerprint if issues persist.
- Unable to Connect via Bluetooth: Ensure your phone's Bluetooth and location services are enabled. If the lock is not bound to a Bluetooth device, touch the fingerprint sensor or press a button to wake it up before attempting to connect.
- Factory Reset: If you experience persistent issues, you may need to restore factory settings. This can be done via the Tuya app or locally: repeatedly rotate the knob 5 times within 5 seconds. The blue light of the fingerprint head will stay on. Touch any fingerprint within 10 seconds to clear data, and the buzzer will beep.
8. Specifications
| Feature | Specification |
|---|---|
| Admin ID Range | 3 |
| User ID Range | 17 |
| Fingerprint Capacity | Up to 20 sets |
| Power Supply | Built-in Rechargeable Battery |
| Type-C Power Supply | 5V 1A |
| Standby Power Consumption | ≤20 μA |
| Operating Power Consumption | <200 μA |
| Low Voltage Alert | 4.5V ± 0.2V (below 4.3V, indicator flashes three times) |
| Operating Temperature | -20°C to 70°C |
| Operating Humidity | 20% to 90% RH |
| Compatible Door Thickness | 35-55mm |
| Doorknob Function | Biometric, Key & Keypad |
| Connectivity | Bluetooth |
| Ways To Unlock | Mechanical Keys, FINGERPRINT, App |
| Smart Home Platform | Tuya |
| Certification | CE |
9. User Tips
- Regular Charging: To ensure uninterrupted operation, make it a habit to charge the lock proactively, especially if you notice the low battery alert.
- Clean Fingerprint Sensor: A clean sensor and dry finger are crucial for quick and accurate fingerprint recognition. Wipe the sensor regularly with a soft cloth.
- Keep Mechanical Keys Safe: Always keep your mechanical keys in a secure, accessible location outside the property for emergency access.
- Explore App Features: The Tuya Smart App offers various features beyond basic unlocking, such as adding multiple users, setting temporary codes, and monitoring lock activity. Explore these features to maximize your lock's potential.
10. Warranty and Support
For detailed warranty information and further support, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is available for download: