GGbingo MZ-L2201

Contents

GGbingo Motion Sensor Night Light

Model: MZ-L2201

Brand: GGbingo

1. Introduction

The GGbingo Motion Sensor Night Light (Model MZ-L2201) is a versatile, Type-C rechargeable wireless LED lamp designed for automatic illumination in various indoor spaces. It features human body induction for convenience and soft light for eye protection, making it ideal for kitchens, cabinets, wardrobes, staircases, and more.

GGbingo Motion Sensor Night Light, showing warm and white light versions, USB-C charging, and key features like magnetic adsorption, long battery life, human body induction, USB rechargeable, and soft light eye protection.
GGbingo Motion Sensor Night Light with key features highlighted.

2. Safety Warnings

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • WARNING: Swallowing can lead to chemical burns, perforation of soft tissue and death. Severe burns can occur within 2 hours of ingestion.

3. Package Contents

Ensure all items are present upon unpacking:

  • GGbingo Motion Sensor Night Light unit
  • Type-C USB Charging Cable
  • Magnetic Adsorption Base

4. Setup and Installation

4.1 Charging the Device

Before first use, fully charge the night light using the provided Type-C USB cable. The charging port is located on the side of the unit.

Night light in use in a bedroom, highlighting USB rechargeable feature and suitable locations like kitchen, bedroom, wardrobe, and WC. Also shows the switch with 'Always ON', 'Induction (AUTO)', and 'OFF' settings.
USB Rechargeable feature and suggested installation locations.

4.2 Installation

The night light features a self-contained installation method with strong magnetic adsorption.

  1. Choose a clean, dry, and smooth surface for installation (e.g., wall, cabinet interior).
  2. Attach the magnetic adsorption base to the desired surface. Ensure it is firmly secured.
  3. Place the GGbingo Motion Sensor Night Light onto the magnetic base. The light can be easily removed for charging or repositioning.

5. Operating Instructions

The night light has a three-position switch for different operating modes:

Diagram showing the night light's dimensions (8.5cm/3.3inch diameter, 2.3cm/0.9inch height) and the three-position switch (OFF, AUTO, ON). Includes usage examples.
Night light dimensions and switch positions.
  • OFF Mode: Slide the switch to the 'OFF' position. The light will remain off, conserving battery.
  • AUTO (Sensing) Mode: Slide the switch to the 'AUTO' position. The light will operate based on motion detection and ambient light:
    • In low light environments (Night Sensing Mode), the light will only turn on when human motion is detected.
    • In brighter conditions (All Day Sensing Mode), the light will turn on when human motion is detected, regardless of ambient light levels.
    • The light has a 120° sensing angle and a 3-5 meter sensing distance.
    • The light will automatically turn off approximately 25 seconds after human motion leaves the sensing range.
    • The light will stay on continuously if human motion remains within the sensing range.
    Diagram illustrating the 120° sensing angle and 3-5 meter sensing distance of the motion sensor.
    Motion sensing angle and distance.
  • ON Mode: Slide the switch to the 'ON' position. The light will remain continuously on, regardless of motion or ambient light.
Comparison of warm light and white light options, with examples of the light in a bedroom and on a desk.
Available light color options: Warm and White.

6. Maintenance

6.1 Cleaning

Wipe the night light with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components.

6.2 Battery Care

  • Recharge the device when the light dims or stops responding to motion.
  • Avoid completely draining the battery frequently to prolong its lifespan.
  • Do not leave the device charging for excessively long periods after it is fully charged.

7. Troubleshooting

Problem Possible Cause Solution
Light does not turn on. Battery is low or depleted.
Switch is in 'OFF' position.
Insufficient motion detected.
Charge the device fully.
Slide the switch to 'AUTO' or 'ON'.
Ensure motion is within sensing range (3-5m, 120°).
Light does not turn on automatically in the dark. Switch is not in 'AUTO' mode.
Ambient light is too bright for 'Night Sensing Mode'.
Ensure the switch is set to 'AUTO'.
Test in a darker environment or ensure motion is detected.
Light stays on too long or doesn't turn off. Continuous motion in sensing range.
Switch is in 'ON' position.
Ensure no continuous motion is present. The light turns off after 25 seconds of no motion.
Slide the switch to 'AUTO' or 'OFF'.
Light is dim. Low battery. Recharge the device.

8. Specifications

Feature Detail
Model Number MZ-L2201 (Internal: 001)
Material ABS
Installation Method Self-contained (Magnetic Adsorption)
Power Source Rechargeable Battery (Type-C USB)
Voltage 6 V
Luminous Flux 249-2000 (Units not specified, typically Lumens)
Is Bulbs Included No (Integrated LED)
Is Dimmable Yes
Is Smart Device Yes (Motion Sensing)
Power Generation SWIVEL
Sensing Angle 120°
Sensing Distance 3-5 meters
Dimensions (Diameter x Height) 85mm x 20mm (approx. 3.3in x 0.8in)
Origin Mainland China
Certification RoHS, EMC, CE, CCC
Diagram showing the night light's dimensions (85mm diameter, 20mm height) for the warm light version.
Detailed dimensions of the night light.

9. User Tips

  • For optimal performance and long battery life, ensure the night light is fully charged before its first use and recharge it promptly when the light dims.
  • If the automatic motion sensing isn't working as expected, double-check that the switch is firmly set to the 'AUTO' position.
  • When installing multiple units, test each one individually to ensure proper function and charging.

10. Frequently Asked Questions (FAQ)

Q: How do I charge the night light?
A: Use the provided Type-C USB cable to connect the light to a suitable USB power source.
Q: Does it have different light colors?
A: Yes, the GGbingo Motion Sensor Night Light is available in both warm light and white light options.
Q: What is the sensing range of the motion sensor?
A: The motion sensor has a 120° sensing angle and can detect motion from a distance of 3 to 5 meters.

11. Warranty and Support

For warranty claims, technical support, or further inquiries, please contact the seller or manufacturer directly. Refer to the full multi-language user manual for additional details: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.