HOMEFISH Square LED Digital Voltmeter Ammeter Hertz Meter

Contents

HOMEFISH Square LED Digital Voltmeter Ammeter Hertz Meter User Manual

Model: Square LED Digital Voltmeter Ammeter Hertz Meter

1. Product Overview

The HOMEFISH Square LED Digital Voltmeter Ammeter Hertz Meter is a compact, multi-functional device designed to simultaneously display AC voltage (V), current (A), and frequency (Hz). It serves as an indicator for various electrical circuits and equipment.

Product Name: Mini Three-Display AC Digital Display Meter

Purpose & Usage Restrictions: This device is applicable to circuits in power systems, telecommunications, machine tools, marine vessels, textile machinery, printing equipment, mining machinery, and other industrial or commercial settings. It is primarily used for signal voltage indication, pre-alarm signals, fault signals, and general status indication.

HOMEFISH Square LED Digital Voltmeter Ammeter Hertz Meter in various colors

Figure 1: HOMEFISH Digital Meter in various display colors (White, Red, Blue, Green, Yellow).

2. Safety Information

WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.

  • Electrical Safety: Always disconnect power to the circuit before installation or maintenance to avoid electric shock. Do not modify the power adapter or core circuits of the device.
  • Environmental Conditions: Do not use the device in damp, high-temperature, or fire-prone areas. Keep away from water, open flames, high-temperature equipment, and strong magnetic fields (e.g., microwaves, routers).
  • Installation Safety: Minors are prohibited from installing this device. If performing high-altitude work (over 1.5m), use appropriate fall protection and anti-slip measures (e.g., secure ladders).
  • Handling: Keep all tools and accessories out of reach of children.
  • Product Integrity: Do not disassemble or modify core components without authorization. The manufacturer is not liable for malfunctions, personal injuries, or property losses caused by improper operations or unauthorized modifications.

3. Setup and Installation

3.1 Package Contents

Before installation, please check the package for the following items:

  • 1x Square LED Digital Voltmeter Ammeter Hertz Meter
  • 1x Current Transformer (CT)
  • Essential installation accessories (e.g., mounting nuts, connectors)
Digital meter with current transformer and wiring

Figure 2: Main components: Digital Meter and Current Transformer (CT).

3.2 Environmental Requirements

  • Install near a power outlet with sufficient cable length.
  • Ensure adequate ventilation and no obstructions to the device's function.
  • If wall-mounting, choose solid walls (concrete/brick recommended) to prevent the product from falling. Avoid hollow or gypsum board walls.

3.3 Installation Steps

This device can be panel-mounted or used on a desktop (desktop stand sold separately).

  1. Preparation:
    • Ensure the product model matches local voltage and interface specifications.
    • Disconnect power to the circuit where the meter will be installed.
  2. Mounting (Panel/Wall):
    • For panel mounting, create a square cutout of appropriate dimensions for the meter.
    • For wall mounting, attach an installation template to the wall, level it, and mark screw holes. Drill holes (4-6cm deep, matching expansion tube length), then insert expansion tubes and secure the mounting base with self-tapping screws.
    • The meter typically secures into the panel/base using a threaded body and a locking nut from the rear.
  3. Wiring Connections:

    Refer to the diagram below for typical wiring. Always ensure power is off before making connections.

    Rear view of multiple digital meters showing wiring terminals

    Figure 3: Rear view of the meter, showing power input terminals and CT connector.

    1. Power Supply to Meter: Connect the two thin wires (typically red and black) from the meter to the AC power source (within the AC20-500V range) that you wish to monitor voltage from. These wires also power the meter itself.
    2. Current Transformer (CT) Connection:
      • Connect the CT's small plug to the corresponding socket on the back of the meter.
      • For current measurement, pass the live wire of the circuit you want to measure current through the hole of the current transformer. Ensure the wire passes completely through the CT.
  4. Final Check:
    • Ensure all connections are secure and correct.
    • Re-level the unit if necessary.

Voltage and Interface Adaptation: The device supports a wide AC voltage range (AC20-500V). No external transformer is typically needed within this range. Ensure your local power outlet and plug types are compatible, using an appropriate adapter if required.

4. Operating Instructions

Once properly installed and powered on, the HOMEFISH Digital Meter will automatically display the measured values:

  • Voltage (V): The top line displays the AC voltage.
  • Current (A): The middle line displays the AC current.
  • Frequency (Hz): The bottom line displays the AC frequency.

The meter operates continuously as long as it receives power. There are no user-adjustable settings or buttons on the device itself.

Digital meter displaying 206V, 0.6A, 50Hz

Figure 4: Example display showing Voltage, Current, and Frequency readings.

5. Maintenance

  • Cleaning: Keep the device clean and free from dust. Use a soft, dry cloth to wipe the display and casing. Do not use abrasive cleaners or solvents.
  • Environment: Ensure the operating environment remains within the recommended conditions (avoid damp, high-temperature, or fire-prone areas).
  • No User-Serviceable Parts: This device contains no user-serviceable parts. Do not attempt to open or repair the unit yourself, as this will void any warranty and may pose a safety risk.

6. Troubleshooting

ProblemPossible CauseSolution
No display / Device not turning onNo power supply; loose connection; incorrect voltage.Check power connections to the meter. Ensure the power source is active and within the AC20-500V range. Verify all wiring is secure.
Voltage/Frequency displayed, but Current (A) shows 0.00 or incorrect valueCurrent Transformer (CT) not connected; wire not passing through CT; CT connected incorrectly.Ensure the CT is securely plugged into the meter. Verify that the live wire of the circuit you want to measure current from passes completely through the CT's hole.
Inaccurate readingsIncorrect wiring; electrical interference; device malfunction.Double-check all wiring according to the installation instructions. Ensure the device is not near strong sources of electromagnetic interference. If the problem persists, contact customer support.
Display flickering or unstableUnstable power supply; loose connection.Ensure the power supply to the meter is stable. Check for any loose connections.

7. Specifications

FeatureSpecification
ModelSquare LED Digital Voltmeter Ammeter Hertz Meter
Voltage Measurement RangeAC 20-500V
Current Measurement Range0-100A (via Current Transformer)
Frequency Measurement Range20-75Hz (typical)
Display TypeLED Digital, Three-Display (V, A, Hz)
DIY Supplies CategoryElectrical
Battery IncludedNo
High-Concerned ChemicalsNone
OriginMainland China
Package Dimensions (L x W x H)Approx. 6 cm x 6 cm x 3 cm
Package WeightApprox. 0.042 kg
Available Display ColorsWhite, Red, Blue, Green, Yellow

8. User Tips

Based on user feedback, here are some practical tips for using your HOMEFISH Digital Meter:

  • Generator Monitoring: This meter is highly effective for monitoring the output of both gasoline and diesel generators, providing essential voltage, current, and frequency data.
  • Bright Display: The LED display is bright and clear, making readings easy to see even in various lighting conditions.
  • Versatile Mounting: The design allows for secure mounting in a round hole (with appropriate adapter/bezel) or a square panel cutout, offering flexibility for integration into control panels or enclosures.
  • Budget-Friendly: It's considered a good, cost-effective option for basic AC electrical parameter monitoring.
Digital meter installed in an electrical box

Figure 5: Example of the meter integrated into an electrical enclosure.

9. Warranty and Support

9.1 Disclaimer

Please note the following:

  • The manufacturer is not liable for malfunctions caused by force majeure (e.g., earthquakes, fires), improper use, third-party damage, or issues arising from cross-border transportation accidents.
  • The warranty (if any) is void if core components are disassembled, modified, or if non-original accessories are used with this product.
  • This manual is for guidance only. Product parameters and functions are subject to change without prior notice. The actual product specifications and features shall prevail. The manufacturer reserves the right of final interpretation.
  • This product is designed to comply with destination regulations and platform rules. Consumers bear full responsibility for improper use.

9.2 Further Documentation

A PDF version of the user manual may be available for download. Please refer to the seller's product page or contact them for the latest version: User Manual (PDF)

9.3 Customer Support

For any questions, technical assistance, or warranty claims, please contact the seller directly through your purchase platform. Provide your order number and a detailed description of the issue for prompt support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.