1. Important Safety Information
Please read all safety warnings and instructions carefully before using this appliance.
- This product is not suitable for children under 14 years old.
- Do not touch the heating surface with your hands to prevent burns.
- Keep away from water: Never use near a bathtub, shower, or sink to prevent electric shock.
- Avoid hot surfaces: During use and within 10 minutes after turning off, the outer side of the hair curler remains hot. Do not touch the metal plates or place it on flammable materials.
- Do not wrap the power cord around a hot device.
- Do not disassemble or modify the appliance yourself.
2. Product Overview
The TINSOL 40mm Professional Curling Iron is designed to create large, wavy curls with ease. It features a ceramic glaze coating for hair care and quick heating capabilities.

Image: TINSOL 40mm Professional Curling Iron highlighting Ceramic Glaze Coating, Hair Care, No Damage, and 10-Second Heating.

Image: Diagram showing the layers of the heat pipe: Ceramic Glaze Coating, Anti-Rust Layer, and Thermal Layer for enhanced hair care.
3. Setup
- Unpack: Carefully remove the curling iron and all accessories from the packaging.
- Inspect: Check the appliance for any visible damage. Do not use if damaged.
- Power Connection: Ensure your power outlet matches the appliance's voltage (210-240V). The curling iron is available with EU or Korean plug types. Use an appropriate adapter if necessary.
- Placement: Place the curling iron on a heat-resistant, flat surface away from water and flammable materials.

Image: TINSOL Curling Iron packaged with an EU plug type.
4. Operating Instructions
4.1 Getting Started
- Plug the curling iron into a suitable power outlet.
- Turn on the appliance using the power button.
- Select your desired temperature setting. The curling iron offers 5 temperature speeds: 120℃, 140℃, 160℃, 180℃, and 210℃. Choose the appropriate temperature according to your hair type.
- Allow the curling iron to heat up. It features 10-second quick heating for high modeling efficiency.
4.2 Curling Your Hair
This appliance is suitable for both dry and wet hair.
- Ensure your hair is clean and detangled.
- Divide your hair into several small sections.
- Open the clamp of the curling iron and place a section of hair between the barrel and the clamp, starting approximately 2-3 cm away from the roots.
- Slowly and evenly pull the curling iron down towards the ends of the hair, rotating it as you go to create the curl.
- Hold for a few seconds (optimal styling time is 1-2 minutes per section, depending on hair type and desired curl intensity).
- Release the clamp and gently slide the curling iron out of the hair.
- Do not clamp the same spot repeatedly to avoid heat damage.
- Repeat for all sections of hair.

Image: A woman demonstrating the use of the 40mm curling iron to create large, wavy curls.
Video: A demonstration of how to use the TINSOL 40mm Professional Curling Iron to achieve wavy hair.
4.3 After Use
- Turn off the curling iron using the power button.
- Unplug the appliance from the power outlet.
- Allow the curling iron to cool down completely before storing.
5. Maintenance
- Cleaning: Ensure the appliance is unplugged and completely cool before cleaning. Wipe the barrel and handle with a soft, damp cloth. Do not use abrasive cleaners or immerse the appliance in water.
- Storage: Store the curling iron in a cool, dry place. Do not wrap the power cord tightly around the appliance, as this can damage the cord.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Curling iron does not heat up, but indicator light is on. | Internal fault or insufficient power. | Ensure the appliance is fully plugged into a working outlet. Try a different outlet. If the issue persists, contact customer support. |
| Temperature settings change accidentally during use. | Hand placement may be pressing the temperature control buttons. | Adjust your grip to avoid accidental button presses. |
| Hair ends do not curl tightly. | Clamp not holding hair tightly enough, or hair section is too large. | Ensure hair is properly secured under the clamp. Use smaller sections of hair. |
| Appliance does not turn on. | No power supply. | Check if the appliance is properly plugged in and the power outlet is functional. |
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Hair Curler |
| Brand | TINSOL |
| Model | YX-888 |
| Power | 55W |
| Voltage | 210-240V (220V) |
| Barrel Diameter | 40mm |
| Thermal Conductive Material | Tourmaline Ceramic |
| Optimal Styling Time | 1-2 minutes |
| Applicable Hair Type | Dry and Wet |
| Temperature Control | 5 speeds (120℃, 140℃, 160℃, 180℃, 210℃) |
| Heating Time | 10 seconds (quick heating) |
| Power Cord Tail Assembly Mode | 360° Rotatable |
| Material | Plastic |
| Certification | CE |
| Dimensions (Approx.) | Total Length: 350mm, Barrel Length: 160mm, Width: 35mm |
| Weight (Approx.) | 0.484 kg |

Image: Diagram showing the dimensions of the TINSOL 40mm curling iron.
8. User Tips
- This 40mm curling iron is ideal for creating large, bouncy waves.
- Always check your plug type upon arrival and have an appropriate adapter ready if needed.
- Be mindful of your hand placement during use to avoid accidentally changing the temperature settings.
- If you are new to using hair curlers, practice on a lower heat setting until you get comfortable with the technique.
9. Warranty and Support
This product comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly.