1. Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your MT7902 WiFi 6E Card, model AW-XB552NF. This highly integrated single-chip solution offers low-power WiFi and Bluetooth connectivity, supporting 2.4G, 5G, and 6G bands for high-speed wireless communication and Bluetooth 5.2 for device pairing.
The MT7902 is specifically designed for NGFF CNVi slots. Please ensure your system has a compatible slot before installation.
2. Safety Information
- Avoid Water: Do not expose the device to water or moisture.
- Professional Installation: Do not disassemble the card by non-professionals. Improper handling can damage the device and void any warranties.
- Static Electricity: Handle the card with care, preferably in a static-free environment, to prevent damage from electrostatic discharge.
3. Package Contents
The package should contain the following item:
- 1 x MT7902 WiFi Card (AW-XB552NF)
4. Specifications
| Feature | Detail |
|---|---|
| Product Name | MT7902 card |
| Model Number | L1EC13AC1303896 (AW-XB552NF) |
| Chipset | MediaTek MT7902 |
| Application | Desktop |
| Interface Type | PCI Express (NGFF CNVi) |
| Adapter Socket | PCI-E |
| Type | Wireless (Internal) |
| Frequency Bands | 2.4 GHz, 5 GHz, 6 GHz (Tri-Band) |
| Wireless Transmission Rate | Up to 2400Mbps (2.4G-300Mbps, 5G-1200Mbps, 6G-2400Mbps) |
| Wireless Communication Standard | IEEE 802.15.4, WiFi 6E |
| Bluetooth Protocol | BT5.2 |
| Wireless Socket | USB 2.0 (for Bluetooth functionality) |
| Heat Dissipation | Support |
| Dimensions | Approx. 22mm x 30mm (0.87in x 1.18in) |
| Origin | Mainland China |
| Certification | NONE (as per provided data) |
Note: Specifications are subject to change without prior notice.
5. Setup Instructions
- Prepare your System: Power off your desktop computer and disconnect it from the power source. Open the computer case to access the motherboard.
- Identify Compatible Slot: Locate an available NGFF CNVi slot on your motherboard. The MT7902 card is specifically designed for this type of slot and does not support common NGFF slots. Please verify compatibility before proceeding.
- Install the WiFi Card: Carefully align the MT7902 WiFi card with the NGFF CNVi slot. Gently push the card into the slot until it is fully seated. Secure the card with any retaining clips or screws provided by your motherboard or case.
Figure 1: Angled view of the MT7902 WiFi card, showing its compact size and connectors.
Figure 2: The MT7902 WiFi card in front of a desktop computer case, illustrating its installation environment. - Connect Antennas (if applicable): If your system requires external antennas, connect them to the "Main" and "Aux" connectors on the WiFi card.
- Close the Case: Once the card is securely installed, close your computer case and reconnect the power source.
- Power On and Install Drivers: Power on your computer. The operating system may automatically detect and install basic drivers. For full functionality, including WiFi 6E and Bluetooth 5.2, it is recommended to download and install the latest drivers from the manufacturer's website or the provided PDF manual.
For detailed visual guidance, please refer to the official user manual PDF: MT7902 WiFi Card User Manual (PDF).
6. Operating Instructions
6.1. Connecting to a WiFi Network
- Ensure the necessary drivers are installed.
- Access your operating system's network settings (e.g., Windows: Settings > Network & Internet > Wi-Fi).
- Turn on Wi-Fi and select your desired network from the list of available networks.
- Enter the network password if prompted and click "Connect".
- The card supports 2.4GHz, 5GHz, and 6GHz bands. Your system will automatically connect to the best available band supported by your router.
6.2. Using Bluetooth 5.2
- Ensure the Bluetooth drivers are installed.
- Access your operating system's Bluetooth settings (e.g., Windows: Settings > Devices > Bluetooth & other devices).
- Turn on Bluetooth.
- Put your Bluetooth device (e.g., headphones, mouse) into pairing mode.
- Select "Add Bluetooth or other device" on your computer and choose your device from the list to pair.
7. Maintenance
- Keep Clean: Periodically clean the interior of your computer case to prevent dust buildup on the WiFi card, which can affect performance and heat dissipation. Use compressed air for cleaning.
- Avoid Physical Damage: Ensure the card is securely fastened and not subjected to physical stress or impact.
- Driver Updates: Regularly check for updated drivers from the manufacturer to ensure optimal performance and security.
8. Troubleshooting
8.1. WiFi Card Not Detected / Not Functioning
- Check Slot Compatibility: Verify that your motherboard has an NGFF CNVi slot. This card is not compatible with standard NGFF slots.
- Reseat the Card: Power off your computer, open the case, and carefully remove and reinsert the WiFi card to ensure it is properly seated in the slot.
- Driver Installation: Ensure the correct drivers are installed. If not, download and install them from the manufacturer's website.
- BIOS/UEFI Settings: Check your system's BIOS/UEFI settings to ensure the PCI Express slot or integrated wireless functionality is enabled.
8.2. Poor WiFi Signal or Slow Speeds
- Antenna Connection: Ensure any external antennas are securely connected to the "Main" and "Aux" ports on the card.
- Router Proximity: Move your computer closer to the wireless router or access point.
- Interference: Avoid placing the computer near devices that can cause wireless interference (e.g., microwaves, cordless phones, other wireless devices).
- Router Settings: Ensure your router supports WiFi 6E and the desired frequency bands (2.4GHz, 5GHz, 6GHz) and is configured for optimal performance.
8.3. Bluetooth Issues
- Driver Installation: Verify that Bluetooth drivers are correctly installed.
- Enable Bluetooth: Ensure Bluetooth is enabled in your operating system settings.
- Device Pairing: Make sure the device you are trying to connect is in pairing mode and within range.
8.4. Visual and Measurement Discrepancies
- Color Variation: Due to differences in lighting and screen settings, the actual color of the item may vary slightly from images. This is normal and does not indicate a defect.
- Size Variation: Minor differences (0.5-2cm) in measurements may occur due to manual measurement. This is within expected manufacturing tolerances.
9. User Tips
- Always ensure your operating system is up-to-date, as this can often resolve compatibility issues with new hardware.
- For optimal WiFi 6E performance, pair this card with a WiFi 6E compatible router.
- If experiencing intermittent connectivity, try updating your motherboard's BIOS/UEFI firmware.
10. Warranty and Support
For technical support, warranty information, or further inquiries, please contact the manufacturer:
- Manufacturer: Shenzhen Fuxi Electronics Co., Ltd
- Email: smtfxdz@163.com
- Telephone: 13424225184
Please retain your proof of purchase for warranty claims.