vilnason BP-4

Contents

VILNASON BP-4 Skin Tightening Face Machine

User Instruction Manual

1. Introduction

Thank you for choosing the VILNASON BP-4 Skin Tightening Face Machine. This advanced beauty instrument utilizes LED light therapy, Radio Frequency (RF), and Electrical Muscle Stimulation (EMS) to help improve skin elasticity, reduce wrinkles, and promote overall skin rejuvenation. Please read this manual carefully before use to ensure safe and effective operation.

2. Product Components and Function Buttons

Familiarize yourself with the device's parts and controls:

VILNASON BP-4 Beauty Instrument with labeled buttons

Figure 1: Device Overview with Function Buttons

  • Conductive Plate: The surface that makes contact with your skin, delivering treatments.
  • Color Light: Emits LED light for therapy (e.g., red, blue).
  • Long Press to Switch Vibration Mode / Gear Switch Button: Press and hold to toggle vibration mode. Short press to cycle through intensity gears (1st, 2nd, 3rd).
  • Power On/Off Button / Mode Switch Button: Press and hold to turn the device on or off. Short press to switch between Mode 1 and Mode 2.
  • Gear Indicator Light: Displays the current intensity gear (1st, 2nd, or 3rd gear).
  • Type-C Charging Port: For connecting the charging cable.

3. Setup

3.1 Charging the Device

Before first use, fully charge the device. Connect the provided Type-C USB cable to the charging port on the device and plug the other end into a suitable USB power adapter (not included). The indicator lights may show charging status.

3.2 Skin Preparation

Ensure your face is thoroughly cleansed and dry before each treatment. Remove all makeup, oils, and impurities. For optimal results and to ensure proper conductivity, apply a thin layer of conductive gel or your preferred skincare serum to the treatment area.

4. Operating Instructions

Follow these steps for effective use of your VILNASON BP-4 device:

  1. Power On: Press and hold the Power On/Off Button for approximately 1.5 seconds. The device will turn on, the color lights will illuminate, and the gear indicator light will show the first gear (white light).
  2. Select Mode: The device defaults to Mode 1 after powering on. Short press the Mode Switch Button to switch to Mode 2.
  3. Adjust Gear (Intensity): Short press the Gear Switch Button to select your desired working gear. There are 3 gears (intensity levels). Pressing the button will cycle through gears: 1-2-3-1-2-3.
  4. Activate Vibration (Optional): Press and hold the Gear Switch Button to toggle the vibration mode on or off.
  5. Apply to Skin: Gently place the conductive plate onto your skin, ensuring full contact. Move the device slowly in upward and outward motions across your face and neck. Avoid the thyroid area.
  6. Treatment Duration: Use for 5-10 minutes per session, 3-5 times a week, or as recommended by your skincare professional.
  7. Power Off: After your session, press and hold the Power On/Off Button for approximately 1.5 seconds to turn off the device.

4.1 Visual Demonstration

Video 1: Product demonstration showing application and usage techniques.

4.2 Skincare Energy and Penetration

Diagram showing skincare energy penetration

Figure 2: Diagram illustrating how the device upgrades skincare energy for deeper penetration and focused effects.

4.3 Multi-Energy Skincare

Diagram of red light, blue light, pulse, and electric current penetrating skin

Figure 3: Illustration of the device's combined use of color light (red, blue), electric energy (EMS), and pulse for deep skin penetration.

4.4 Targeted Facial Areas

Image showing targeted facial areas and potential improvements

Figure 4: Visual guide for smoothing the four major areas of the face: forehead, eye area, cheeks, and bottom line.

5. Maintenance

  • Cleaning: After each use, wipe the conductive plate with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
  • Storage: Store the device in a cool, dry place, away from direct sunlight and moisture. Keep it out of reach of children.
  • Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it when the battery is low.

6. Troubleshooting

  • Device not turning on: Ensure the device is fully charged. Press and hold the power button for 1.5 seconds.
  • No sensation or weak sensation: Ensure the conductive plate is in full contact with your skin. Apply a sufficient amount of conductive gel or serum. Increase the gear (intensity level).
  • Lights not working: If the device powers on but lights do not illuminate, contact customer support.

7. Specifications

Brand Namevilnason
Model NumberBP-4
Working PrincipleLED, RF, EMS
Power SourceRechargeable battery
VoltageBelow-50V AC (Safety Extra-Low Voltage AC, SELV AC)
Batteries IncludedYes
MaterialPlastic
Manufacturing ProcessMachine Made
Size25*15*7cm
Commodity Quality Certificationce
CertificationCE
OriginMainland China
Medical Supervision RequiredNo
High-Concerned ChemicalNone
Number of PiecesOne Unit
Package Weight0.251 kg
Package Dimensions26 x 12 x 7 cm

8. User Tips

  • For best results, use the device regularly as part of your skincare routine. Consistency is key.
  • Always use a conductive gel or a rich serum to ensure proper contact and maximize the effectiveness of the microcurrents and RF.
  • Some users find the green light setting particularly helpful for reducing facial inflammation.
  • You may feel a slight sensation or notice facial muscles moving, which is normal and indicates the EMS is working.

9. Safety Information

  • This device is for cosmetic use only and is not intended to diagnose, treat, cure, or prevent any medical condition.
  • Consult your doctor before use if you are pregnant, have a pacemaker, metal implants, epilepsy, heart conditions, or any other medical concerns.
  • Do not use on broken, irritated, or infected skin, open wounds, or areas with skin conditions like eczema or psoriasis.
  • Keep out of reach of children.
  • Do not use the device while charging.
  • If you experience any discomfort or adverse reactions, discontinue use immediately and consult a healthcare professional.

10. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for warranty purposes.

© 2024 VILNASON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.