1. Product Overview
The CARABC Wireless CarPlay & Android Auto Module integrates advanced smartphone connectivity into your vehicle's existing MIB/MIB2 infotainment system. It supports both wireless and wired CarPlay and Android Auto, providing navigation, music, phone calls, and voice control directly on your car's display.
Image 1.1: CARABC Module and Key Features (Wireless CarPlay, Android Auto, Airplay, Autolink)
Image 1.2: Wireless CarPlay Smart Module for Volkswagen highlighting features like Bluetooth, CarPlay, Android Auto, Factory Protocol, USB Play, Lossless Installation, Voice Control, Live Map, Online Entertainment.
2. Specifications
| Feature | Specification |
|---|---|
| Operating Voltage | 9-16V |
| Operating Temperature | -30°C to +75°C |
| Stored Temperature | -30°C to +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 500mA (rated), 3A (Max) |
| Shutdown Current | 3 mA (Clock is on) |
| Quiescent Current | Less than 3 mA |
| Charging Current | ≤2A (Host activates circuit protection if USB charging current > 1A to prevent burning) |
3. Compatibility Check
Before installation, please verify your car's compatibility with the module. This module is designed for Volkswagen, Skoda, and Seat vehicles equipped with MIB/MIB2 systems from 2012-2019.
Key Compatibility Indicators:
- Display Screen Size: Compatible with 5.8, 6.5, 7, 8, or 8.3-inch screens.
- CD Player Location: Your vehicle must have a CD player located in the glove box.
Image 3.1: Visual guide for checking display screen size and CD player location.
Compatible Car Models (2012-2019):
Image 3.2: Comprehensive list of compatible VW, Skoda, and Seat models.
- For VW: Golf 7 (2013-2019), Golf Sportsvan (2014-2019), GTI (2014-2019), Passat B8 (2014-2019), B8 Variant (2014-2019), Teramont (2014-2019), New Polo (2016-2019), T-Cross (2016-2019), Jetta (2016-2019), T-ROC (2016-2019), MOIA (2016-2019), Cross Blue (2016-2019)
- For Skoda: SUPERB-B (2014-2019), Octavia (2014-2019), KODIAQ (2014-2019), KOROC (2014-2019), KAMIQ (2014-2019)
- For Seat: Arona (2016-2019), New Leon (2016-2019), NEW IBIZA (2016-2019), Toledo Ateca (2016-2019)
4. Installation Guide
This section provides general installation instructions. For detailed visual guidance, please refer to the official user manual PDF referenced at the end of this document.
4.1. Dip Switch Configuration
CAUTION: Ensure CarPlay POWER is disconnected when adjusting the dip switches. Reconnect power only after settings are finalized.
The dip switches configure the module for your specific car model and screen size. Refer to the table below and the image for correct settings.
Image 4.1: Dip Switch Configuration Table for MIB/MIB2 VW Setting.
| Dip Switch 1 | Dip Switch 2 | Car Model |
|---|---|---|
| OFF | OFF | VW GOLF 7 |
| OFF | ON | Other Models |
| ON | OFF | Skoda Octavia |
| Dip Switch 3 | Dip Switch 4 | Screen Size |
|---|---|---|
| OFF | OFF | 400*240 (5.8") |
| OFF | ON | 800*480 (6.5"/7"/8") |
Note: For MMI systems with an INFO button, Dip Switch 4 must be set to ON.
4.2. Physical Connection
The module connects between your car's original head unit and display. This typically involves removing the head unit to access the necessary ports.
Image 4.2: Volkswagen MIB2 Installation Instruction Wiring Diagram.
- Power Cable: Connect the provided power cable to the module and the car's power source (Yellow: B+, Red: ACC, Black: GND).
- Wi-Fi Antenna: Connect the Wi-Fi antenna to the module. Note: Antennas cannot be attached to hardware surfaces.
- LVDS Cable: Connect the LVDS cable from the original head unit to the module, and then from the module to the original vehicle display. Ensure the host end of the LVDS cable is securely fastened.
- Other Connections:
- MIC: Connect the extra microphone port if using an aftermarket microphone.
- REAR-CVBS: Connect for rear view camera input.
- FRONT-CVBS: Connect for front view camera input.
- AUX: Audio output connection.
- USB: Connect for phone charging, USB disk media, or software updates.
Important: The video cable port is typically located as shown in the diagram (Q2: Which one is the video cable port).
4.3. Pre-installation Audio Setup
Before entering the installation system, ensure your car's audio is properly configured:
- Connect your phone to the original car's Bluetooth and select both call and media at the same time. Then, select the original car audio on the Bluetooth stereo interface.
- Alternatively, switch the original car sound channel to the AUX channel before entering the installation system.
5. Operating Instructions
5.1. Switching to the Module System
To switch from your car's original system to the CARABC module interface, long press the "MEDIA" button on your car's head unit for 3 seconds.
5.2. Wireless CarPlay Connection
- On your iPhone, enable Wi-Fi and Bluetooth.
- On the car's display, navigate to the Wireless CarPlay settings and click "Discover and connect device".
- Select your iPhone's Bluetooth device name (e.g., "CX_BT.....") and pair.
Image 5.1: Wireless CarPlay Connection Steps.
5.3. Wireless Android Auto Connection
- On your Android phone, enable Wi-Fi and Bluetooth.
- On the car's display, navigate to the Wireless Android Auto settings and click "CX-BTXXXX" (the device name) to pair.
Image 5.2: Wireless Android Auto Connection Steps.
5.4. Car Settings (Advanced Features)
The module provides various settings to customize your experience:
- Volume: Adjust the overall system volume.
- MIC Sensitivity: Adjust microphone input sensitivity.
- EQ: Equalizer settings for audio customization.
- Original MIC: Option to use the car's original microphone.
- Use the original Bluetooth Audio: Ensure this is set to OFF if you want audio through the module, or ON if you want to use the car's native Bluetooth for audio.
- Automatic echo cancellation: Enable/disable for call quality.
- Reverse camera added, original camera turned off: This indicates the system's behavior when an aftermarket reverse camera is connected.
Image 5.3: Advanced Features and Audio Settings Menu.
5.5. Reversing Video Input
The module supports both front and rear aftermarket cameras. Connect the camera power to the module's cam-power output and the video signal to the REAR-CVBS/FRONT-CVBS input (25FPS/30FPS AHD720P supported).
Image 5.4: Examples of reverse camera display in automatic and manual transmission vehicles.
5.6. Voice Operation Examples
Once connected, you can use voice commands for various functions:
- Navigation: "Enter address", "Home address"
- Telephone: "Call John cell phone", "Missed calls"
- Radio/Media: "Hitradio channel", "Select artist", "Set frequency", "Listen to CD"
6. Troubleshooting
- Screen doesn't show normally: Check the LVDS cable connection and ensure the DIP Switch settings are correct for your car model and screen size.
- Sound problems: Verify that the Multimedia settings and the original car's system settings are correctly configured, especially regarding Bluetooth and AUX audio sources.
- Mainframe pilot lamp not working: Inspect the power cable connection and check if the fuse is normal.
7. User Tips
- Installation Complexity: Installation can be intricate, especially routing cables behind the infotainment system. If you are not comfortable with car electronics or disassembling car parts, consider seeking professional installation.
- Cable Management: For vehicles like the VW Polo with challenging infotainment system placement, the module can often be pushed behind the infotainment system and routed to the passenger footwell for storage.
- Audio Setup: Always ensure your car's audio is set to the correct input (Bluetooth or AUX) before switching to the module's interface to avoid sound issues.
- Connectivity: The module typically uses Wi-Fi for the display signal and Bluetooth for audio. Ensure both are enabled and correctly paired on your phone.
- AirPlay Functionality: While supported, some users have reported AirPlay can be glitchy or cause screen blurriness. CarPlay and Android Auto generally offer more stable performance.
8. Frequently Asked Questions (FAQ)
- Q: Will this work on my VW Polo 2016 without steering wheel controls?
- A: Buyers report successful use in various VW Polo models, including those where installation required adjustments; core CarPlay and Android Auto functions work well regardless of steering wheel control presence.
- Q: Is it compatible with a VW Passat B8 2015 (MST2-EU-VW-ZR-PO140T, 3Q0035864)?
- A: Buyers report successful installations on various VW models including Passat B8, Golf 7, and Polo, with reliable CarPlay and Android Auto performance after setup.
- Q: Does it work on a VW Golf 2017?
- A: Multiple buyers confirm it works well on Golf Mk7 (including 2017 models), delivering responsive CarPlay and Android Auto after installation.
- Q: Does it support a flip reverse camera?
- A: The module supports aftermarket reverse cameras via the REAR-CVBS input. Specific functionality like 'flip' would depend on the camera itself and its compatibility with standard CVBS input.
- Q: Is it compatible with a Seat Leon FR 2015?
- A: Please refer to the detailed compatibility list in Section 3. If your model is listed and meets the MIB/MIB2 system requirements (screen size, CD player in glove box), it should be compatible.
- Q: Does it work on a Polo from 2010?
- A: The module is specified for 2012-2019 models. A 2010 Polo may not have the compatible MIB/MIB2 system. Please verify your car's infotainment system type.
9. Maintenance
To ensure optimal performance and longevity of your CARABC module:
- Keep the module and connections free from dust and moisture.
- Avoid exposing the module to extreme temperatures outside its specified operating range.
- Periodically check all cable connections to ensure they are secure.
- For software updates, refer to the USB connection instructions in Section 4.2 and consult the manufacturer's website for available updates.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact CARABC customer service through your purchase platform or the official CARABC website. Please have your product model and purchase details ready when contacting support.
A detailed user manual in PDF format is available for download: View User Manual (PDF)